Panasonic DMC-LX1PP / DMC-LX1EB / DMC-LX1EG / DMC-LX1EGM / DMC-LX1GC / DMC-LX1GD / DMC-LX1GK / DMC-LX1GN / DMC-LX1GT / DMC-LX1SG Service Manual ▷ View online
29
Fig. D14
NOTE: (When Assembling)
Confirm the contents as shown below.
• Condition of the screw is tightened.
• Assembling condition of mechanism parts (distortion, space
• Assembling condition of mechanism parts (distortion, space
etc.)
• Dust and dirt of the lens, display condition of the LCD (gradi-
ent etc.)
• Dust and dirt of the LCD
8.4.
Disassembly Procedure for the
Lens
Lens
NOTE: When Disassembling and Assembling for the Lens
1. To prevent the lens from catching the dust and dirt, per-
form the following procedures with the CCD unit is install-
ing.
Disassembling procedures for the CCD unit, refer to item
8.6.
ing.
Disassembling procedures for the CCD unit, refer to item
8.6.
2. Take care that the dust and dirt are not entered into the
lens.
In case of the dust is putted on the lens, blow off them by
airbrush.
In case of the dust is putted on the lens, blow off them by
airbrush.
3. Do not touch the surface of lens.
4. Use lens cleaning KIT (BK)(VFK1900BK).
5. Apply the grease (VFK1829) to the point where is shown
4. Use lens cleaning KIT (BK)(VFK1900BK).
5. Apply the grease (VFK1829) to the point where is shown
to" Grease apply" in the figure.
When the grease is applied, use a toothpick and apply
thinly.
When the grease is applied, use a toothpick and apply
thinly.
8.4.1.
Removal of the Zoom Motor Unit
and Master Flange Unit
and Master Flange Unit
1. Remove the solders (2 points).
2. Remove the lock (4 points).
3. Unscrew the 5 screws (A).
4. Remove the Zoom Motor Unit to the indicated by arrow.
5. Remove the master flange unit.
2. Remove the lock (4 points).
3. Unscrew the 5 screws (A).
4. Remove the Zoom Motor Unit to the indicated by arrow.
5. Remove the master flange unit.
30
8.4.2.
Removal of the Drive/Direct Unit,
1st Lens Frame/2nd Lens Frame
Move Unit, 3rd Lens Frame Move
Unit
1st Lens Frame/2nd Lens Frame
Move Unit, 3rd Lens Frame Move
Unit
1. Turn the drive gear to the indicated by arrow fully.
1. Push the drive unit to the indicated by arrow from lens
side, and then remove the unit of drive/direct unit, 1st lens
frame/2nd lens frame move unit, 3rd lens frame move
unitfrom the fixed frame unit.
frame/2nd lens frame move unit, 3rd lens frame move
unitfrom the fixed frame unit.
1. Push the 1st lens frame move unit to the indicated by
arrow from lens side, and then remove the unit of 1st lens
frame/2nd lens frame move/ 3rd lens frame moveunit
from the drive/direct unit.
frame/2nd lens frame move/ 3rd lens frame moveunit
from the drive/direct unit.
1. Push the 3rd lens frame move unit to the indicated by
arrow.
31
8.4.3.
Removal of the Direct Frame
8.4.4.
Removal of the 2nd Lens Frame
Move Unit
Move Unit
8.5.
Assembly Procedure for the
Lens
Lens
8.5.1.
Phase alignment of the Direct
Frame and Drive Frame Unit
Frame and Drive Frame Unit
32
8.5.2.
Phase alignment of the Drive/Direct
Unit and Fixed Frame
Unit and Fixed Frame
8.5.3.
Phase alignment of the 1st Lens
Frame Unit and Fixed Frame
Frame Unit and Fixed Frame
8.5.4.
Phase alignment of the 2nd Lens
Frame Move Unit and Fixed Frame
Frame Move Unit and Fixed Frame
Click on the first or last page to see other DMC-LX1PP / DMC-LX1EB / DMC-LX1EG / DMC-LX1EGM / DMC-LX1GC / DMC-LX1GD / DMC-LX1GK / DMC-LX1GN / DMC-LX1GT / DMC-LX1SG service manuals if exist.