Panasonic UB-5315SERIES / UB-5815SERIES (serv.man2) Service Manual ▷ View online
4.4.3. Collapse the carton box.
Remove the tape on the unopened side of the carton box, then collapse the box as the cushion. And lay the Panaboard on the box
to avoid any damage.
to avoid any damage.
Note:
Do not discard the carton box and packing material. They will be needed when repackaging the Panaboard.
4.4.4. Remove the protective plastic bag.
After removing the protective plastic bag from the Screen Unit and Printer Unit, set those units on the top of the collapsed carton
box. And remove the 4 cushions from the Screen Unit.
box. And remove the 4 cushions from the Screen Unit.
Note:
· Do not touch the Screen surface as doing so may damage it.
4.4.5. Attach the Screen Unit to the optional Stand or Wall-mounting Fixture.
After assembling the Board Attachment (Upper) [Wall-mounting Fixture (Upper)] and Board Attachment (Lower) [Wall-mounting
Fixture (Lower)] to Stand base, or to the wall, the following procedure is common in two installations (Stand, Wall) except for
adjusting Screen Unit Height on the Stand.
Fixture (Lower)] to Stand base, or to the wall, the following procedure is common in two installations (Stand, Wall) except for
adjusting Screen Unit Height on the Stand.
In this case, as the representative of the two installations, installation sample to the optional stand is shown below.
13
UB-5315 SERIES / UB-5815 SERIES
4.4.6. Hang the Screen Unit to the Board Attachment (Upper), gripping the Cover (Left)
and Cover (Right) of the Screen.
Slide the Screen Unit to the left until the screen hooks drop into the ditches of the Board Attachment (Upper). And continue to slide
the unit in the direction of the arrow (1) until it stops.
the unit in the direction of the arrow (1) until it stops.
Note:
Before hanging its unit, adjust the optional Stand height to the lowest position. (Regarding how to adjust its height, See 4.9.)
14
UB-5315 SERIES / UB-5815 SERIES
4.4.7. Remove the 2 wing bolts to release the folded screen portion and to remove the
cushion. (Remove the lower wing bolt first.)
Note:
Be sure to store the bolts in the compartment on the top of the Printer Unit (Position (A)), as shown on the figure.
15
UB-5315 SERIES / UB-5815 SERIES
4.4.8. Extend the Screen Unit of the 2
nd
(center) and 3
rd
(right) panels in the direction of
the arrow and remove the cushion.
Note:
When extending the Screen Unit, touch the screen surface gently, not to damage it.
4.4.9. Unlock the hook connecting the center panel to the right, to release the panels.
And extend the Screen Unit in the direction of the arrow after removing the
cushion behind the unit.
cushion behind the unit.
Note:
When extending the Screen Unit, touch the screen surface gently, not to damage it.
16
UB-5315 SERIES / UB-5815 SERIES
Click on the first or last page to see other UB-5315SERIES / UB-5815SERIES (serv.man2) service manuals if exist.