Panasonic UB-5335 / UB-5835 (serv.man2) Service Manual ▷ View online
17
4.4.2.3.
About Screws and Bolts to be Used
• Be sure to use anchors and bolts which conform to the standard.
• The embedded depth of the anchor must be the manufacturer recommended values.
• When the anchor is the shape of male screw, use the M6 bolt.
• The length of the M6 bolt fitting length of 9 mm or more must be secured. (See figure below.)
• The embedded depth of the anchor must be the manufacturer recommended values.
• When the anchor is the shape of male screw, use the M6 bolt.
• The length of the M6 bolt fitting length of 9 mm or more must be secured. (See figure below.)
• Check that the screw is securely tightened so it does not touch the bottom of the M6 bolt anchor, etc.
• Recommended tightening torque: 5.2 N m (53 kgf cm)
• Recommended tightening torque: 5.2 N m (53 kgf cm)
18
4.5.
Attachment Operation (Board Attachment Upper (A1), Board Attachment
Lower (A2))
Lower (A2))
(1) Make marks on the wall using Installation Manual template
(TP).
(2) Create four holes in the wall with a drill.
(3) Embed the anchors.
19
(4) Fix the Board Attachment Upper (A1) and Board Attachment
Lower (A2) to the wall with the M6 bolts.
20
4.6.
Panaboard Installation
4.6.1.
Taking Out the Panaboard
(1) Take out the Panaboard from the carton box.
(2) Fold the carton box, remove the protection bag from the
screen unit, and place it on the carton box. Then, remove the
cushion from the Screen Unit.
cushion from the Screen Unit.
Note:
Do not touch the Screen surface as doing so may damage
it.
it.
Click on the first or last page to see other UB-5335 / UB-5835 (serv.man2) service manuals if exist.