Panasonic KX-FL513RU Service Manual ▷ View online
2.2. SPECIFICATIONS
Applicable Lines:
Public Switched Telephone Network
Document Size:
Max. 216 mm (8 1/2”) in width
Max. 600 mm (23 5/8”) in length
Effective Scanning Width:
208 mm (8 3/16”)
Effective Printing Width:
A4 : 202mm
Transmission Time*:
Approx. 8 s/page (ECM-MMR Memory transmission)**
Scanning Density:
Horizontal:
8 pels/mm (203 pels/inch)
Vertical:
3.85 lines/mm (98 lines/inch)-STANDARD
7.7 lines/mm (196 lines/inch)-FINE/PHOTO/PHOTO WITH TEXT
15.4 lines/mm (392 lines/inch)-SUPER FINE
Halftone Level:
64-level
Scanner Type:
Contact Image Sensor (CIS)
Printer Type:
Laser printer
Data Compression System:
Modified Huffman (MH), Modified READ (MR), Modified, Modified READ (MMR)
Modem Speed:
14,400/12,000/9,600/7,200/4,800/2,400 bps; Automatic Fallback
Operating Environment:
10°C—32.5°C (50°F—90.5°F), 20—80% RH (Relative Humidity)
Dimensions (H×W×D):
220 mm × 430 mm × 360 mm (8 21/32”×16 15/16”×14 5/32”)
Mass (Weight):
Approx. 9 kg (19.8 lb.)
Power Consumption:
Standby: Approx. 4 W
Transmission: Approx. 12W
Reception: Approx. 290 W
Copy: Approx. 290 W
Maximum: Approx. 950W (When the fuser lamp turns on)
Power Supply:
220-240 V AC, 50/60Hz
Memory Capacity:
Approx. 120 pages of memory transmission.
Approx. 170 pages of memory reception.
(Based on ITU-T No. 1 Test Chart in standard resolution.)
Laser diode properties:
Laser output: Max. 5 mW
Wave length: 760 nm—800 nm
Emission duration: Continuous
Print Speed:
12 ppm (page per minute)
Printing Resolution:
600 × 600 dpi
* Transmission speed depends upon the contents of the pages, resolution, telephone line conditions and capability of the other
party’s machine.
party’s machine.
** Transmission speed is based upon the ITU-T No. 1 Test Chart and original mode. (Refer to ITU-T No.1 TEST CHART(P.217).)
If the capability of the other party´s machine is inferior to your unit, the transmission time may be longer.
If the capability of the other party´s machine is inferior to your unit, the transmission time may be longer.
Note:
•
•
•
•
Any details given in these instructions are subject to change without notice.
•
•
•
•
The pictures and illustrations in these instructions may vary slightly from the actual product.
Design and specifications are subject to change without notice.
2.3. OPTIONAL ACCESSORIES
Model No.
Description
Specifications
KX-FA83A or KX-FA83E Toner cartridge
1 toner cartridge
KX-FA84A or KX-FA84E Drum unit
1 drum unit
13
KX-FL513RU
3 INSTALLATION
3.1. LOCATION OF CONTROLS
3.1.1. OVERVIEW
Note:
*The paper stacker and document stacker may not be shown in all illustrations.
14
KX-FL513RU
3.1.2. CONTROL PANEL
15
KX-FL513RU
3.2. CONNECTIONS
(1) Connect the handset cord.
(2) Connect the telephone line cord.
(3) Connect the power cord.
•
•
•
•
When the power is turned on for the first time, the unit will print some basic information.
Caution:
•
•
•
•
When you operate this product, the power outlet should be near the product and easily accessible.
•
•
•
•
Be sure to use the telephone line cord included in this unit..
•
•
•
•
Do not extend the telephone line cord.
Note:
•
•
•
•
The warranty does not cover damage due to power line surges or lightning. For additional equipment protection, we
recommend the use of a surge protector. The following types are available: TELESPIKE BLOK MODEL TSB (TRIPPE MFG.
CO.), SPIKE BLOK MODEL SK6-0 (TRIPPE MFG. CO.), SUPER MAX (PANAMAX) or MP1 (ITW LINX).
recommend the use of a surge protector. The following types are available: TELESPIKE BLOK MODEL TSB (TRIPPE MFG.
CO.), SPIKE BLOK MODEL SK6-0 (TRIPPE MFG. CO.), SUPER MAX (PANAMAX) or MP1 (ITW LINX).
•
•
•
•
To avoid malfunction, do not position fax machine near appliances such as TVs or speakers which generate an intense
magnetic field.
magnetic field.
•
•
•
•
If any other device is connected on the same line, this unit may disturb the network condition of the device.
16
KX-FL513RU
Click on the first or last page to see other KX-FL513RU service manuals if exist.