Panasonic DMC-LX1PP / DMC-LX1EB / DMC-LX1EG / DMC-LX1EGM / DMC-LX1GC / DMC-LX1GD / DMC-LX1GK / DMC-LX1GN / DMC-LX1GT / DMC-LX1SG Service Manual ▷ View online
21
7.3.
Service Position
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
Table S1 Extension Cable List
CAUTION-1. (When servicing FLASH PCB)
1. Be sure to discharge the capacitor on FLASH PCB.
Refer to “How to Discharge the Capacitor on Flash PCB”.
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on FLASH PCB.
3. DO NOT allow other parts to touch the high voltage circuit on FLASH PCB.
3. DO NOT allow other parts to touch the high voltage circuit on FLASH PCB.
No.
Parts No.
Connection
Form
1
VFK1951
FP9001 (MAIN) - LENS FPC
39PIN 0.3 FFC
2
VFK1480
FP9002 (MAIN) - AFMF-ASPECT FPC
6PIN 0.5 FFC
3
VFK1976
FP9003 (MAIN) - LCD FPC
19PIN 0.5 FFC
4
VFK1974
FP9004 (MAIN) - BACKLIGHT FPC
4PIN 0.5 FFC
5
VFK1950
FP9005 (MAIN) - CCD FPC
33PIN 0.3 FFC
6
VFK1582A1225
FP9006 (MAIN) - FP8001 (FLASH)
12PIN 0.5 FFC
7
VFK1576DSC04
P9001 (MAIN) - AF ASSIST PCB
2PIN CABLE
8
VFK1870
PP9001 (MAIN) - PP9901 (TOP OPERATION)
30PIN B to B
9
VFK1576DSC03
P8001 (FLASH) - FLASH UNIT
2PIN CABLE
10
VFK1576DC202
P8002 (FLASH) - FLASH UNIT
2PIN CABLE
22
8 Disassembly and Assembly Instructions
8.1.
Disassembly Flow Chart
8.2.
PCB Location
23
8.3.
Disassembly Procedure
8.3.1.
Removal of the Rear Case Unit
Fig. D1
No.
Item
Fig
Removal
1
Rear Case Unit
Fig. D1
Card
Battery
3 Screws (A)
1 Screw (B)
FP9003(Flex)
FP9004(Flex)
Rear Case Unit
Battery
3 Screws (A)
1 Screw (B)
FP9003(Flex)
FP9004(Flex)
Rear Case Unit
2
LCD Unit
Fig. D2
LCD Unit
3
Top Operation Unit
Fig. D3
1 Screw (C)
1 Screw (D)
FP9006(Flex)
Capton Tape
Top Operation Unit
1 Screw (D)
FP9006(Flex)
Capton Tape
Top Operation Unit
4
Front Case Unit
Fig. D4
FP9002(Flex)
2 Screws (E)
1 Screw (F)
3 Screws (G)
Front Case Unit
2 Screws (E)
1 Screw (F)
3 Screws (G)
Front Case Unit
5
Main PCB
Fig. D5
2 Screws (H)
Jack Door unit
FP9001(Flex)
FP9006(Flex)
P9001(Connector)
1 Locking tab
Main PCB
Jack Door unit
FP9001(Flex)
FP9006(Flex)
P9001(Connector)
1 Locking tab
Main PCB
6
Lens Unit
Fig. D6
1 Locking tab
Lens Unit
Lens Unit
7
Battery Case
Fig. D7
1 Screw (I)
3 Locking tabs
Strap Holder
Battery Case
3 Locking tabs
Strap Holder
Battery Case
8
Top Operation PCB
Fig. D8
4 Screws (J)
Top Operation PCB
Top Operation PCB
9
Flash Unit
Fig. D10
1 Screw (K)
1 Locking tab
Nut Plate
Flash Unit
1 Locking tab
Nut Plate
Flash Unit
10
Flash PCB
Fig. D11
P8001(Connector)
P8002(Connector)
2 Locking tabs
Flash PCB
P8002(Connector)
2 Locking tabs
Flash PCB
11
Lens Ornament Unit
Fig. D12
3 Screws (L)
Lens Ornament Unit
Lens Ornament Unit
12
AF-MF Aspect FPC
Fig. D13
2 Screws (M)
AS Click Spring
AF Click Spring
2 Focus Knobs
2 Focus Sheets
AS Click Spring
AF Click Spring
2 Focus Knobs
2 Focus Sheets
Fig. D14
1 Screw (N)
Lens Frame
2 Screws (O)
AF-MF Aspect FPC
Lens Frame
2 Screws (O)
AF-MF Aspect FPC
24
8.3.2.
Removal of the LCD Unit
Fig. D2
8.3.3.
Removal of the Top Operation Unit
Fig. D3
Click on the first or last page to see other DMC-LX1PP / DMC-LX1EB / DMC-LX1EG / DMC-LX1EGM / DMC-LX1GC / DMC-LX1GD / DMC-LX1GK / DMC-LX1GN / DMC-LX1GT / DMC-LX1SG service manuals if exist.