Panasonic KX-FLB813RU Service Manual ▷ View online
ORDER NO. KMF0606989CE
F7
Flat-bed Multi-Function Laser Fax
KX-FLB813RU
(for Russia)
2
KX-FLB813RU
TABLE OF CONTENTS
PAGE
PAGE
1 Safety Precaution -------------------------------------------------4
1.1. FOR SERVICE TECHNICIANS ------------------------4
1.2. AC CAUTION -----------------------------------------------4
1.3. PERSONAL SAFETY PRECAUTIONS --------------5
1.4. SERVICE PRECAUTIONS ------------------------------5
1.2. AC CAUTION -----------------------------------------------4
1.3. PERSONAL SAFETY PRECAUTIONS --------------5
1.4. SERVICE PRECAUTIONS ------------------------------5
2 Warning --------------------------------------------------------------6
2.1. ABOUT LEAD FREE SOLDER (PbF: Pb free) -----6
2.2. INSULATION RESISTANCE TEST--------------------7
2.3. BATTERY CAUTION --------------------------------------7
2.2. INSULATION RESISTANCE TEST--------------------7
2.3. BATTERY CAUTION --------------------------------------7
3 Specifications ------------------------------------------------------8
4 General/Introduction ---------------------------------------------9
4 General/Introduction ---------------------------------------------9
4.1. Optional Accessories--------------------------------------9
4.2. Translation Lists --------------------------------------------9
4.2. Translation Lists --------------------------------------------9
5 Features ------------------------------------------------------------ 12
5.1. General Features----------------------------------------- 12
5.2. HARDWARE REQUIREMENTS FOR MULTI-
5.2. HARDWARE REQUIREMENTS FOR MULTI-
FUNCTION SOFTWARE------------------------------- 12
6 Technical Descriptions---------------------------------------- 13
6.1. CONNECTION DIAGRAM ----------------------------- 13
6.2. GENERAL BLOCK DIAGRAM------------------------ 14
6.3. FACSIMILE SECTION ---------------------------------- 16
6.4. MODEM SECTION -------------------------------------- 28
6.5. NCU SECTION ------------------------------------------- 34
6.6. ITS (Integrated telephone System) and
6.2. GENERAL BLOCK DIAGRAM------------------------ 14
6.3. FACSIMILE SECTION ---------------------------------- 16
6.4. MODEM SECTION -------------------------------------- 28
6.5. NCU SECTION ------------------------------------------- 34
6.6. ITS (Integrated telephone System) and
MONITOR SECTION------------------------------------ 35
6.7. CIS CONTROL SECTION ----------------------------- 37
6.8. MOTOR DRIVE SECTION----------------------------- 38
6.9. DRIVE MODE AND WAVEFORM OF ADF
6.8. MOTOR DRIVE SECTION----------------------------- 38
6.9. DRIVE MODE AND WAVEFORM OF ADF
AND FB MOTOR ----------------------------------------- 45
6.10. FAN MOTOR SECTION -------------------------------- 47
6.11. SOLENOID DRIVE SECTION ------------------------ 49
6.12. LSU (Laser Scanning Unit) SECTION -------------- 50
6.13. SENSORS AND SWITCHES SECTION ----------- 52
6.14. OPERATION BOARD SECTION--------------------- 61
6.15. LCD SECTION-------------------------------------------- 62
6.16. HVPS (High Voltage Power Supply)
6.13. SENSORS AND SWITCHES SECTION ----------- 52
6.14. OPERATION BOARD SECTION--------------------- 61
6.15. LCD SECTION-------------------------------------------- 62
6.16. HVPS (High Voltage Power Supply)
SECTION--------------------------------------------------- 63
6.17. HEAT LAMP CONTROL CIRCUIT------------------- 65
6.18. POWER SUPPLY BOARD SECTION -------------- 70
6.19. Mechanical Operation----------------------------------- 71
6.18. POWER SUPPLY BOARD SECTION -------------- 70
6.19. Mechanical Operation----------------------------------- 71
7 Location of Controls and Components------------------ 73
7.1. OVERVIEW------------------------------------------------ 73
7.2. CONTROL PANEL--------------------------------------- 74
7.2. CONTROL PANEL--------------------------------------- 74
8 Installation Instructions--------------------------------------- 75
8.1. INSTALLATION ------------------------------------------- 75
8.2. CONNECTIONS------------------------------------------ 89
8.2. CONNECTIONS------------------------------------------ 89
9 Operation Instructions ---------------------------------------- 92
9.1. YOUR LOGO--------------------------------------------- 92
10 Test Mode---------------------------------------------------------- 94
10.1. TEST FUNCTIONS -------------------------------------- 94
11 Service Mode ----------------------------------------------------- 98
11.1. PROGRAMMING AND LISTS ------------------------ 98
11.2. USER MODE (The list below is an example of
