Panasonic KV-S2025C / KV-SU225C / KV-S2045C / KV-SU245C Service Manual ▷ View online
8.3.6.
Drive Belt
(1)
Remove the Side Cover (L). (See 8.2.2.)
(2)
Loosen the 2 screws and remove the Drive Belt.
8.3.7.
Drive Rollers
(1)
Remove the Drive Belt. (See 8.3.6.)
(2)
Remove the Conveyor 1. (See 8.3.2.)
(3)
Remove the Conveyor 2. (See 8.3.3.)
(4)
Unhook the Drive Rollers from the notching hole of chassis.
(5)
Pull out the Drive Rollers in the direction of the arrows,
holding them upward.
holding them upward.
45
KV-S2025C Series / KV-SU225C Series / KV-S2045C Series / KV-SU245C Series
8.3.8.
Exit Roller
(1)
Remove the Inner Cover (Upper). (See 8.2.7.)
(2)
Remove the Drive Belt. (See 8.3.6.)
(3)
Remove the 2 screws to remove the Plate A.
(4)
Unhook the Exit Roller from the notching hole of chassis to
pull out it.
pull out it.
8.3.9.
Sensor Roller (Front)
(1)
Push the ADF Door Release to open the ADF Door.
(2)
Remove the Sensor Roller (Front), rolling it in the direction
of the arrow.
of the arrow.
8.3.10.
Sensor Roller (Back)
(1)
Push the ADF Door Release to open the ADF Door.
(2)
Unhook the lock at both ends of the Roller pushing springs
in the direction of the arrows and remove the Sensor Roller
(Back).
in the direction of the arrows and remove the Sensor Roller
(Back).
46
KV-S2025C Series / KV-SU225C Series / KV-S2045C Series / KV-SU245C Series
8.3.11.
Paper Feed Roller Module
(1)
Push the ADF Door Release to open the ADF Door.
(2)
Push down the two Green Levers at both ends of the Paper
Feed Roller Module to unlock its module.
Feed Roller Module to unlock its module.
Note
When moving the Green Levers, do not apply
pressure in any direction other than in the direction
of the arrows. Otherwise, they may break.
pressure in any direction other than in the direction
of the arrows. Otherwise, they may break.
(3)
Remove the Paper Feed Roller Module, holding up the
Paper Feed Case along the groove of the Feed Cover to
pull out the claw of the case.
Paper Feed Case along the groove of the Feed Cover to
pull out the claw of the case.
Reassembling Note
a. Attach the bearings at both ends of the Paper
Feed Roller Module into the guide grooves of the
chassis in the scanner.
chassis in the scanner.
b. Insert the claw of the Paper Feed Case along the
groove of the Feed Cover.
c. Push up the two Green Levers at both ends of
the Paper Feed Module to fix its module to the
scanner.
scanner.
47
KV-S2025C Series / KV-SU225C Series / KV-S2045C Series / KV-SU245C Series
8.3.12.
Retard Roller Module
(1)
Push the ADF Door Release to open the ADF Door.
(2)
Remove the Retard Roller Cover in the direction of the
arrow.
arrow.
(3)
Pull up the Retard Roller Module in the direction of the
arrow to remove it.
arrow to remove it.
Reassembling Note
Install a new Retard Roller Module with the wider
groove of its shaft on the left and match it to the left
side of the metal holder.
groove of its shaft on the left and match it to the left
side of the metal holder.
48
KV-S2025C Series / KV-SU225C Series / KV-S2045C Series / KV-SU245C Series
Click on the first or last page to see other KV-S2025C / KV-SU225C / KV-S2045C / KV-SU245C service manuals if exist.