Panasonic DMC-LX1PP / DMC-LX1EB / DMC-LX1EG / DMC-LX1EGM / DMC-LX1GC / DMC-LX1GD / DMC-LX1GK / DMC-LX1GN / DMC-LX1GT / DMC-LX1SG Service Manual ▷ View online
33
8.5.5.
Phase alignment of the 3rd Lens
Frame Move Unit and Fixed Frame
Frame Move Unit and Fixed Frame
8.5.6.
Assembly for the Zoom Motor Unit
and Master Flange Unit
and Master Flange Unit
34
8.6.
Removal of the CCD
To prevent the CCD unit from catching the dust and dirt, do not
remove the CCD unit except for replacing.
remove the CCD unit except for replacing.
35
9 Measurements and Adjustments
9.1.
Adjustment Procedures
Even if the MAIN PCB is replaced as a unit, it must be achieved the adjustment and factory setting. The adjustment in this
unit is separated two types as shown below.
The adjustment instruction is available at "Software download" on the "Support Information from NWBG-PAVC" web-site
in "TSN System".
unit is separated two types as shown below.
The adjustment instruction is available at "Software download" on the "Support Information from NWBG-PAVC" web-site
in "TSN System".
1. Main unit adjustment: All adjustments except for LCD adjustment.
This unit mounts the adjustment software for main unit, it wouldn’t need the connection between the PC and this unit with USB
cable.
cable.
2. LCD adjustment: Adjustment for LCD.
It need the connection between the PC and this unit with USB cable.
The adjustment instruction is available at "Software download" on the "Support Information from NWBG-PAVC" web-site in
"TSN System", together with maintenance software.
The adjustment instruction is available at "Software download" on the "Support Information from NWBG-PAVC" web-site in
"TSN System", together with maintenance software.
10 Maintenace
10.1. Cleanig Lens and LCD Panel
Do not touch the surface of lens and LCD Panel with your hand.
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface.
Note:
When cleaning the lens, use air-Blower to blow off the dust.
When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface.
Note:
A lens cleaning paper and lens cleaner are available at local camera shops and market place.
S-1
S1. ABOUT INDICATION OF THE SCHEMATIC DIAGRAMS ....... S-1
S1.1. IMPORTANT SAFETY NOTICE: ........................................... S-1
S2. BLOCK DIAGRAM ................................................................... S-2
S2.1. OVERALL BLOCK DIAGRAM ............................................... S-2
S2.2. SYSTEM CONTROL BLOCK DIAGRAM .............................. S-3
S2.3. VIDEO/AUDIO PROCESS BLOCK DIAGRAM ..................... S-4
S2.4. SENSOR BLOCK DIAGRAM ................................................ S-5
S2.5. LENS DRIVE BLOCK DIAGRAM .......................................... S-6
S2.6. POWER BLOCK DIAGRAM ................................................. S-7
S3. SCHEMATIC DIAGRAMS ........................................................ S-8
S3.1. INTERCONNECTION DIAGRAM ......................................... S-8
S3.2. AF-ASSIST SCHEMATIC DIAGRAMS .................................. S-9
S3.3. TOP-OPE SCHEMATIC DIAGRAMS .................................... S-9
S3.4. FLASH FLEX SCHEMATIC DIAGRAMS ............................ S-10
S3.5. AFMF-ASPECT SCHEMATIC DIAGRAMS ......................... S-11
S3.6. LENS FLEX SCHEMATIC DIAGRAMS ............................... S-11
S3.7. CCD FLEX SCHEMATIC DIAGRAMS ................................ S-12
S4. PRINT CIRCUIT BOARD ....................................................... S-13
S4.1. AF-ASSIST P.C.B. ............................................................... S-13
S4.2. TOP-OPE P.C.B. ................................................................. S-13
S4.3. FLASH P.C.B. ...................................................................... S-14
S4.4. AFMF-ASPECT FLEX ......................................................... S-14
S4.6. LENS FLEX ......................................................................... S-15
S4.7. CCD FLEX .......................................................................... S-15
S5. REPLACEMENT PARTS LIST ............................................... S-17
S6. EXPLODED VIEWS ............................................................... S-22
S6.1. FRAME & CASING SECTION (1) ....................................... S-22
S6.2. FRAME & CASING SECTION (2) ...................................... S-23
S6.3. PACKING PARTS & ACCESSORIES SECTION ................. S-24
Table of contents
Service Manual
Digital Camera
Vol. 1
Colour
(S)...........Silver Type (Except GD)
(K)...........Black Type (Except GN/GT/SG)
DMC-LX1PP
DMC-LX1EB
DMC-LX1EG
DMC-LX1EGM
DMC-LX1GC
DMC-LX1GD
DMC-LX1GK
DMC-LX1GN
DMC-LX1GT
DMC-LX1SG
DSC0508018CE
Diagrams and Replacement
Parts List
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as "●" mark.
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
6.Use the parts number indicated on the Replacement Parts List .
COMPONENTS IDENTIFIED WITH THE MARK
HAVE THE SPECIAL CHARACTERISTICS
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
7.Indication on Schematic diagrams:
OFTR
FEP
Circuit name being connected.
Name of Signal
This signal is connected
to the EFP schematic diagram
S1. ABOUT INDICATION OF THE SCHEMATIC DIAGRAMS
S1.1. IMPORTANT SAFETY NOTICE:
Click on the first or last page to see other DMC-LX1PP / DMC-LX1EB / DMC-LX1EG / DMC-LX1EGM / DMC-LX1GC / DMC-LX1GD / DMC-LX1GK / DMC-LX1GN / DMC-LX1GT / DMC-LX1SG service manuals if exist.