11.2. USER MODE (The list below is an example of
the SYSTEM SETUP LIST the unit prints out.) - 102
11.3. SERVICE MODE SETTINGS (Example of a
printed out list) ------------------------------------------ 103
11.4. HISTORY------------------------------------------------- 104
12 Troubleshooting Guide-------------------------------------- 107
12.1. USER RECOVERABLE ERRORS -----------------107
12.2. REMOTE PROGRAMMING -------------------------109
12.3. TROUBLESHOOTING DETAILS ------------------- 113
12.4. DOCUMENT JAMS (AUTO DOCUMENT
12.2. REMOTE PROGRAMMING -------------------------109
12.3. TROUBLESHOOTING DETAILS ------------------- 113
12.4. DOCUMENT JAMS (AUTO DOCUMENT
FEEDER) -------------------------------------------------192
12.5. RECORDING PAPER JAM --------------------------194
13 Service Fixture & Tools--------------------------------------199
14 Disassembly and Assembly Instructions -------------200
14 Disassembly and Assembly Instructions -------------200
14.1. LOWER CABINET SECTION -----------------------201
14.2. PRINTER COVER SECTION -----------------------202
14.3. SORTER SECTION------------------------------------203
14.4. REMOVE THE BOTH SIDE CABINET
14.2. PRINTER COVER SECTION -----------------------202
14.3. SORTER SECTION------------------------------------203
14.4. REMOVE THE BOTH SIDE CABINET
SECTION -------------------------------------------------204
14.5. REMOVE THE LEFT SIDE CABINET
SECTION -------------------------------------------------205
14.6. REMOVE THE BOTTOM PLATE-------------------206
14.7. REMOVE THE RIGHT SIDE CABINET
14.7. REMOVE THE RIGHT SIDE CABINET
SECTION -------------------------------------------------207
14.8. REMOVE THE ALALOG BOARD ------------------208
14.9. REMOVE THE DIGITAL BOARD-------------------209
14.9. REMOVE THE DIGITAL BOARD-------------------209
14.10. REMOVE THE MIRROR------------------------------210
14.11. REMOVE THE HIGH VOLTAGE POWER
BOARD---------------------------------------------------- 211
14.12. REMOVE THE LASER UNIT ------------------------212
14.13. REMOVE THE PICK UP ROLLER ---------------213
14.14. REMOVE THE FUSER UNIT AND THE
14.13. REMOVE THE PICK UP ROLLER ---------------213
14.14. REMOVE THE FUSER UNIT AND THE
SORTER UNIT ------------------------------------------214
14.15. REMOVE THE FUSER UNIT PARTS -------------215
14.16. REMOVE THE RIGHT SIDE CABINET
14.16. REMOVE THE RIGHT SIDE CABINET
SECTION -------------------------------------------------216
14.17. REMOVE THE OPERATION PANEL AND
BOARD----------------------------------------------------217
14.18. REMOVE THE SCANNER GLASS COVER-----218
14.19. REMOVE THE SCANNER SECTION ------------219
14.20. REMOVE THE MULTI ROLLER -------------------220
14.21. REMOVE THE TRANSFER ROLLER UNIT ----221
14.22. REMOVE THE EJECT SUPPORT ROLLER
14.19. REMOVE THE SCANNER SECTION ------------219
14.20. REMOVE THE MULTI ROLLER -------------------220
14.21. REMOVE THE TRANSFER ROLLER UNIT ----221
14.22. REMOVE THE EJECT SUPPORT ROLLER
GUIDE HOLDER --------------------------------------- 222
14.23. REMOVE THE MAIN GEAR UNIT -----------------223
14.24. REMOVE THE ADF TOP COVER -----------------224
14.25. REMOVE THE ADF UNIT----------------------------226
14.26. REMOVE THE ADF PARTS -------------------------227
14.27. REMOVE THE SORTER UNIT PARTS-----------228
14.28. INSTALLATION POSITION OF THE LEAD------230
14.29. HOW TO INSTALL FERRITE CORE -------------- 235
14.24. REMOVE THE ADF TOP COVER -----------------224
14.25. REMOVE THE ADF UNIT----------------------------226
14.26. REMOVE THE ADF PARTS -------------------------227
14.27. REMOVE THE SORTER UNIT PARTS-----------228
14.28. INSTALLATION POSITION OF THE LEAD------230
14.29. HOW TO INSTALL FERRITE CORE -------------- 235
15 Maintenace-------------------------------------------------------236
15.1. MAINTENANCE ITEMS AND COMPONENT
LOCATIONS ---------------------------------------------236
15.2. MAINTENANCE-----------------------------------------238
15.3. PRINTING OPERATION PRINCIPLE -------------244
15.4. TERMINAL GUIDE OF THE ICs
15.3. PRINTING OPERATION PRINCIPLE -------------244
15.4. TERMINAL GUIDE OF THE ICs
TRANSISTORS AND DIODES----------------------249
15.5. HOW TO REPLACE A FLAT PACKAGE IC -----252
15.6. DIGITAL BOARD SECTION -------------------------253
15.7. TEST CHART--------------------------------------------255
15.6. DIGITAL BOARD SECTION -------------------------253
15.7. TEST CHART--------------------------------------------255
16 Schematic Diagram -------------------------------------------257
16.1. DIGITAL BOARD (1) -----------------------------------257
