Panasonic DX-600 / DX-800 Service Manual ▷ View online
21
DX-600/800
APR 2002
Edition 1.0
2.2.
Disassembly Instructions
2.2.1.
Power Cord (1108), Telephone Line Cable (1109), LAN Cable, Recording
Paper Tray Assembly (1107), Paper Cassette
Paper Tray Assembly (1107), Paper Cassette
(1) Disconnect the Power Cord (1108).
(2) Disconnect the Telephone Line Cable (1109).
(3) Disconnect the LAN Cable.
(2) Disconnect the Telephone Line Cable (1109).
(3) Disconnect the LAN Cable.
(4) Remove the Recording Paper Tray Assembly
(1107).
(5) Remove the Paper Cassette.
(1)
(2)
(3)
(4)
(5)
22
DX-600/800
APR 2002
Edition 1.0
2.2.2.
Left Cover (103), Right Cover (102), Front Cover (104), Speaker (117), Separation
Rubber (207)
Rubber (207)
(1) Open the Printer Cover (106).
(2) Open the Control Panel Unit.
(3) Remove 3 Silver Screws (B1).
(2) Open the Control Panel Unit.
(3) Remove 3 Silver Screws (B1).
(4) Remove the Left Cover (103).
(5) Disconnect Connector CN9 on the SC PC
(5) Disconnect Connector CN9 on the SC PC
Board (1001).
(6) Remove 2 Screws (C2) and 1 Screw (1Y).
(7) Remove the Speaker (117).
(7) Remove the Speaker (117).
(8) Remove 2 Silver Screws (B1).
(9) Remove the SNT Cover (131).
(9) Remove the SNT Cover (131).
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
23
DX-600/800
APR 2002
Edition 1.0
(10) Remove 2 Silver Screws (B1).
(11) Remove the Right Cover (102).
(12) Release 3 Latch Hooks.
(13) Remove the Front Cover (104).
(13) Remove the Front Cover (104).
<Replacing & Cleaning the Separation Rubber>
(1) Open the Control Panel Unit.
(2) Open the Printer Cover (106).
(3) Remove the Separation Rubber Holder Assy
(2) Open the Printer Cover (106).
(3) Remove the Separation Rubber Holder Assy
(202).
(4) Clean the Separation Rubber (207) with a soft
cloth, saturated with isopropyl alcohol or replace
with a new one.
with a new one.
(10)
(11)
(12)
(13)
(4)
24
DX-600/800
APR 2002
Edition 1.0
2.2.3.
Control Panel Unit, PNL1 PC Board (1004)
(1) Open the Printer Cover (106)
(2) Slightly open the Control Panel Unit.
(2) Slightly open the Control Panel Unit.
(3) Remove the Left Cover (103) and the Right
Cover (102). (Refer to 2.2.2.)
(4) Disconnect Connector CN14 on the SC PC
Board.
(5) Release the Stopper Latch (210) and open the
Control Panel Unit.
(6) Remove the Control Panel Unit.
(7) Remove 2 Screws (19).
(8) Remove the Control Panel Chassis (201)
(8) Remove the Control Panel Chassis (201)
Assembly.
Note:
If noise occurs while scanning, clean the Roller
Shaft 2 (235) and the Feed Pinch Roller (236)
shaft hole with isopropyl alcohol.
Shaft 2 (235) and the Feed Pinch Roller (236)
shaft hole with isopropyl alcohol.
(9) Remove 15 Screws (7B).
(10) Disconnect Connector CN50 on the PNL1 PC
Board.
(11) Release 1 Latch Hook.
(12) Remove the PNL1 PC Board (1004).
(2)
(1)
(6)
(4)
(5)
(7)
(8)
(9)
(10)
(11)
(12)
Click on the first or last page to see other DX-600 / DX-800 service manuals if exist.