Panasonic KV-S5076H / KV-S5046H Service Manual ▷ View online
33
7.2.
Cleaning
7.2.1.
Preparation
1.
Prepare the following cleaning supplies.
•
Soft and dry cloth
Used to clean the conveyor.
Used to clean the conveyor.
•
Thin cotton swab
Used to clean the ion outlets and sensors.
Used to clean the ion outlets and sensors.
•
Roller cleaning paper (KV-SS03)
Used to clean the rollers, scanning backgrounds, and scanning glasses.
Use of the roller cleaning paper is recommended. If you do not have the roller cleaning paper, use a
soft cloth with a small amount of isopropyl alcohol or water.
Do not use commercially available cleaners, detergent, thinner, or benzine. (Doing so may cause
deformation, discoloration or damage.)
Used to clean the rollers, scanning backgrounds, and scanning glasses.
Use of the roller cleaning paper is recommended. If you do not have the roller cleaning paper, use a
soft cloth with a small amount of isopropyl alcohol or water.
Do not use commercially available cleaners, detergent, thinner, or benzine. (Doing so may cause
deformation, discoloration or damage.)
2.
Press and hold the power button for one second or more to turn off the unit’s power.
3.
Push the ADF door release (A ) upwards, and open the ADF door (B ).
(A)
(B)
4.
Clean the conveyor, sensors, rollers, scanning backgrounds, and scanning glasses.
•
Clean the parts in the following order: conveyor, ion outlets and sensors, rollers, scanning backgrounds,
scanning glasses.
scanning glasses.
•
For details about cleaning, refer to the following:
–
"Cleaning the Conveyor" (page 3)
–
"Cleaning the Ion Outlets and Sensors" (page 3)
–
"Cleaning the Rollers" (page 4)
–
"Cleaning the Scanning Backgrounds" (page 4)
–
"Cleaning the Scanning Glasses" (page 4)
34
5.
Close the ADF door.
•
After cleaning, push both sides of the ADF door down slowly until it clicks into place.
6.
Press the power button to turn on the unit’s power.
Notice
•
If roller cleaning notifications via the After Clean Roller Counter are enabled, after turning on the
unit’s power, reset the After Clean Roller Counter in User Utility to 0.
For details, refer to the User Utility help.
unit’s power, reset the After Clean Roller Counter in User Utility to 0.
For details, refer to the User Utility help.
35
7.2.2.
Cleaning-1 (Main)
Following the instructions in figures Fig.7.2.2-1, wipe dust from the surface of the following parts in order to maintain
high scanning performance.
Note:
high scanning performance.
Note:
After cleaning the Paper Feed Roller, Separation Roller, and Double-feed Prevention Roller, execute
“Clear Counter for cleaning roller” with Service Utility. (See 9.3.4.)
“Clear Counter for cleaning roller” with Service Utility. (See 9.3.4.)
(Fig. 7.2.2-1) Cleaning Parts and Action
**
Action Code means cleaning methods as follows.
C: Clean each surface with the included Roller Cleaning Paper or Model KV-SS03. (Option: Roller Cleaning Paper)
B: Clean up with the cotton swab.
Caution:
*1
• The Scanning Glass (F), Scanning Glass (B), and their surroundings may be hot after scanning a lot of documents
continuously. Be sure to allow the inside of the scanner to cool down before performing any maintenance
or coming in contact with the inside of the unit.
or coming in contact with the inside of the unit.
Note 1: Roller Cleaning Paper
• Open the bag on the dotted line and take out the Roller Cleaning Paper.
• If the bag is left open for a long period of time before using it, the alcohol will evaporate. Please use the Roller
Cleaning Paper immediately after opening the bag.
• The Roller Cleaning Paper (KV-SS03 Option) is available from sales channel.
Description
**
Action Code
Remarks
Paper Feed Roller
C
1. After cleaning these three rollers, execute “Clear
Counter for cleaning roller” with Service Utility.
(See 9.3.4.)
2. Refer to Note 1 (Roller Cleaning Paper).
Counter for cleaning roller” with Service Utility.
(See 9.3.4.)
2. Refer to Note 1 (Roller Cleaning Paper).
*2
Separation Roller
C
*2
Double-feed Prevention Roller
C
Drive Roller 1
C
Refer to Note 1 (Roller Cleaning Paper).
Drive Roller 2
C
Drive Roller 3
C
Exit Roller
C
Free Roller 1
C
Free Roller 2
C
Free Roller 3
C
*1
Scanning Glass (F)
C
*1
Scanning Glass (B)
C
Reference Plate (F)
C, B
Refer to Note 1 (Roller Cleaning Paper).
Refer to Note 2 (How to clean sensors (detectors)).
Refer to Note 2 (How to clean sensors (detectors)).
Reference Plate (B)
C, B
Ionizer (Ion outlet)
B
1. Refer to Note 2 (How to clean sensors (detectors)).
Reference Sheets for sensors
B
Paper Sensor
B
Waiting Sensor (on the USS / WAITING SENSOR
Board)
Board)
B
Starting Sensor (Board)
B
Slit Detect Sensor (Board)
B
Exit Sensor (on the ENDING SENSOR Board)
B
Double Feed Detector (G)
B
Double Feed Detector (R)
B
36
Note 2: In case that a scanning problem on the image quality (line) or on the performance of conveying still occurs,
with a vacuum cleaner, remove any staples and paper dust inside and outside the scanning glass,
being careful not to scratch the glass surface or its surroundings.
being careful not to scratch the glass surface or its surroundings.
Note 3:
*2
Direction for wiping rollers
Click on the first or last page to see other KV-S5076H / KV-S5046H service manuals if exist.