Panasonic DMC-GF1CPP / DMC-GF1CEB / DMC-GF1CEC / DMC-GF1CEG / DMC-GF1CGC / DMC-GF1CGH / DMC-GF1CGK / DMC-GF1CGN / DMC-GF1KPP / DMC-GF1KEB / DMC-GF1KEC / DMC-GF1KEG / DMC-GF1KGC / DMC-GF1KGH / DMC-GF1KGK / DMC-GF1KGN / DMC-GF1PP / DMC-GF1EB / DMC-GF1EC / DMC-GF1EG / Service Manual ▷ View online
21
About Motion Pictures (AVCHD Lite/Motion JPEG)
General description
1
What is bit rate
This is the volume of data for definite period of time, and the quality becomes higher
when the number gets bigger. This unit is using the “VBR” recording method. “VBR”
is an abbreviation of “Variable Bit Rate”, and the bit rate (volume of data for definite
period of time) is changed automatically depending on the subject to record.
Therefore, the recording time is shortened when a subject with fast movement is
recorded.
when the number gets bigger. This unit is using the “VBR” recording method. “VBR”
is an abbreviation of “Variable Bit Rate”, and the bit rate (volume of data for definite
period of time) is changed automatically depending on the subject to record.
Therefore, the recording time is shortened when a subject with fast movement is
recorded.
2
What is Mbps
This is an abbreviation of “Megabit Per Second”, and it represents the speed of
transmission.
transmission.
Recording format
Effect
[AVCHD Lite]
Select this format to record HD (high definition) video for
playback on your HDTV using an HDMI connection.
playback on your HDTV using an HDMI connection.
[MOTION JPEG]
Select this format to record standard definition video for
playback on your PC. It can be recorded using less
storage when there is not much space left on the memory
card or when you want to attach the motion picture to an
e-mail.
playback on your PC. It can be recorded using less
storage when there is not much space left on the memory
card or when you want to attach the motion picture to an
e-mail.
Item
Quality (bit rate)
1
fps
Aspect
ratio
High
quality
Longer
time
([SH])
1280
M720 pixels 17 Mbps
2
60p
(Sensor
output is
30 fps)
16:9
([H])
1280
M720 pixels 13 Mbps
2
([L])
1280
M720 pixels 9 Mbps
2
[Only for “PP” model]
Item
Quality (bit rate)
1
fps
Aspect
ratio
High
quality
Longer
time
([SH])
1280
M720 pixels 17 Mbps
2
50p
(Sensor
output is
25 fps)
16:9
([H])
1280
M720 pixels 13 Mbps
2
([L])
1280
M720 pixels 9 Mbps
2
[Except for “PP” model]
When [AVCHD Lite] is selected
22
When [MOTION JPEG] is selected
3
This item cannot be set in the Intelligent Auto Mode.
s With the [AVCHD Lite] or [
] for [MOTION JPEG], high quality motion picture can be
enjoyed on the TV by using the HDMI mini cable (optional).
Item
Picture size
fps
Aspect
ratio
High
quality
Longer
time
([HD])
1280
M720 pixels
30
16:9
3
([WVGA])
848
M480 pixels
([VGA])
640
M480 pixels
4:3
([QVGA])
320
M240 pixels
Note
s It is recommended to use a card with SD Speed Class
1
with “Class 6” or higher when
recording motion pictures.
1 The SD Speed Class Rating is the speed standard for successive writes.
s When you set the picture quality to [
], [
] or [
], we recommend using a high-speed card
with “10MB/s” or greater displayed on the package.
s The motion picture recording may stop in the middle when any of the following cards are used.
– Cards on which recording and deleting have been repeated many times
– Cards which have been formatted using a PC or other equipment
– Cards which have been formatted using a PC or other equipment
Before taking pictures, format the card in the unit. Because formatting will delete all data
recorded on the card, save important data beforehand on the computer.
recorded on the card, save important data beforehand on the computer.
s Motion pictures recorded in [AVCHD Lite] or [MOTION JPEG] may be played back with
poor picture or sound quality or playback may not be possible even when played back
with equipment compatible with these formats. Also, the recording information may not
with equipment compatible with these formats. Also, the recording information may not
be displayed properly. In this case, use this unit.
For details on AVCHD compatible devices, refer to the support sites below.
