Panasonic KV-S1058Y / KV-S1028Y / KV-S1057C-M2 / KV-S1057C-J2 / KV-S1027C-M2 / KV-S1027C-J2 Service Manual ▷ View online
7
2.2.1.
Suggested PbF Solder
There are several types of PbF solder available commercially. While this product is manufactured using Tin, Silver, and Copper,
(Sn+Ag+Cu), you can also use Tin and Copper, (Sn+Cu), or Tin, Zinc, and Bismuth, (Sn+Zn+Bi). Please check the manufac
turer's specific instructions for the melting points of their products and any precautions for using their product with other
materials.
The following lead free (PbF) solder wire sizes are recommended for service of this product: 0.3mm, 0.6mm and 1.0mm.
(Sn+Ag+Cu), you can also use Tin and Copper, (Sn+Cu), or Tin, Zinc, and Bismuth, (Sn+Zn+Bi). Please check the manufac
turer's specific instructions for the melting points of their products and any precautions for using their product with other
materials.
The following lead free (PbF) solder wire sizes are recommended for service of this product: 0.3mm, 0.6mm and 1.0mm.
2.3.
Battery Caution
CAUTION For U.S.A. model
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the
manufacturer. Discard used batteries according to following caution:
Disposal of lithium batteries should be performed by permitted, professional disposal firms knowledgeable in state government
federal and local hazardous materials and hazardous waste transportation and disposal requirements.
A battery continues to have no transportation limitations as long as it is separated to prevent short circuits and packed in strong
packaging.
Commercial firms that dispose of any quantity of lithium cells should have a mechanism in place to account for their ultimate
disposition. This is a good practice for all types of commercial or industrial waste.
manufacturer. Discard used batteries according to following caution:
Disposal of lithium batteries should be performed by permitted, professional disposal firms knowledgeable in state government
federal and local hazardous materials and hazardous waste transportation and disposal requirements.
A battery continues to have no transportation limitations as long as it is separated to prevent short circuits and packed in strong
packaging.
Commercial firms that dispose of any quantity of lithium cells should have a mechanism in place to account for their ultimate
disposition. This is a good practice for all types of commercial or industrial waste.
Recommend Type Number:
CR2354(B1)
CR2354(B1)
This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material – special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
See www.dtsc.ca.gov/hazardouswaste/perchlorate
CAUTION Except For U.S.A. model
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the
manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
The lithium battery is a critical component (type No. CR2354).
Please observe for the proper polarity and the exact location when replacing it and soldering the replacement lithium battery in.
manufacturer.
Dispose of used batteries according to the manufacturer's instructions.
The lithium battery is a critical component (type No. CR2354).
Please observe for the proper polarity and the exact location when replacing it and soldering the replacement lithium battery in.
8
2.3.1.
Disposal of used Batteries and old Equipment
(1)
(2)
These symbols ((1), (2)) on the products, packaging, and/or accompanying documents mean that used electrical and
electronic products and batteries must not be mixed with general household waste.For proper treatment, recovery and
recycling of old products and used batteries, please take them to applicable collection points in accordance with your
national legislation.By disposing of them correctly, you will help to save valuable resources and prevent any potential
negative effects on human health and the environment. For more information about collection and recycling, please contact
your local municipality.Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
electronic products and batteries must not be mixed with general household waste.For proper treatment, recovery and
recycling of old products and used batteries, please take them to applicable collection points in accordance with your
national legislation.By disposing of them correctly, you will help to save valuable resources and prevent any potential
negative effects on human health and the environment. For more information about collection and recycling, please contact
your local municipality.Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union
These symbols ((1), (2)) are only valid in the European Union. If you wish to discard these items, please contact your local
authorities or dealer and ask for the correct method of disposal.
These symbols ((1), (2)) are only valid in the European Union. If you wish to discard these items, please contact your local
authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol
This symbol ((2)) might be used in combination with a chemical symbol. In this case it complies with the requirement set by
the Directive for the chemical involved.
This symbol ((2)) might be used in combination with a chemical symbol. In this case it complies with the requirement set by
the Directive for the chemical involved.
