Panasonic DMC-G1KPP / DMC-G1KEB / DMC-G1KEC / DMC-G1KEG / DMC-G1KGC / DMC-G1KGD / DMC-G1KGH / DMC-G1KGK / DMC-G1KGN / DMC-G1KGT / DMC-G1KGJ / DMC-G1KGC9 Service Manual ▷ View online
17
About the Lens
This unit can use the dedicated lenses compatible to the Micro Four Thirds System lens
mount specification (Micro Four Thirds mount) such as the lenses included in DMC-G1K.
Select a lens that matches the scene being recorded and your use of the pictures.
If you use a lens other than a dedicated interchangeable lens, auto focus cannot be
activated and accurate metering is not possible. Also, some functions will not work.
mount specification (Micro Four Thirds mount) such as the lenses included in DMC-G1K.
Select a lens that matches the scene being recorded and your use of the pictures.
If you use a lens other than a dedicated interchangeable lens, auto focus cannot be
activated and accurate metering is not possible. Also, some functions will not work.
“Micro Four Thirds Mount”
This is the lens mount standard for the
“Micro Four Thirds System”.
This was newly developed as
interchangeable lens dedicated for digital
cameras.
“Micro Four Thirds System”.
This was newly developed as
interchangeable lens dedicated for digital
cameras.
When using lenses other than the lenses included in DMC-G1K
s
Depending on the type of lens, you may not be able to use some functions such as the direction
detection function, [STABILIZER], Quick AF and Continuous AF.
detection function, [STABILIZER], Quick AF and Continuous AF.
s
The available flash range etc. differs depending on the aperture value of the lens you are using.
s
Take some test pictures with the lens you are using.
s
Lens with the Four Thirds™ mount
specification can be used by using the mount
adaptor (DMW-MA1; optional). However,
[AFC] mode and continuous AF function
cannot be used. Only manual focus is
possible when using a lens that is not
compatible with the Contrast AF. There are
some restrictions to some other functions too.
specification can be used by using the mount
adaptor (DMW-MA1; optional). However,
[AFC] mode and continuous AF function
cannot be used. Only manual focus is
possible when using a lens that is not
compatible with the Contrast AF. There are
some restrictions to some other functions too.
Because of its structure, Micro Four Thirds mount specification lenses cannot be used on
the Four Thirds mount specification cameras. It can only be used on the Micro Four Thirds
mount specification cameras.
the Four Thirds mount specification cameras. It can only be used on the Micro Four Thirds
mount specification cameras.
Lens Installation Combination Diagram
Micro Four Thirds mount
specification lens
Four Thirds mount
specification lens
Mount adaptor (DMW-MA1)
Micro Four Thirds mount
Micro Four Thirds mount
specification camera
(DMC-G1)
(DMC-G1)
Four Thirds mount
specification camera
It cannot be mounted on the Four
Thirds mount specification camera.
Thirds mount specification camera.
Refer to catalogues/Web pages for most current information regarding compatible lenses.
http://panasonic.co.jp/pavc/global/cs (This Site is English only.)
http://panasonic.co.jp/pavc/global/cs (This Site is English only.)
18
Cautions for Use
In the event of abnormal operation (e.g. if the unit emits smoke or an unusual smell),
immediately stop operating the unit and consult the Panasonic Customer Care Centre on
132600.
immediately stop operating the unit and consult the Panasonic Customer Care Centre on
132600.
Take care not to drop or knock the unit or put a lot of pressure on it.
s
Take care not to knock or drop the bag/case that you inserted the camera in as the shock may
cause damage to the camera, lens or LCD monitor.
cause damage to the camera, lens or LCD monitor.
s
Do not use a paper bag as it can easily rip causing the camera to fall and be damaged.
s
We strongly recommend you purchase a good camera bag/case from your local dealer to
protect your camera.
protect your camera.
Keep the camera as far away as possible from electromagnetic equipment (such as
microwave ovens, TVs, video games etc.).
microwave ovens, TVs, video games etc.).
s
If you use the camera on top of or near a TV, the pictures on the camera may be disrupted by
electromagnetic wave radiation.
electromagnetic wave radiation.
s
Do not use the camera near cell phones because doing so may result in noise adversely
affecting the pictures.
affecting the pictures.
s
Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields
created by speakers or large motors.
created by speakers or large motors.
s
Electromagnetic wave radiation generated by microprocessors may adversely affect the
camera, disturbing the pictures.
camera, disturbing the pictures.
s
If the camera is adversely affected by electromagnetic equipment and stops functioning
properly, turn the camera off and remove the battery or disconnect AC adaptor. Then reinsert
the battery or reconnect AC adaptor and turn the camera on.
properly, turn the camera off and remove the battery or disconnect AC adaptor. Then reinsert
the battery or reconnect AC adaptor and turn the camera on.
Do not use the camera near radio transmitters or high-voltage lines.
s
If you record near radio transmitters or high-voltage lines, the recorded pictures may be
adversely affected.
adversely affected.
Always use the supplied cords and cables. If you use optional accessories, use the
cords and the cables supplied with them.
Do not extend the cords or the cables.
cords and the cables supplied with them.
Do not extend the cords or the cables.
Do not spray the camera with insecticides or volatile chemicals.
s
If the camera is sprayed with such chemicals, the body of the camera may be damaged and the
surface finish may peel off.
surface finish may peel off.
s
Do not keep rubber or plastic products in contact with the camera for a long period of time.
Optimal use of the camera
19
Before cleaning the camera, remove the battery or disconnect the power plug from
the outlet. Then wipe the camera with a dry soft cloth.
the outlet. Then wipe the camera with a dry soft cloth.
s
When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth,
and then with a dry cloth.
and then with a dry cloth.
s
Wipe off any dust or dirt on the zoom ring and the focus ring with a dry, dust cloth.
s
Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the
camera, since it may deteriorate the external case or the coating may peel off.
camera, since it may deteriorate the external case or the coating may peel off.
s
When using a chemical cloth, be sure to follow the accompanying instructions.