For details on AVCHD compatible devices, refer to the support sites below.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
s Motion picture recorded in [AVCHD Lite] cannot be played back on the equipment that is not
compatible to the AVCHD (conventional DVD recorder, etc.), so read the instruction manual for
the equipment in use for the action.
the equipment in use for the action.
s Motion picture recorded in [AVCHD Lite] does not comply with the “DCF/Exif”, so some
information will not display while playback.
s Sound from motion pictures (When [REC MODE] is set to [MOTION JPEG]) or pictures
with audio recorded by this camera cannot be played back by older models of
Panasonic digital cameras (LUMIX) launched before July 2008.
23
Cautions for Use
Take care not to drop or knock the unit or put a lot of pressure on it.
s Take care not to knock or drop the bag/case that you inserted the camera in as the shock may
cause damage to the camera, lens or LCD monitor.
s Do not use a paper bag as it can easily rip causing the camera to fall and be damaged.
s We strongly recommend you purchase a good camera bag/case from your local dealer to
s We strongly recommend you purchase a good camera bag/case from your local dealer to
protect your camera.
Keep the camera as far away as possible from electromagnetic equipment (such as
microwave ovens, TVs, video games etc.).
microwave ovens, TVs, video games etc.).
s If you use the camera on top of or near a TV, the pictures and sound on the camera may be
disrupted by electromagnetic wave radiation.
s Do not use the camera near cell phones because doing so may result in noise adversely
affecting the pictures and sound.
s Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields
created by speakers or large motors.
s Electromagnetic wave radiation generated by microprocessors may adversely affect the
camera, disturbing the pictures and sound.
s If the camera is adversely affected by electromagnetic equipment and stops functioning
properly, turn the camera off and remove the battery or disconnect AC adaptor. Then reinsert
the battery or reconnect AC adaptor and turn the camera on.
the battery or reconnect AC adaptor and turn the camera on.
Do not use the camera near radio transmitters or high-voltage lines.
s If you record near radio transmitters or high-voltage lines, the recorded pictures and sound may
be adversely affected.
Always use the supplied cords and cables. If you use optional accessories, use the
cords and the cables supplied with them.
Do not extend the cords or the cables.
cords and the cables supplied with them.
Do not extend the cords or the cables.
Do not spray the camera with insecticides or volatile chemicals.
s If the camera is sprayed with such chemicals, the body of the camera may be damaged and the
surface finish may peel off.
s Do not keep rubber or plastic products in contact with the camera for a long period of time.
Before cleaning the camera, remove the battery or disconnect the power plug from
the outlet. Then wipe the camera with a dry soft cloth.
the outlet. Then wipe the camera with a dry soft cloth.
s When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth,
and then with a dry cloth.
s Wipe off any dirt or dust on the zoom ring and the focus ring with a dry, dustless cloth.
s Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the
s Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the
camera, since it may deteriorate the external case or the coating may peel off.
s When using a chemical cloth, be sure to follow the accompanying instructions.
Optimal use of the camera
Cleaning
About dirt on the image sensor
This camera features an interchangeable lens system so dirt may get inside the camera
body when changing lenses. Depending on the recording conditions, dirt on the image
sensor may appear on the recorded picture.
Do not change lenses where there is a lot of dust, and always attach the body cap when a
lens is not attached to the camera, so that dirt or dust does not get inside the camera body.
Remove any dirt on the body cap before attaching it.
body when changing lenses. Depending on the recording conditions, dirt on the image
sensor may appear on the recorded picture.
Do not change lenses where there is a lot of dust, and always attach the body cap when a
lens is not attached to the camera, so that dirt or dust does not get inside the camera body.
Remove any dirt on the body cap before attaching it.
Removing dirt on the image sensor
The image sensor is very precise and delicate, so be sure to observe the following when
you do have to clean it yourself.
The image sensor is very precise and delicate, so be sure to observe the following when
you do have to clean it yourself.
s Blow off the dust on the surface of the image sensor with a commercially available blower
brush. Be careful not to blow too strongly.
s Do not put the blower brush further inside than the lens mount.
s Do not let the blower brush touch the image sensor as the image sensor may get scratched.
s Do not use any objects except a blower brush to clean the image sensor.
s Do not let the blower brush touch the image sensor as the image sensor may get scratched.
s Do not use any objects except a blower brush to clean the image sensor.
Dust reduction function
This unit has a dust reduction function that will blow off the debris and dust that have
affixed to the front of the imaging device. This function will function automatically when
the camera is turned on, but if you see dust, perform the [SENSOR CLEANING]
in the [CUSTOM MENU] menu.
