DOWNLOAD Panasonic JS-950 / JS-950WS Service Manual ↓ Size: 5.85 MB | Pages: 127 in PDF or view online for FREE

iii

8.1

Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-1

8.2

Replacement Parts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-2

9.1

Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-1

9.2

Replacement Parts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-2

10.1 Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-1

10.2 Replacement Parts  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-2

10.3 Installation Instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-4

– 1-1 –

This Stingray is a POS register with use of the modular concept.

The independent presence of the main unit, display unit, storage unit, ID module unit, rear display unit, and AC cord kit

allows end users to assemble them with ease. Therefore, if a problem occurs, end users can replace the problematic unit

with new one by themselves, which results in reduction in down time and TCO. This product is a POS register with

revolutionary concept. 

A wide variety of options are available for each modular unit to achieve structures made by various users’ demands.

Display Unit: 12” resistive Touch screen, 12” capacitive Touch screen, 15” resistive Touch screen and 15” capacitive Touch

screen. (Mounting type selectable between horizontal and vertical directions for each unit)

Storage Unit: 3.5HDD, 2.5HDD and Dual CF (TBD)

ID module Unit: Magnetic strip reader, Dallas KEY Reader and Fingerprint Sensor 

Rear Display Unit: Rear Display 2line, Rear Display 4line and 2nd Display 8.4Åh resistive TP

AC cord Kit: for each country

Ingenuity in the product allows end users to perform maintenance to a certain extent, resulting in further reduction in TCO.

Operating Temperature

+5°C – +40°C

Operating Humidity

15% RH – 85% RH (no dew)

Strage Temperature

-30°C – +60°C

Strage Humidity 

10%RH – 90%RH

[ POS Workstation: JS-950WS-

ҘҘҘ ] 

Type

Intel® Celeron D

Package

LGA775

CPU

Frequency

Celeron D  352 : 3.2GHz 

Core logic 

Intel® 945G + ICH 7 

Capacity

Standard: 512MB (use 1 DIMM slot)
Maximum: 2GB 

Slot

2 DIMM slots, 240pin 

Main
memory

Type

DDR2-400/533/667 supported

Type of device

Flash Memory 

BIOS supplier 

AMI

BIOS

BIOS Function

ACPI 1.0b, APM 1.2, PXE boot, USB-FDD boot, 
USB-CD ROM/DVD ROM boot, USB Flash Memory boot 

Supported OS

Windows 2000, Windows XP (including XP Embedded) 
Windows Vista, MS-DOS 6.22 English 
- Note: Device drivers are provided.

Windows 98SE does not support.

Other Disk Drive (Option)

External USB FDD interface
External USB DVD/CD-ROM interface

Local Area Network 

Ethernet (10BASE-T/100BASE-TX) 
- Note: Wake On LAN supported. 

Expansion Slot 

1 Mini PCI BUS slot Type IIIA
(124pin Card Edge, 5.5 x 78 x 45mm)

- Note: The onboard VGA will stop working if the PCI

Express Graphic card is installed

Serial

4 ports 9pin D-SUB male are located at I/O panel.
- Note: 2 ports are Powered.

Parallel

1 port 25pin D-SUB female is located at I/O panel.
- Note: IEEE 1824 SPP/EPP/ECP modes supported 

Video

1 port 15pin D-SUB female is located at I/O panel.
- Note: The Dual Display function is Supported.

(Exclude MS-DOS) 

LAN

1 port RJ-45 is located at I/O panel.

USB 2.0 

2 standard USB ports are located at I/O panel.
2 Powered-USB ports (12Vx1, 24Vx1) are located at I/O panel.
1 USB port is located at front.

Audio

1 port of Line-out is located at I/O panel.
1 port of MIC-in is located at I/O panel.

I/O ports

Cash Drawer

1 port 6pin DIN connector is located at I/O panel.
1 port 6pin modular is located at I/O panel

Switch

1 Power Switch (power on / off)
- Note: Power on/off by pushing a short period. 

LED

1 Power status is located at front panel. (2 colors: green, red) 

 Green ON: operating state
 Red ON: power off state

1 HDD status is located at front panel. (green)

 Light on access 

1 LAN status is located at front panel. (green)

 Light on Send/Receive

– 1-2 –

– 1-3 –

Power Supply input 

AC100V-240V, 50/60 Hz, 6.0A

Size

Approx. W250mm x D282mm x H351mm

Mass

Approx. 7.0 kg

1: Power supply cord is not attached.

Please use the AC code kit along the safety standard in the country that sets it up.