Panasonic KV-S7097 / KV-S7077 Service Manual ▷ View online
45
(3) Remove the 1 connector (CN1) to the PANEL Board and
separate the Front Cover from the scanner in the direction of
the arrow.
separate the Front Cover from the scanner in the direction of
the arrow.
Reassembling Note:reassembling the Front Cover
a. Remove the Panel from the Front Cover. (See 8.2.4.)
b. Install the Front Cover only on the scanner.
b. Install the Front Cover only on the scanner.
(Make sure that the flat cables are covered properly so
that they are not pinched by the cover.)
that they are not pinched by the cover.)
c. Connect the connector (CN1) to the PANEL Board and
install the Panel on the Front Cover.
46
8.2.4.
PANEL Board
8.2.5.
Back Cover
(1) Remove the Front Cover. (See 8.2.3.)
(2) Release the 2 hooks to separate the PANEL Board with the
Panel from the Front Cover.
Panel from the Front Cover.
Reassembling Note:reassembling the PANEL Board
a. First install the Front Cover only on the scanner.
(Make sure that the flat cables are covered properly so
that they are not pinched by the cover. Refer to the
note of 8.2.3.)
that they are not pinched by the cover. Refer to the
note of 8.2.3.)
b. Connect the connector (CN1) to the PANEL Board and
install the Panel on the Front Cover.
(3) Remove the 3 screws to separate the board from the panel.
(1) Remove the Document Cover. (See 8.2.2.)
(2) Remove the 6 screws to separate the
Back Cover from the scanner.
Back Cover from the scanner.
47
8.2.6.
DOCUMENT COVER DETECTOR Board
8.2.7.
Flatbed Conveyor
(1) Remove the Back Cover. (See 8.2.5.)
(2) Remove the 1 screw and 1 connector to release the
DOCUMENT COVER DETECTOR Board.
DOCUMENT COVER DETECTOR Board.
(1) Open the Exit Door. (See 8.2.1.)
(2) Remove the 4 screws to separate the Flatbed Conveyor.
Reassembling Note:
Be sure to match the projections on the conveyor with
the holes of the flatbed, and attach it to the scanner.
the holes of the flatbed, and attach it to the scanner.
48
8.2.8.
Side Cover (L)
8.2.9.
Side Cover (R)
8.2.10.
Flatbed Glass
(1) Remove the Front Cover. (See 8.2.3.)
(2) Remove the Back Cover. (See 8.2.5.)
(3) Remove the 3 screws to separate the Side Cover (L) from
the
scanner.
the
scanner.
(1) Remove the Front Cover. (See 8.2.3.)
(2) Remove the Back Cover. (See 8.2.5.)
(3) Remove the 2 screws (a) and 1 screw (b) to release the Side
Cover (R) from the scanner.
Cover (R) from the scanner.
(1) Remove the Flatbed Conveyor. (See 8.2.7.)
(2) Remove the Side Cover (R). (See 8.2.9.)
(3) Remove the 4 screws and lift the Flatbed Glass to remove it.
Reassembling Note:
With the included Roller Cleaning Paper or Model
KV-SS03 (Option: Roller Cleaning Paper), be sure to
clean up fingerprints and dust from the glass.
Otherwise, image scanning quality may be affected.
KV-SS03 (Option: Roller Cleaning Paper), be sure to
clean up fingerprints and dust from the glass.
Otherwise, image scanning quality may be affected.
Click on the first or last page to see other KV-S7097 / KV-S7077 service manuals if exist.