Panasonic KX-FLB813RU Service Manual ▷ View online
113
KX-FLB813RU
OK means “can set”.
NG means “can not set”.
Note:
NG means “can not set”.
Note:
Refer to SERVICE FUNCTION TABLE (P.99) for descriptions of the individual codes.
Example:
If you want to set value in the “401 PRINT CONFIRMATION REPORT”, press the dial key number 1, 2 or 3 corresponding to the
Set Value you want to select. (1:ERROR/2:ON/3:OFF)
Set Value you want to select. (1:ERROR/2:ON/3:OFF)
12.3. TROUBLESHOOTING DETAILS
12.3.1. OUTLINE
Troubleshooting is for recovering quality and reliability by determining the broken component and replacing, adjusting or cleaning it
as required. First, determine the problem then decide the troubleshooting method. If you have difficulty finding the broken part,
determine which board is broken. (For example: the Digital PCB, Analog PCB, etc.) The claim tag from a customer or dealer may
use different expressions for the same problem, as they are not a technician or engineer. Using your experience, test the problem
area corresponding to the claim. Also, returns from a customer or dealer often have a claim tag. For these cases as well, you need
to determine the problem. Test the unit using the simple check list on SIMPLE CHECK LIST(P.116). Difficult problems may be hard
to determine, so repeated testing is necessary.
as required. First, determine the problem then decide the troubleshooting method. If you have difficulty finding the broken part,
determine which board is broken. (For example: the Digital PCB, Analog PCB, etc.) The claim tag from a customer or dealer may
use different expressions for the same problem, as they are not a technician or engineer. Using your experience, test the problem
area corresponding to the claim. Also, returns from a customer or dealer often have a claim tag. For these cases as well, you need
to determine the problem. Test the unit using the simple check list on SIMPLE CHECK LIST(P.116). Difficult problems may be hard
to determine, so repeated testing is necessary.
946
Fake RBT
1:ON / 2:OFF
OFF
OK
947
Fake BELL/RBT TIMEOUT time
1~60
30
OK
948
Repeat interval
1~255
×10ms
20
×10ms
OK
991
Setup list
1:Start
---------
OK
994
Journal list
1:Start
---------
OK
995
Journal 2 list
1:Start
---------
OK
996
Journal 3 list
1:Start
---------
OK
998
History list
1:Start
---------
OK
999
Service list
1:Start
---------
OK
Code
Function
Set Value
Default
Remote Setting
114
KX-FLB813RU
12.3.2. STARTING TROUBLE SHOOTING
Determine the symptom and the troubleshooting method.
CROSS REFERENCE:
USER RECOVERABLE ERRORS(P.107)
SIMPLE CHECK LIST(P.116)
DIGITAL BOARD SECTION(P.253)
POWER SUPPLY BOARD SECTION(P.70)
SIMPLE CHECK LIST(P.116)
DIGITAL BOARD SECTION(P.253)
POWER SUPPLY BOARD SECTION(P.70)
115
KX-FLB813RU
12.3.3. INITIALIZATION
There are two types of initialization, one is the short initialization (about 3 seconds) and the other is the long initialization (about
10 seconds). The short initialization makes the unit enter the standby mode. The long initialization makes the unit enter the
standby mode after cleaning or detecting the rest of toner.
10 seconds). The short initialization makes the unit enter the standby mode. The long initialization makes the unit enter the
standby mode after cleaning or detecting the rest of toner.
116
KX-FLB813RU
12.3.4. SIMPLE CHECK LIST
Note:
Check according to the service code referring to TEST FUNCTIONS (P.94)
Click on the first or last page to see other KX-FLB813RU service manuals if exist.