Panasonic NV-GS6EE / NV-GS6GC / NV-GS17E / NV-GS17EB / NV-GS17EG / NV-GS17EP / NV-GS18E / NV-GS21E / NV-GS21EB / NV-GS21EG / NV-GS21EK / NV-GS21EP / NV-GS25GC / NV-GS25GCD / NV-GS25GN / NV-GS28GK / NV-GS35E / NV-GS35EB / NV-GS35EG / NV-GS35EP / NV-GS35GC / NV-GS35G Service Manual ▷ View online
9.3.3. PREPARATION
1. Insert a flat headed (-) screwdriver or similar object, remove
the EVR Cover.
2. Connect the Connection Adaptor and the 2 EVR Connector
Boards. Then, connect the 30 pin Flat Cables to P101 and
P102 on the Interface Board.
P102 on the Interface Board.
Fig. E1-1
Note:
When connecting them, pay attention to the direction of
them.
them.
3. Connect them to the Connector B2 on the Main C.B.A.
Fig. E1-2
4. Connect the AC Adaptor to the camcorder.
5. Connect the DC Output Cable (and AC Adaptor) to the J101
on the Measuring Board.
6. Connect the J102 on the Measuring Board to RS232C of
the PC with 232C (M3) I/F Cable.
7. Set the SW101 (RS232C_SEL) on the Measuring Board to
"M3."
8. Set the SW102 (FLUSH1) on the Measuring Board to
"NORMAL."
9. Set the SW103 (VTR_TEST) on the Measuring Board to
"L."
10. Set the SW104 (BST_TEST) on the Measuring Board to
"NORMAL."
11. Set the SW105 on the Measuring Board to "L."
12. Set the SW106 on the Measuring Board to "ON."
13. Set the SW107 on the Measuring Board to center.
14. Set the SW108 on the Measuring Board to "L."
15. Set the SW109 (FLUSH2) on the Measuring Board to
"FLUSH."
16. Power on the set.
61
NV-GS6EE NV-GS6GC
Fig. E1-3
62
NV-GS6EE NV-GS6GC
9.3.4. TP Board Location
Fig. E1-4
63
NV-GS6EE NV-GS6GC
9.3.5. SET UP OF PC-EVR ADJUSTMENT
PROGRAM
1. Turn on the PC and install the PC-EVR Adjustment
Program into the PC.
2. Execute the "kdv2005.exe" file by double clicking to start up
the PC-EVR Adjustment Program.
The main menu will be displayed.
3. Select the desired model.
4. Turn on the camcorder. Then click "Start."
Fig. E2-1
5. When the communication is complete, the dialog will
appear.
Then, click "Yes," and "Save" to save the EEPROM data.
Fig. E2-2
6. When saving for EEPROM data is complete, the menu will
appear.
To perform each adjustment, display the adjustment menu
by selecting the desired menu from "Camera Adjust,"
"Video Adjust," "LCD Adjust" or "EVF Adjust" and select
each adjustment item.
by selecting the desired menu from "Camera Adjust,"
"Video Adjust," "LCD Adjust" or "EVF Adjust" and select
each adjustment item.
Fig. E2-3
Note:
The adjusted data is stored in the EEPROM IC after
each adjustment.
each adjustment.
7. After adjustment, to close the software, select "Exit" in the
File menu or close the window.
Fig. E2-4
64
NV-GS6EE NV-GS6GC
Click on the first or last page to see other NV-GS6EE / NV-GS6GC / NV-GS17E / NV-GS17EB / NV-GS17EG / NV-GS17EP / NV-GS18E / NV-GS21E / NV-GS21EB / NV-GS21EG / NV-GS21EK / NV-GS21EP / NV-GS25GC / NV-GS25GCD / NV-GS25GN / NV-GS28GK / NV-GS35E / NV-GS35EB / NV-GS35EG / NV-GS35EP / NV-GS35GC / NV-GS35G service manuals if exist.