Disposal of Old Equipment and Batteries
(Only for European Union and countries with recycling systems)
(Only for European Union and countries with recycling systems)
(1)
(2)
Diese Symbole ((1), (2)) auf den Produkten, der Verpackungen und/oder den Begleitdokumenten, bedeutet, dass gebrauchte
elektrische und elektronische Produkte nicht in den allgemeinen Hausmüll gegeben werden dürfen.Bitte führen Sie alte Produkte
zur Behandlung, Aufarbeitung bzw. zum Recycling gemäß den gesetzlichen Bestimmungen den zuständigen Sammelpunkten
zu.Indem Sie diese Produkte ordnungsgemäß entsorgen, helfen Sie dabei, wertvolle Ressourcen zu schützen und eventuelle
negative Auswirkungen auf die menschliche Gesundheit und die Umwelt zu vermeiden. Für mehr Informationen zu Sammlung und
Recycling, wenden Sie sich bitte an Ihren örtlichen.
elektrische und elektronische Produkte nicht in den allgemeinen Hausmüll gegeben werden dürfen.Bitte führen Sie alte Produkte
zur Behandlung, Aufarbeitung bzw. zum Recycling gemäß den gesetzlichen Bestimmungen den zuständigen Sammelpunkten
zu.Indem Sie diese Produkte ordnungsgemäß entsorgen, helfen Sie dabei, wertvolle Ressourcen zu schützen und eventuelle
negative Auswirkungen auf die menschliche Gesundheit und die Umwelt zu vermeiden. Für mehr Informationen zu Sammlung und
Recycling, wenden Sie sich bitte an Ihren örtlichen.
Für geschäftliche Nutzer in der Europäischen Union
Wenn Sie elektrische oder elektronische Geräte entsorgen möchten, wenden Sie sich wegen genauerer Informationen bitte an Ihren
Händler oder Lieferanten.
Wenn Sie elektrische oder elektronische Geräte entsorgen möchten, wenden Sie sich wegen genauerer Informationen bitte an Ihren
Händler oder Lieferanten.
Informationen zur Entsorgung in Ländern außerhalb der Europäischen Union
Diese Symbole ((1), (2)) gelten nur innerhalb der Europäischen Union. Wenn Sie solche Gegenstände entsorgen möchten, erfragen Sie
bitte bei den örtlichen Behörden oder Ihrem Händler, welches die ordnungsgemäße Entsorgungsmethode ist.
Diese Symbole ((1), (2)) gelten nur innerhalb der Europäischen Union. Wenn Sie solche Gegenstände entsorgen möchten, erfragen Sie
bitte bei den örtlichen Behörden oder Ihrem Händler, welches die ordnungsgemäße Entsorgungsmethode ist.
Hinweis zum Batteriesymbol
Dieses Symbol ((2)) kann in Kombination mit einem chemischen Symbol verwendet werden. In diesem Fall erfüllt es die
Anforderungen derjenigen Richtlinie, die für die betreffende Chemikalie erlassen wurde.
Dieses Symbol ((2)) kann in Kombination mit einem chemischen Symbol verwendet werden. In diesem Fall erfüllt es die
Anforderungen derjenigen Richtlinie, die für die betreffende Chemikalie erlassen wurde.
Entsorgung von veralteten Geraten und benutzten Batterien
(Nur für die Europäische Union und Länder mit Recyclingsystemen)
(Nur für die Europäische Union und Länder mit Recyclingsystemen)
2.3.1 Entsorgung von veralteten Geraten und benutzten Batterien
9
3 Specifications
Scanning
*1 The scanning speed differs depending on the host computer, the operating system, the application, the measuring method, the
quantity of data in the image, and the paper type. The scanning speed depends on a measuring method of Panasonic. In case of using
this unit with a LAN connection, the scanning speed may be slower due to network traffic.
this unit with a LAN connection, the scanning speed may be slower due to network traffic.
*2 When scanning a document larger than A5 size at high resolutions over 600 dpi, the scanning may fail due to insufficient memory.
*3 For details, see "Compatible Paper". Refer to 16. Appendix (Operating Manual P.28)
*4 Using "Long Paper", you can scan long documents by splitting them into smaller parts. For details about "Long Paper", refer to the
*3 For details, see "Compatible Paper". Refer to 16. Appendix (Operating Manual P.28)
*4 Using "Long Paper", you can scan long documents by splitting them into smaller parts. For details about "Long Paper", refer to the
Image Capture Plus, TWAIN, or ISIS help.
*5 For details, see "Compatible Card". Refer to 16. Appendix (Operating Manual P.30).
*6 Use the carrier sheet (KV-SS077) to scan passport. Refer to 16. Appendix (Operating Manual P.31).
*7 Paper less than 100 mm (3.9 in.) long or legal size paper: 75 sheets
*8 For details, see "Replacing the Rollers". Refer to 16. Appendix (Operating Manual P.68).
*6 Use the carrier sheet (KV-SS077) to scan passport. Refer to 16. Appendix (Operating Manual P.31).
*7 Paper less than 100 mm (3.9 in.) long or legal size paper: 75 sheets
*8 For details, see "Replacing the Rollers". Refer to 16. Appendix (Operating Manual P.68).
