Panasonic UF-885 / UF-895 (serv.man2) Service Manual ▷ View online
26
(22) 1 Screw (19) and remove the Ground Strap (540).
(23) Disconnect Connector CN11 on the FCB PC Board.
(24) Remove the Harness from the clamp.
(25) Remove the Control Panel Unit.
(23) Disconnect Connector CN11 on the FCB PC Board.
(24) Remove the Harness from the clamp.
(25) Remove the Control Panel Unit.
(26) Remove the Battery Holder (1114) Assembly.
(27) Release 4 Latch Hooks.
(28) Remove the Control Panel Chassis (216).
(27) Release 4 Latch Hooks.
(28) Remove the Control Panel Chassis (216).
(29) Disconnect Connector CN41 on the PNL PC Board.
(30) 15 Screws (7B).
(31) Release two Latch Hooks.
(32) Remove the PNL PC Board (214).
(31) Release two Latch Hooks.
(32) Remove the PNL PC Board (214).
(25)
(24)
(23)
(22)
(27)
(28)
(26)
(29)
(30)x15
(32)
(31)
27
(33) Release Latch Hook.
(34) Carefully lift the LCD Unit (215).
(34) Carefully lift the LCD Unit (215).
(35) Disconnect Connector CN42 on the PNL PC Board.
(36) Remove the LCD Unit (215).
(36) Remove the LCD Unit (215).
(37) Release 4 Latch Hooks on the back of the LCD Holder.
(38) Remove the LCD Holder (232).
(38) Remove the LCD Holder (232).
Cleaning ADF Roller (323), Pre-Feed Roller (325), Feed
Roller (328), Eject Roller (330) and the Scanner Glass (341)
(1) Open the Control Panel Unit.
(2) Clean the ADF Roller (323), Pre-Feed Roller (325),
Feed Roller (328), Eject Roller (330) and the Scanner Glass
(341) with a soft cloth, soaked with isopropyl alcohol.
Roller (328), Eject Roller (330) and the Scanner Glass (341)
(1) Open the Control Panel Unit.
(2) Clean the ADF Roller (323), Pre-Feed Roller (325),
Feed Roller (328), Eject Roller (330) and the Scanner Glass
(341) with a soft cloth, soaked with isopropyl alcohol.
(33)
(34)
(36)
(35)
(37)
(38)
28
2.6
Transmitter Chassis (301), Scanner Assembly (340),
LED Array Assembly (333), Verification Stamp Assembly
LED Array Assembly (333), Verification Stamp Assembly
(1) Remove the Front Cover (105), Rear Cover (108) (Refer
to 2.3) and the Control Panel Unit (Refer to 2.5).
(2) Remove all the harnesses from the clamps.
(3) Disconnect Connector CN8 on the FCB PC Board.
(4) 1 Screw and remove the Front Bracket 2 (136).
(5) 4 Screws (19).
(6) Remove the Transmitter Chassis (301) Assembly.
(3) Disconnect Connector CN8 on the FCB PC Board.
(4) 1 Screw and remove the Front Bracket 2 (136).
(5) 4 Screws (19).
(6) Remove the Transmitter Chassis (301) Assembly.
(7) Disconnect Connector CN30 on the CCD PC Board.
(8) 2 Screws (19).
(9) Remove the Scanner Assembly (340).
(8) 2 Screws (19).
(9) Remove the Scanner Assembly (340).
Note: When reinstalling the CCD Harness,
1. Separate the CCD Harness (545) from the other
harnesses.
2. Place the other harnesses into the Harness Protector Film
(556).
Cleaning Mirror 1 (337), Mirror 2 (338)
Clean the Mirror 1 (337) and Mirror 2 (338) with a soft cloth,
soaked with isoproyl alcohol.
Clean the Mirror 1 (337) and Mirror 2 (338) with a soft cloth,
soaked with isoproyl alcohol.
(2)
(2)
(4)
(5)
(5)
(5)
(6)
(7)
(8)
(9)
(1)
(2)
(1)
(2)
Mirror 1
Mirror 2
29
(10) 6 Screws (19).
(11) Remove the LED Array Bracket 1 (332) and LED Array
Bracket 2 (351).
(12) 8 Screws (9H).
(13) Remove two LED Array Assemblies (333).
(13) Remove two LED Array Assemblies (333).
Note:
UF-885 has only one LED Array Assembly.
(14) 1 Screw (19).
(15) Remove the Stamp Holder (334) and Stamp Solenoid
(15) Remove the Stamp Holder (334) and Stamp Solenoid
(335).
(10)x6
(11)
(12)
(13)
(14)
(15)
Click on the first or last page to see other UF-885 / UF-895 (serv.man2) service manuals if exist.