Panasonic KV-S2048C Service Manual ▷ View online
21
(3) Wipe off the glass surface on the CIS (Back) and the
Sensor Roller (Front) in the direction of the arrows shown
in the figure with the accessory Roller Cleaning Paper or
KV-SS03 Option (Roller Cleaning Paper).
Sensor Roller (Front) in the direction of the arrows shown
in the figure with the accessory Roller Cleaning Paper or
KV-SS03 Option (Roller Cleaning Paper).
(4) Wipe off the glass surface on the CIS (Front) and the
Sensor Roller (Back) in the direction of the arrows shown
in the figure with the accessory Roller Cleaning Paper or
KV-SS03 Option (Roller Cleaning Paper).
Sensor Roller (Back) in the direction of the arrows shown
in the figure with the accessory Roller Cleaning Paper or
KV-SS03 Option (Roller Cleaning Paper).
(5) Close the ADF Door slowly until it clicks into place.
22
7.2.4.
Cleaning Sensor and Reflector Sheets
(1) Turn off the scanner.
(2) Push the ADF Door Release to open the ADF Door.
(3) Sweep out the dirt from the Paper Detector, Waiting Sensor
Starting Position Sensor, and Double Feed Detector (R) with
a soft cotton swab.
Starting Position Sensor, and Double Feed Detector (R) with
a soft cotton swab.
(4) Sweep out the dirt from the Double Feed Detector (G)
and Reflector Sheets for the Waiting Sensor and Starting
Position Sensor with a soft cotton swab.
and Reflector Sheets for the Waiting Sensor and Starting
Position Sensor with a soft cotton swab.
23
7.2.5.
Cleaning Exit Roller, Paper Release Roller, and Ending Sensor
(5) Close the ADF Door slowly until it clicks into place.
(1) Remove the Exit Roller. (See 8.3.8.)
(2) Clean the surfaces of the Exit Roller in the direction of the
arrows with the accessory Roller Cleaning Paper or
KV-SS03 Option (Roller Cleaning Paper).
arrows with the accessory Roller Cleaning Paper or
KV-SS03 Option (Roller Cleaning Paper).
(3) Clean the surfaces of the Paper Release Roller in the
direction of the arrows with the accessory Roller Cleaning
Paper or KV-SS03 Option (Roller Cleaning Paper).
direction of the arrows with the accessory Roller Cleaning
Paper or KV-SS03 Option (Roller Cleaning Paper).
(4) Sweep out the dirt from the Ending Sensor and its Reflector
Sheet with a soft cotton swab.
Sheet with a soft cotton swab.
24
7.3.
Replacing Limited Life Parts
7.3.1.
Replacing Paper Feed Roller Module
(1) Turn off the scanner.
(2) Push the ADF Door Release to open the ADF Door.
(3) Push down the two Green Levers at both ends of the Paper
Feed Roller Module to unlock its module.
Feed Roller Module to unlock its module.
Note
When moving the Green Levers, do not apply pressure in
any direction other than in the direction of the arrows.
Otherwise, they may break.
When moving the Green Levers, do not apply pressure in
any direction other than in the direction of the arrows.
Otherwise, they may break.
Click on the first or last page to see other KV-S2048C service manuals if exist.