DOWNLOAD Panasonic KV-S5076H / KV-S5046H Service Manual ↓ Size: 36.94 MB | Pages: 127 in PDF or view online for FREE

37

With a soft and dry cloth, wipe off any dirt on the conveyor (A ).

(A)

With a soft and dry cloth, wipe off any dirt on the self-cleaning brushes (C , D ) of the reference plates
(A , B ).

•

Push E  and F  in the direction indicated by the arrow to rotate the reference plate on the ADF door
side so that you can clean the brush. In the same way, push G and H in the direction indicated by the
arrow to rotate the reference plate on the main unit side to clean the brush.

(Ｅ)

(C)

(F)

(B)

(A)

(G)

(D)

(H)

38

Remove dust from the ion outlets (A ) with a cotton swab.

•

With a thin cotton swab, remove dust from the ion outlets, and then wipe the center of the inner parts
approximately 5 times.

(A)

•

Do not apply too much pressure on the parts.

Remove dust from the sensors (A , B , C , D , E , F ) and reflectors (G ) with a cotton swab.

(A)

(C)

(D)

(E)

(B)

(B)

(F)

A

Waiting sensor

B

Double feed detector

C

Slip detect sensor

D

Starting sensor

E

Paper sensor

F

Skew sensor

39

(G)

(G)

G

Reflectors

40

Use the roller cleaning paper (page 3) to remove the dirt from the surfaces of all rollers.

Double feed prevention roller, Separation roller

Other rollers

•

After removing the double feed prevention roller, gently wipe dirt from the surface of the roller in
the direction indicated by the arrows in the illustration. If you wipe too hard, you may damage or
misalign the roller.
For instructions on how to remove the double feed prevention roller, see "Replacing the
Rollers" (See 8.5.13).

•

Wipe dirt off of the other rollers in the directions indicated by the arrows in the illustration. Use your
finger to rotate the roller and wipe dirt off of the entire surface of the roller. If the roller rotates when
wiping it, gently hold it in place with your finger.