Panasonic KV-S1058Y / KV-S1028Y / KV-S1057C-M2 / KV-S1057C-J2 / KV-S1027C-M2 / KV-S1027C-J2 Service Manual ▷ View online
21
6 Section Views
6.1.
Motor
6.2.
Roller
Conveyor Motor
Platen Motor
DFP Roller
Paper Feed Roller
Free Roller
Free Roller
Conveyor Roller
Exit Roller
CIS (F)
CIS (B)
22
6.3.
Board and Sensor
ULTRASONIC
SENSOR (G) Board
SENSOR (G) Board
Double Feed Detector
[Generate]
[Generate]
Double Feed Detector [Receive]
LCD PANEL Board
DOOR DETECTION Board
Door Sensor
POWER Board
PAPER SENSOR Board
Paper Sensor
STARTING SENSOR Board
Starting Sensor
PANEL SWITCH Board
AUTO/MANUAL
DETECTION Board
DETECTION Board
Auto/Manual
Select Sensor
Select Sensor
CONTROL Board
(included Ultrasonic Sensor(R))
23
7 Mechanical Function
7.1.
Paper Feed Mechanism (Auto feeding Mode)
1. When the document is set on the Feed Tray, and is detected by the Paper Sensor, the scanning command from the PC will
start the Conveyor Motor, which will move down the Document Stage and open the Gate, and rotate the Paper Feed Roller,
Conveyor Roller, and Exit Roller in the direction of the arrows.
Conveyor Roller, and Exit Roller in the direction of the arrows.
2. When the document enters the separation section inside the paper feed section, the DFP Roller (supported by a shaft fixed
via a torque limiter) exerts force onto the document, which depends on the set torque.
When the paper is fed continuously, the 1st document is separated from the 2nd or more documents by this force, and is fed
to the scanning section.
If a Double Feed occurs when Double Feed detection mode has been set in the scanning software, the scanner will stop the
scanning process.
When the paper is fed continuously, the 1st document is separated from the 2nd or more documents by this force, and is fed
to the scanning section.
If a Double Feed occurs when Double Feed detection mode has been set in the scanning software, the scanner will stop the
scanning process.
3. When the leading edge of the document advances to the Conveyor Roller position, the document is fed at a speed that is 2.3
times as fast as the speed of the Paper Feed position.
4. When the leading edge of the document is detected by the Starting Sensor, scanning will start after a certain period of time
determined by the scanner.
Pickup Arm
Gate Lock Lever
Paper Sensor
Double Feed
Detector[Generate]
Detector[Generate]
Free Roller
Free Roller
CIS [B]
Reference Plate [F]
Exit Roller
CIS [F]
Starting Sensor
Control Board
Conveyor Motor
Power Supply
Conveyor Roller
Double Feed
Detector[Receive]
Detector[Receive]
Paper Feed Roller
Document Stage
Gate
DFP Roller
Paper Feed Direction
24
5. When the trailing edge of the document passes through the separation section, the continuous rotation of the Paper Feed
Roller during scanning, enables the next document to be fed.
(A difference in the rotation speeds of the Conveyor Roller and Paper Feed Roller creates a distance between the1st
document and the 2nd.)
(A difference in the rotation speeds of the Conveyor Roller and Paper Feed Roller creates a distance between the1st
document and the 2nd.)
6. The steps 2 to 5 above are repeated.
7. When the Paper Sensor detects no further documents, and the Starting Sensor detects the trailing edge of the document, the
7. When the Paper Sensor detects no further documents, and the Starting Sensor detects the trailing edge of the document, the
Conveyor Motor will stop rotating after a certain period of time determined by the scanner to end the scanning sequence.
8. After the conveyor motor stopped, by opposite rotation of the Conveyor Motor, the Document Stage is moved up and the
Gates are closed.
Note:
When the scanner’s buffer becomes full, the scanner stops to prevent buffer overflow, while allowing the data to be
transferred to the PC continuously. When enough free buffer space is secured again, the scanner resumes the
scanning process.
transferred to the PC continuously. When enough free buffer space is secured again, the scanner resumes the
scanning process.
7.2.
Paper Feed Mechanism (Manual)
Manual feed selector
DFP Release Cum
DFP Holder
1
Paper Feed Roller
DFP Roller
2
3
When scanning bound paper with the Manual Feed Selector set to "AUTO" the DFP Roller is pressed against the Paper Feed
Roller, and this results in a separating force being applied to the document, which will separate the layers, resulting in damage to
the document.
This problem can be avoided by scanning bound paper with the Manual Feed Selector set to "MANUAL".
With "MANUAL" set, the DFP Roller is released from the Paper Feed Roller and so bound paper can be fed and scanned as
if it were a single sheet of paper.
Roller, and this results in a separating force being applied to the document, which will separate the layers, resulting in damage to
the document.
This problem can be avoided by scanning bound paper with the Manual Feed Selector set to "MANUAL".
With "MANUAL" set, the DFP Roller is released from the Paper Feed Roller and so bound paper can be fed and scanned as
if it were a single sheet of paper.
Auto Mode
Manual Mode
1. The Manual feed selector is changed to Manual.
2. The DFP Release Cum pushes the DFP Holder.
3. The holder is moved up and the DFP Roller is released from the Paper Feed Roller.
2. The DFP Release Cum pushes the DFP Holder.
3. The holder is moved up and the DFP Roller is released from the Paper Feed Roller.
Note:
Do not scan bound paper with the Manual Feed Selector set to "AUTO".
When scanning bound paper, be sure the Manual Feed Selector is set to "MANUAL".
Do not scan bound paper with the Manual Feed Selector set to "AUTO".
When scanning bound paper, be sure the Manual Feed Selector is set to "MANUAL".
Click on the first or last page to see other KV-S1058Y / KV-S1028Y / KV-S1057C-M2 / KV-S1057C-J2 / KV-S1027C-M2 / KV-S1027C-J2 service manuals if exist.