Panasonic KV-S2025C / KV-SU225C / KV-S2045C / KV-SU245C Service Manual ▷ View online
4.3.
Connecting the Scanner to a Personal Computer
4.3.1.
KV-S2025C/S2045C Series
Fig. 4.3.1
Note
Power Cord shown on the Fig. 4.3.1 is for AC100-120V.
Caution
1. Use the Power Cord that is supplied with the scanner manufacturer.
2. Use SCSI cables as short as possible, securing SCSI specification.
3. After turning off the scanner and PC, remove SCSI cables.
4.4.
System Requirements
4.4.1.
KV-S2025C/S2045C Series
CPU
Minimum: Pentium
®
300MHz
Recommended: Pentium
®
800MHz or higher
Memory (RAM)
[Black & White Scanning]
Minimum: 128MB
Recommended: 256MB or higher
[Color Scanning]
Minimum: 256MB
Recommended: 512MB or higher
Minimum: 128MB
Recommended: 256MB or higher
[Color Scanning]
Minimum: 256MB
Recommended: 512MB or higher
OS
Windows
®
95 / Windows
®
98 / Windows
®
Me / Windows NT
®
/ Windows
®
2000 / Windows
®
XP
SCSI Board
Adaptec SCSI card 2930U / 2940U / 29160N / 19160
Note
The scanning speed differs depending on the personal computer´s operating environment or application.
9
KV-S2025C Series / KV-SU225C Series / KV-S2045C Series / KV-SU245C Series
4.5.
SCSI Setting (Only for KV-S2025C/S2045C Series)
Set SCSI ID and Terminator on the DIP Switch whose layout is shown on Fig. 4.5.1.
Fig. 4.5.1
4.5.1.
SCSI ID
Referring to the following Fig. 4.5.2, be sure to set a scanner´s SCSI ID number of the DIP Switch, different from the other SCSI
device in the SCSI chain.
device in the SCSI chain.
Fig. 4.5.2
SCSI ID
Number
DIP Switch Setting
Remarks
ID2
ID1
ID0
0
OFF
OFF
OFF
1
OFF
OFF
ON
2
OFF
ON
OFF
3
OFF
ON
ON
4
ON
OFF
OFF
5
ON
OFF
ON
6
ON
ON
OFF
KME Factory Default
7
ON
ON
ON
Note
It is not until restarting the PC after restarting the scanner that Setting "SCSI ID" will be activated.
4.5.2.
Terminator
According to the SCSI interface condition, set the Terminator (TERM) ON or OFF.
Note
1. If the scanner is the last or the only device in the SCSI chain, the terminator should be set to "ON".
2. It is not until restarting the PC after restarting the scanner that Setting "Terminator ON or OFF" will be activated.
10
KV-S2025C Series / KV-SU225C Series / KV-S2045C Series / KV-SU245C Series
5 SECTIONAL VIEWS
5.1.
CIS (Contact Image Sensor)
Sensor Roller (Back)
Sensor Roller (Front)
CIS (Back)
CIS (Front)
Imprinter (Option)
(KV-S2045C/SU245C Series only)
(KV-S2045C/SU245C Series only)
Conveyor Motor
Paper Feed Motor
11
KV-S2025C Series / KV-SU225C Series / KV-S2045C Series / KV-SU245C Series
5.2.
Rollers
Exit Roller
Drive Rollers
Retard Roller
Separation Roller
Paper Feed Roller
12
KV-S2025C Series / KV-SU225C Series / KV-S2045C Series / KV-SU245C Series
Click on the first or last page to see other KV-S2025C / KV-SU225C / KV-S2045C / KV-SU245C service manuals if exist.