Panasonic KV-S1065C / KV-S1046C (serv.man3) Service Manual ▷ View online
13
4.2.1.
Installing Feed Tray
(1) Take the Feed Tray out of the included carton box, and
attach the tray to the scanner in the direction of the arrows.
attach the tray to the scanner in the direction of the arrows.
(2) Pull out the Feed Tray Extension in the direction of the
arrow as required.
arrow as required.
14
4.2.2.
Setting Exit Tray
(1) Open the Exit Stopper.
(2) Pull out the Exit Tray in the direction of the arrow.
(3) Pull out the Exit Tray Extension as required.
15
4.2.3.
Installing Mixed Batch Card Guide (useful for scanning a card along with a docu-
ment)
ment)
4.2.4.
Scanning Documents and/or Card
Case 1: When scanning paper documents only.
Set the paper documents on the Feed Tray.
Set the paper documents on the Feed Tray.
Case 2: When scanning cards only.
Set the cards on the Feed Tray.
Set the cards on the Feed Tray.
Case 3: When scanning paper documents and a card at the same time.
Set the paper documents on the Feed Tray, and set the card on the Mixed Batch Card Guide.
Set the paper documents on the Feed Tray, and set the card on the Mixed Batch Card Guide.
Note:
*1: The height of all the documents should be less than 7.5mm (0.3in.)
*2: The height of the cards should be less than 5mm(0.2in.)
*3: The height of all the documents should be less than 2mm (0.08in.)
*4: When using the Mixed Batch Card Guide, the document guides can not be adjusted to a width
smaller than A5.
*5: ISO format card
Size: 85.6 x 54.0 mm (3.4 x 2.1 in.), Thickness: 0.76 mm (0.03 in.)
Embossed card is also supported.
*2: The height of the cards should be less than 5mm(0.2in.)
*3: The height of all the documents should be less than 2mm (0.08in.)
*4: When using the Mixed Batch Card Guide, the document guides can not be adjusted to a width
smaller than A5.
*5: ISO format card
Size: 85.6 x 54.0 mm (3.4 x 2.1 in.), Thickness: 0.76 mm (0.03 in.)
Embossed card is also supported.
(1) Attach the Mixed Batch Card Guide by inserting its tips
into the holes near the Door Open Button.
into the holes near the Door Open Button.
Note: Storing the Mixed Batch Card Guide
When not using the guide, be sure to keep it
When not using the guide, be sure to keep it
on the back side of the Feed Tray.
Documents only
Card only
Documents and Card
Mixed scanning (Paper and Card)
-
-
Available only by
using Mixed Batch
Card Guide
using Mixed Batch
Card Guide
Paper (80 g/m
2
or 20lb)
75 sheets
*1
-
20 sheets
*3 ,*4
Card
*5
-
3 cards
*2
1 card
*3 ,*4
16
4.3.
Connecting the Scanner to a Personal Computer
Note:
The Power Cord shown in the figure above is for AC 100-120 V.
Caution
1. Only use the AC Adaptor, Power Cord, and USB Cable included with this scanner.
2. Be sure to connect the scanner directly to a USB port on the PC. We cannot guarantee that the scanner will work
properly if it is connected to a USB hub.
2. Be sure to connect the scanner directly to a USB port on the PC. We cannot guarantee that the scanner will work
properly if it is connected to a USB hub.
Click on the first or last page to see other KV-S1065C / KV-S1046C (serv.man3) service manuals if exist.