Panasonic KV-S1058Y / KV-S1028Y / KV-S1057C-M2 / KV-S1057C-J2 / KV-S1027C-M2 / KV-S1027C-J2 Service Manual ▷ View online
29
(Flowchart)
CONTROL Board
8.5.5
STARTING SENSOR
Board
8.5.7
Feed Tray
Top Cover
Front Cover
AC Inlet Cover
Exit Tray (Assy)
Paper Tray
LCD Board
Back Cover
8.2.1
8.2.6
8.2.3
Top Front Cover
8.2.8
8.2.5
8.2.4
8.2.2
8.2.7
8.2.7
8.2.5
(112)
(204)
(114)
(101)
(103)
(104)
(436)
(412)
(440)
(626)
(437)
(446)
(410)
(413)
(608)
(612)
(629)
(625)
(603)
(623)
(429)
(526)
(523)
(509)
(539)
(522)
(533)
(530)
(519)
(301)
(205)
(201)
(102)
START
Exterior
Upper Chassis
PANEL SWITCH Board
Scanning Glass (B)
AUTO/MANUAL
DETECTION Board
ULTRASONIC SENSOR
(G) Board
PAPER SENSOR
Board
Free Roller
CIS (B)
8.3.5
8.3.4
Reference Plate (F)
8.3.6
8.3.3
8.3.2
8.3.7
DFP Roller
8.3.1
8.3.5
Scanning Glass (F)
DOOR DETECTION
Board
Side Plate Assembly
Paper Feed Roller
8.4.2
8.4.4
8.4.5
CIS (F)
8.4.2
8.4.1
Lower Chassis
Platen Motor
Power Supply
FAN
Conveyer Motor
8.5.2
Bottom Plate
8.5.1
8.5.4
8.5.3
8.5.6
Reference Plate (B)
Exit Roller
(Assy)
Conveyor Roller
(Assy)
8.4.3
8.4.7
8.4.6
30
8.2.
Exterior
8.2.1.
Feed Tray
8.2.2.
Paper Tray
8.2.3.
Exit Tray
(1) Remove the Feed Tray from the unit.
Remove the left side of the Feed Tray (arrow
1
) first as
shown in the illustration.
(1) Keep pulling the Paper Tray (arrow
1
).
(2) Push the 2 levers (arrows
2
) to unlock the 2 hooks.
(3) Remove the Feed Tray Cover (arrow
3
).
(1) Remove Exit Tray in the direction of the arrow.
Feed Tray
2
1
Lever
Feed Tray
Cover
Cover
Paper Tray
2
2
3
Hook Hole
1
Exit Tray
Hook
31
8.2.4.
Front Cover
8.2.5.
Back Cover
(1) Pull the Front Cover (2 arrows
1
) at the same time to unlock
3 hooks.
(2) Pull the Front Cover (2 arrows
2
) at the same time to unlock
3 hooks.
(3) Remove the Front Cover.
Reassembling Note:
When installing Front Cover, fix it with tape so as not to pinch FFC.
(1) Remove the Front Cover.
(See 8.2.4. Front Cover)
(2) Remove the screw C and H.
(3) Remove the AC Inlet Cover.
(4) Remove the AC Inlet from the Back Cover.
(3) Remove the AC Inlet Cover.
(4) Remove the AC Inlet from the Back Cover.
Reassembling Note:
Check the direction when installing AC Inlet.
(5) Open the ADF Door.
(6) Unlock the 2 hooks of the back side, while pulling the Back
(6) Unlock the 2 hooks of the back side, while pulling the Back
Cover (2 arrows
1
).
(7) Unlock the 4 hooks of the upper side, while expanding the
Back Cover (2 arrows
2
).
(8) Remove Back Cover (arrow
3
).
Front Cover
2
1
1
Hook
2
TAPE
FFC
FFC
FFC
TAPE
TAPE
FFC
FFC
OK
NG
AC Inlet Cover
AC Inlet
Exit Tray
C
Back Cover
H
Back Cover
ADF Door
Hook
1
1
2
3
2
32
8.2.6.
Top Cover
8.2.7.
PANEL SWITCH Board and LCD Board
8.2.8.
Top Front Cover
(1) Pull the Top Cover (2 arrows
1
) at the same time to unlock 2
hooks.
(2) Pull the Top Cover (1 arrows
2
) to unlock the center hook.
(3) Pull the Top Cover (2 arrows
3
) at the same time to unlock 2
hooks.
(4) Remove the Top Cover.
(1) Remove Top Cover.
(See 8.2.6. Top Cover)
(2) Remove the 3 screws C.
(3) Remove the PANEL SWITCH Board and LCD Board, while
(3) Remove the PANEL SWITCH Board and LCD Board, while
unlock the hooks.
(4) Disconnect the FFC cable.
(1) Remove Top Cover.
(See 8.2.6. Top Cover)
(2) Unlock 3 Hooks to remove the Top Front Cover.
Top Cover
1
3
3
1
2
:Hook
Top Cover
PANEL SWITCH Board
Hook
LCD Board
C
FFC Cable
Top Front Cover
Hook
Click on the first or last page to see other KV-S1058Y / KV-S1028Y / KV-S1057C-M2 / KV-S1057C-J2 / KV-S1027C-M2 / KV-S1027C-J2 service manuals if exist.