16.2. DIGITAL BOARD (2) -----------------------------------259
16.2. DIGITAL BOARD (2) -----------------------------------259
3
KX-FLB813RU
16.3. DIGITAL BOARD (3)----------------------------------- 260
16.4. ANALOG BOARD -------------------------------------- 262
16.5. TEL JACK BOARD------------------------------------- 264
16.6. TONER SENSOR BOARD--------------------------- 264
16.7. HANDSET RELAY BOARD -------------------------- 264
16.8. VARISTOR BOARD------------------------------------ 264
16.9. OPERATION BOARD --------------------------------- 265
16.4. ANALOG BOARD -------------------------------------- 262
16.5. TEL JACK BOARD------------------------------------- 264
16.6. TONER SENSOR BOARD--------------------------- 264
16.7. HANDSET RELAY BOARD -------------------------- 264
16.8. VARISTOR BOARD------------------------------------ 264
16.9. OPERATION BOARD --------------------------------- 265
16.10. FLATBED BOARD ------------------------------------- 266
16.11. SENSOR BOARD -------------------------------------- 267
16.12. HANDSET BOARD (OPTION) ---------------------- 268
16.13. HIGH VOLTAGE POWER SUPPLY BOARD ---- 269
16.14. LOW VOLTAGE POWER SUPPLY BOARD----- 270
16.13. HIGH VOLTAGE POWER SUPPLY BOARD ---- 269
16.14. LOW VOLTAGE POWER SUPPLY BOARD----- 270
17 Printed Circuit Board----------------------------------------- 271
17.1. DIGITAL BOARD --------------------------------------- 271
17.2. ANALOG BOARD -------------------------------------- 273
17.3. TEL JACK BOARD------------------------------------- 275
17.4. TONER SENSOR BOARD--------------------------- 275
17.5. HANDSET RELAY BOARD -------------------------- 275
17.6. VARISTOR BOARD------------------------------------ 275
17.7. OPERATION BOARD --------------------------------- 276
17.8. SCANNER I/F BOARD-------------------------------- 278
17.9. SENSOR BOARD -------------------------------------- 280
17.2. ANALOG BOARD -------------------------------------- 273
17.3. TEL JACK BOARD------------------------------------- 275
17.4. TONER SENSOR BOARD--------------------------- 275
17.5. HANDSET RELAY BOARD -------------------------- 275
17.6. VARISTOR BOARD------------------------------------ 275
17.7. OPERATION BOARD --------------------------------- 276
17.8. SCANNER I/F BOARD-------------------------------- 278
17.9. SENSOR BOARD -------------------------------------- 280
17.10. HANDSET BOARD ------------------------------------ 281
17.11. HIGH VOLTAGE POWER SUPPLY BOARD ---- 282
17.12. LOW VOLTAGE POWER SUPPLY BOARD----- 283
18 Appendix Information of Schematic Diagram ------- 284
19 Exploded View and Replacement Parts List --------- 285
19 Exploded View and Replacement Parts List --------- 285
19.1. CABINET, MECHANICAL AND ELECTRICAL
PARTS LOCATION------------------------------------- 285
19.2. REPLACEMENT PARTS LIST ---------------------- 305
4
KX-FLB813RU
1 Safety Precaution
1. Before servicing, unplug the AC power cord to prevent an electric shock.
2. When replacing parts, use only the manufacturer's recommended components.
3. Check the condition of the power cord. Replace if wear or damage is evident.
4. After servicing, be sure to restore the lead dress, insulation barriers, insulation papers, shields, etc.
5. Before returning the serviced equipment to the customer, be sure to perform the following insulation resistance test to prevent
2. When replacing parts, use only the manufacturer's recommended components.
3. Check the condition of the power cord. Replace if wear or damage is evident.
4. After servicing, be sure to restore the lead dress, insulation barriers, insulation papers, shields, etc.
5. Before returning the serviced equipment to the customer, be sure to perform the following insulation resistance test to prevent
the customer from being exposed to shock hazards.
1.1.
FOR SERVICE TECHNICIANS
ICs and LSIs are vulnerable to static electricity.
When repairing, the following precautions will help prevent recurring malfunctions.
When repairing, the following precautions will help prevent recurring malfunctions.
1. Cover the plastic part's boxes with aluminum foil.
2. Ground the soldering irons.
3. Use a conductive mat on the worktable.
4. Do not touch the IC or LSI pins with bare fingers.
2. Ground the soldering irons.
3. Use a conductive mat on the worktable.
4. Do not touch the IC or LSI pins with bare fingers.
1.2.
AC CAUTION
For safety, before closing the lower cabinet, please make sure of the following precautions.
1. The earth lead is fixed with the screw.
2. The AC connector is connected properly.
2. The AC connector is connected properly.
