Panasonic UB-5315SERIES / UB-5815SERIES (serv.man2) Service Manual ▷ View online
4.4.10. Hang the hook for the right panel of the Screen Unit to the Board Attachment
(Upper).
Caution
When extending the Screen Unit, touch the screen surface gently, not to damage it.
4.4.11. Fix the Screen Unit with the accessories 8 screws, 6 washers, and 6 spacers.
Note:
When attaching the screws, make sure to use the supplied wrench.
4.4.12. Adjust Screen Unit Height (Only in case of using the optional Stand)
See 4.9.
17
UB-5315 SERIES / UB-5815 SERIES
4.4.13. Hang the hooks of the Printer Unit to the square hole of the Board Attachment
(Lower).
Note:
1. The Printer Unit cannot be attached to the Board Attachment (Lower) or detached from its attachment when the Board
Attachment Frame is located at the lowest position.
In this case, lift up the frame to slide it to a higher position. (See 4.9.)
(*This Note 1 is available only for using the optional stand.)
2. When attaching the Printer Unit, make sure the cables are not caught between the Board Attachment (Lower) and the
Printer Unit.
18
UB-5315 SERIES / UB-5815 SERIES
4.4.14. Fix the Printer Unit with accessory screws.
Note:
4 screws are needed in case of the Optional Stand. Whereas 2 screws are needed in case of Wall-mounting.
19
UB-5315 SERIES / UB-5815 SERIES
4.4.15. Connect the 2 cables to the Screen Unit
4.4.16. Remove the screw and the Folding Support (Front) on the front side. And hang
its support on the back side to store it.
Note:
Store the screw in the compartment on the top of the Printer Unit (Position (A)) this section procedure “4.4.7” mentions.
20
UB-5315 SERIES / UB-5815 SERIES
Click on the first or last page to see other UB-5315SERIES / UB-5815SERIES (serv.man2) service manuals if exist.