Panasonic DX-600 / DX-800 Service Manual ▷ View online
25
DX-600/800
APR 2002
Edition 1.0
2.2.4.
Transmit Guide (301) Assembly, Scanning Glass (308)
(1) Remove the Left Cover (103), Right Cover
(102), and Front Cover (104) (Refer to 2.2.2.).
(2) Remove the Control Panel Unit
(Refer to 2.2.3.).
(3) Release the Harnesses from the clamps.
(4) Remove 4 Screws (19).
(5) Disconnect 4 Connectors (CN1, 3, 5 and 7) on
(4) Remove 4 Screws (19).
(5) Disconnect 4 Connectors (CN1, 3, 5 and 7) on
the SC PC Board.
(6) Remove the Transmit Guide (301) Assembly.
(7) Carefully release the Latch Hook using a
Blade-tip Screwdriver.
(8) Remove the Scanning Glass (308).
<Cleaning the Scanning Glass>
(1) Open the Control Panel Unit.
(2) Clean the Scanning Glass (308) with a soft
(2) Clean the Scanning Glass (308) with a soft
cloth, soaked with isopropyl alcohol.
<Cleaning the Feed Roller, Eject Roller, ADF
Roller>
Roller>
(1) Open the Control Panel Unit.
(2) Clean the Feed Roller (302), Eject Roller (303)
(2) Clean the Feed Roller (302), Eject Roller (303)
and ADF Roller (331) with a soft cloth,
soaked with isopropyl alcohol.
soaked with isopropyl alcohol.
(4)x4
(6)
(5)
(3)
(7)
(8)
(1)
(2)
(1)
(2)
(2)
(2)
26
DX-600/800
APR 2002
Edition 1.0
2.2.5.
Stamp Assembly, Stamp Solenoid (327)
(1) Remove the Transmit Guide (301) Assembly
(Refer to 2.2.4.).
(2) Remove the Stamp Assembly (325, 326).
(3) Remove 1 Screw (19).
(4) Remove the Stamp Solenoid (327).
(4) Remove the Stamp Solenoid (327).
(2)
(3)
(4)
27
DX-600/800
APR 2002
Edition 1.0
2.2.6.
Eject Roller (303)
(1) Remove the Transmit Guide (301) Assembly
(Refer to 2.2.4.).
(2) Remove the Stamp Assembly (325, 326)
(Refer to 2.2.5.).
(3) Release 2 Latch Hooks.
(4) Remove the Ground Plate (317).
(4) Remove the Ground Plate (317).
(5) Release the Latch Hook by using a small Blade-
tip Screwdriver.
(6) Remove 2 D25F Drive Gears (332).
(7) Remove D17 Gear (313) and D50 Gear (314).
(7) Remove D17 Gear (313) and D50 Gear (314).
(8) Remove 2 P6C Bushings (342).
(9) Remove the Roller Wire Spring (343).
(9) Remove the Roller Wire Spring (343).
Caution:
Reinstall the Roller Wire Spring (343) as
illustrated.
illustrated.
(3)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Roller Spring
28
DX-600/800
APR 2002
Edition 1.0
(10) Remove 2 P6A Bushings (316).
(11) Remove the Eject Roller (303).
(10)
(11)
Click on the first or last page to see other DX-600 / DX-800 service manuals if exist.