About dirt on the image sensor
This camera features an interchangeable lens system so dirt may get inside the camera
body when changing lenses. Depending on the recording conditions, dirt on the image
sensor may appear on the recorded picture.
Do not change lenses where there is a lot of dust, and always attach the body cap when a
lens is not attached to the camera, so that dirt or dust does not get inside the camera body.
Remove any dirt on the body cap before attaching it.
body when changing lenses. Depending on the recording conditions, dirt on the image
sensor may appear on the recorded picture.
Do not change lenses where there is a lot of dust, and always attach the body cap when a
lens is not attached to the camera, so that dirt or dust does not get inside the camera body.
Remove any dirt on the body cap before attaching it.
Removing dirt on the image sensor
The image sensor is very precise and delicate, so be sure to observe the following when
you do have to clean it yourself.
s
The image sensor is very precise and delicate, so be sure to observe the following when
you do have to clean it yourself.
s
Blow off the dust on the surface of the image sensor with a commercially available blower
brush. Be careful not to blow too strongly.
brush. Be careful not to blow too strongly.
s
Do not put the blower brush further inside than the lens mount.
s
Do not let the blower brush touch the image sensor as the image sensor may get scratched.
s
Do not use any objects except a blower brush to clean the image sensor.
s
If you cannot remove the dirt or dust with the blower, consult the dealer or your nearest Service
Centre.
Centre.
s
Do not press the LCD monitor with excessive force. Uneven colours may appear on the LCD
monitor and it may malfunction.
monitor and it may malfunction.
s
If the camera is cold when you turn it on, the picture on the LCD monitor/Viewfinder will be
slightly darker than usual at first. However, the picture will return to normal brightness when the
internal temperature of the camera increases.
slightly darker than usual at first. However, the picture will return to normal brightness when the
internal temperature of the camera increases.
Cleaning
Dust reduction function
This unit has a dust reduction function that will blow off the debris and dust that has
affixed to the front of the imaging device. This function will function automatically when
the camera is turned on, but if you see dust, perform the [PIXEL REFRESH] in the
[CUSTOM MENU] menu.
This unit has a dust reduction function that will blow off the debris and dust that has
affixed to the front of the imaging device. This function will function automatically when
the camera is turned on, but if you see dust, perform the [PIXEL REFRESH] in the
[CUSTOM MENU] menu.
About the LCD monitor/Viewfinder
Extremely high precision technology is employed to produce the LCD monitor/
Viewfinder screen. However there may be some dark or bright spots (red, blue or
green) on the screen. This is not a malfunction. The LCD monitor/Viewfinder screen
has more than 99.99% effective pixels with a mere 0.01% of the pixels inactive or
always lit. The spots will not be recorded on pictures on a card.
Viewfinder screen. However there may be some dark or bright spots (red, blue or
green) on the screen. This is not a malfunction. The LCD monitor/Viewfinder screen
has more than 99.99% effective pixels with a mere 0.01% of the pixels inactive or
always lit. The spots will not be recorded on pictures on a card.
20
s
Do not press the lens with excessive force.
s
Do not leave the camera with the lens facing the sun as rays of light from the sun may cause it
to malfunction. Also, be careful when placing the camera outside or near a window.
to malfunction. Also, be careful when placing the camera outside or near a window.
s
When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the picture may
be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking
pictures.
be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking
pictures.
s
Do not place the lens mount facing downwards. Do not allow the lens mount contacts
to
become dirty.
The battery is a rechargeable lithium ion battery. Its ability to generate power comes
from the chemical reaction that takes place inside it. This reaction is susceptible to
the surrounding temperature and humidity. If the temperature is too high or too low,
the operating time of the battery will become shorter.
from the chemical reaction that takes place inside it. This reaction is susceptible to
the surrounding temperature and humidity. If the temperature is too high or too low,
the operating time of the battery will become shorter.
Always remove the battery after use.
If you drop the battery accidentally, check to see if the body of the battery and the
terminals are damaged.
terminals are damaged.
s
Inserting a damaged battery in the camera will damage the camera.
Bring charged spare batteries when going out.
s
Be aware that the operating time of the battery becomes shorter in low temperature conditions
such as at a ski resort.
such as at a ski resort.
s
When you travel, do not forget to bring the battery charger (supplied) so that you can charge
the battery in the country that you are travelling in.
the battery in the country that you are travelling in.
Dispose of unusable battery.
s
The battery has a limited life.
s
Do not throw the battery into fire because it may cause an explosion.
Do not allow battery terminals to come into contact with metal objects (such as
necklaces, hairpins etc.).
necklaces, hairpins etc.).
s
This can cause short circuiting or heat generation and you may be badly burned if you touch a
battery.
battery.
s
If you use the battery charger near a radio, the radio reception may be disturbed.
s
Keep the charger 1 m or more away from radio.
s
The charger may generate whirring sounds when it is being used. This is not a malfunction.
s
After use, be sure to disconnect the power supply device from the electrical outlet. (A very
small amount of current is consumed if it is left connected.)
small amount of current is consumed if it is left connected.)
s
Keep the terminals of the charger and battery clean.
About the Lens
Battery
Charger
Click on the first or last page to see other DMC-G1KPP / DMC-G1KEB / DMC-G1KEC / DMC-G1KEG / DMC-G1KGC / DMC-G1KGD / DMC-G1KGH / DMC-G1KGK / DMC-G1KGN / DMC-G1KGT / DMC-G1KGJ / DMC-G1KGC9 service manuals if exist.