Panasonic KV-S5076H / KV-S5046H Service Manual ▷ View online
53
8.3.5.
Sub Exit Conveyor Assembly
1. Remove the CIS(F) RELAY Board. (See 8.3.4.)
2. Remove the 3 screws.
3. Release the 3 claws of the Sub Exit Conveyor Assembly to
remove it.
remove it.
54
8.4.
Upper Block
8.4.1.
Paper Feed Module
1. Push the ADF Door Release to open the ADF Door.
2. Move the lever (A) of the Paper Feed Roller Module in the
order indicated by the arrows ((1), (2)), and then pull out the
module towards you.
order indicated by the arrows ((1), (2)), and then pull out the
module towards you.
3. Remove Feed Unit Fulcrum, Feed Unit Lock Lever and
poly-slider.
poly-slider.
4. Remove Paper Feed Roller and Separation Roller.
55
5. Remove Paper Feed Roller from the each parts.
6. Paper Feed Roller.
Reassembling Note:
Carry out △ mark to direction off the figure, and press it fit.
56
8.4.2.
CIS(F) Unit
1. CIS which Light Unit and Scanning Glass were unified is
immobilized in the main flame by 2 screws.
immobilized in the main flame by 2 screws.
2. Disconnect Flat cable.
Click on the first or last page to see other KV-S5076H / KV-S5046H service manuals if exist.