This unit has a dust reduction function that will blow off the debris and dust that have
affixed to the front of the imaging device. This function will function automatically when
the camera is turned on, but if you see dust, perform the [SENSOR CLEANING]
in the [CUSTOM MENU] menu.
24
s Do not press the LCD monitor with excessive force. Uneven colors may appear on the LCD
monitor and it may malfunction.
s If the camera is cold when you turn it on, the picture on the LCD monitor/Optional external
viewfinder will be slightly darker than usual at first. However, the picture will return to normal
brightness when the internal temperature of the camera increases.
brightness when the internal temperature of the camera increases.
About the LCD monitor/Optional external viewfinder
Extremely high precision technology is employed to produce the LCD monitor/Optional
external viewfinder screen. However there may be some dark or bright spots (red, blue
or green) on the screen. This is not a malfunction. The LCD monitor/Optional external
viewfinder screen has more than 99.99% effective pixels with a mere 0.01% of the
pixels inactive or always lit. The spots will not be recorded on pictures on a card.
external viewfinder screen. However there may be some dark or bright spots (red, blue
or green) on the screen. This is not a malfunction. The LCD monitor/Optional external
viewfinder screen has more than 99.99% effective pixels with a mere 0.01% of the
pixels inactive or always lit. The spots will not be recorded on pictures on a card.
s Do not press the lens with excessive force.
s Do not leave the camera with the lens facing the sun as rays of light from the sun may cause it
s Do not leave the camera with the lens facing the sun as rays of light from the sun may cause it
to malfunction. Also, be careful when placing the camera outside or near a window.
s When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the picture may
be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking
pictures.
pictures.
s Do not place the lens mount facing downwards. Do not allow the lens mount contacts to
become dirty.
The battery is a rechargeable lithium ion battery. Its ability to generate power comes
from the chemical reaction that takes place inside it. This reaction is susceptible to
the surrounding temperature and humidity. If the temperature is too high or too low,
the operating time of the battery will become shorter.
from the chemical reaction that takes place inside it. This reaction is susceptible to
the surrounding temperature and humidity. If the temperature is too high or too low,
the operating time of the battery will become shorter.
Always remove the battery after use.
If you drop the battery accidentally, check to see if the body of the battery and the
terminals are damaged.
terminals are damaged.
s Inserting a damaged battery in the camera will damage the camera.
Bring charged spare batteries when going out.
s Be aware that the operating time of the battery becomes shorter in low temperature conditions
such as at a ski resort.
s When you travel, do not forget to bring the battery charger (supplied) and the AC cable
(supplied) so that you can charge the battery in the country that you are traveling in.
Dispose of unusable battery.
s The battery has a limited life.
s Do not throw the battery into fire because it may cause an explosion.
s The unusable battery should be discarded in accordance with battery recycling laws. Call the
s Do not throw the battery into fire because it may cause an explosion.
s The unusable battery should be discarded in accordance with battery recycling laws. Call the
RBRC hotline at 1-800-822-8837 for information.
Do not allow battery terminals to come into contact with metal objects (such as
necklaces, hairpins etc.).
necklaces, hairpins etc.).
s This can cause short circuiting or heat generation and you may be badly burned if you touch a
battery.
s If you use the battery charger near a radio, the radio reception may be disturbed.
s Keep the charger 1 m (3.28 feet) or more away from radios.
s The charger may generate whirring sounds when it is being used. This is not a malfunction.
s After use, be sure to disconnect the power supply device from the electrical outlet. (A very
s Keep the charger 1 m (3.28 feet) or more away from radios.
s The charger may generate whirring sounds when it is being used. This is not a malfunction.
s After use, be sure to disconnect the power supply device from the electrical outlet. (A very
small amount of current is consumed if it is left connected.)
s Keep the terminals of the charger and battery clean.
About the Lens
Battery
Charger
Click on the first or last page to see other DMC-GF1CPP / DMC-GF1CEB / DMC-GF1CEC / DMC-GF1CEG / DMC-GF1CGC / DMC-GF1CGH / DMC-GF1CGK / DMC-GF1CGN / DMC-GF1KPP / DMC-GF1KEB / DMC-GF1KEC / DMC-GF1KEG / DMC-GF1KGC / DMC-GF1KGH / DMC-GF1KGK / DMC-GF1KGN / DMC-GF1PP / DMC-GF1EB / DMC-GF1EC / DMC-GF1EG / service manuals if exist.