Item
KV-S1058Y
KV-S1057C-M2/J2
KV-S1028Y
KV-S1027C-M2/J2
Scanning face
Duplex
Scanning method
1 line Color CIS (300 dpi/600 dpi)
Scanning speed
*1
• A4 / Portrait
• Binary / color
• (200 dpi,
300 dpi)
• Binary / color
• (200 dpi,
300 dpi)
ADF (Simplex)
65 pages/min. 45 pages/min.
ADF (Duplex)
130 images/min.
90 images/min.
Scanning resolution
*2
100 – 600 dpi (1 dpi step), 1,200 dpi (Interpolated)
Optical: 300 dpi / 600 dpi (Automatic switch)
Optical: 300 dpi / 600 dpi (Automatic switch)
Paper size
*3
Width × Length
When feeding one sheet:
48 mm × 54 mm - 216 mm × unlimited (1.9 in. × 2.1 in. - 8.5 in. × unlimited)
48 mm × 54 mm - 216 mm × unlimited (1.9 in. × 2.1 in. - 8.5 in. × unlimited)
*4
When feeding multiple sheets:
48 mm × 54 mm - 216 mm × 356 mm (1.9 in. × 2.1 in. - 8.5 in. × 14 in.)
48 mm × 54 mm - 216 mm × 356 mm (1.9 in. × 2.1 in. - 8.5 in. × 14 in.)
Thickness
Paper: 0.04 mm – 0.5 mm (1.6 mils – 19.7 mils)
Bound documents: 4 mm (157.5 mils) (including carrier sheet)
Note: 1 mil = 0.001 in.
Bound documents: 4 mm (157.5 mils) (including carrier sheet)
Note: 1 mil = 0.001 in.
Weight
20 g/m² – 413 g/m² (5 lb. – 110 lb.)
Card
*5
Format
ISO format
Size
85.6 mm × 54 mm (3.4 in. × 2.1 in.)
Thickness
0.76 mm (30.0 mils)
Embossed card up to 1.4 mm (55.1 mils.)
Embossed card up to 1.4 mm (55.1 mils.)
Feed capacity
3 cards on the feed tray or on the mixed batch card guide
Passport
*6
Width
130 mm (5.1 in) or less
Length
188 mm (7.4 in) or less
Thickness
4.0 mm (0.15 in) or less (including carrier sheet)
Feed capacity
100 sheets (80 g/m² [21 lb.] High-quality woodfree paper)
*7
Roller replacement
*8
250,000 sheets
Scan to email address memory
capacity
capacity
20 MB in total (including the header and email message)
10
General
*1
The power requirements differ depending on the country/area. Do not use a power source that does not meet the power source
specifications marked on the unit. The power source specifications of this unit are listed on the rating name plate.
*2
If connected to a network device (hub, router, etc.) that supports IEEE802.3az.
*3
To assure continued emission limit compliance, use only shielded LAN cable. The cable should be a CAT 5 (Category 5) or higher
for 10Base-T / 100Base-TX, or CAT 5e (Enhanced Category 5) or higher for 1000Base-T.
Item
KV-S1058Y
KV-S1057C-M2/J2
KV-S1028Y
KV-S1027C-M2/J2
External dimensions
(Width x Depth x Height)
(Width x Depth x Height)
300 × 272 × 238 mm (11.8 × 10.7 × 9.4 in.)
Weight
4.0kg (8.8 lb.)
power requirement
*1
AC 100 – 127 V, 50/60 Hz, 0.8 A
AC 220 – 240 V, 50/60 Hz, 0.4 A
AC 220 – 240 V, 50/60 Hz, 0.4 A
Power
consumption
consumption
Scanning
36W or less
Ready
8W or less
Sleep
2 W or less (USB connection)
2 W or less (LAN Connection)
2 W or less (LAN Connection)
*2
Power OFF
AC 100 – 127 V: 0.3 W or less
AC 220 – 240 V: 0.5 W or less
AC 220 – 240 V: 0.5 W or less
Operating environment
Temperature: 5 - 35
o
C (41 - 95
o
F)
Humidity: 20 - 80%RH
Storage environment
Temperature: -10 - 50
o
C (14 - 122
o
F)
Humidity: 8 - 75%RH
Interface
USB3.1 Gen1 (backward compatible)
LAN (10Base-T / 100Base-TX / 1000Base-T)
*3
Recommended web browser
Internet Explorer 11; Edge
Mozilla Firefox (
Mozilla Firefox (
ver. 54 or later
)
Google Chrome (
ver. 60 or later
)
Option
Roller exchange kit (KV-SS061)
Roller cleaning paper (KV-SS03)
Carrier sheet (KV-SS077)
Roller cleaning paper (KV-SS03)
Carrier sheet (KV-SS077)
Click on the first or last page to see other KV-S1058Y / KV-S1028Y / KV-S1057C-M2 / KV-S1057C-J2 / KV-S1027C-M2 / KV-S1027C-J2 service manuals if exist.