Panasonic DMC-FT20EE Service Manual ▷ View online
33
8.2.
When Replacing the Main P.C.B.
After replacing the Main P.C.B., be sure to achieve adjustment.
The Maintenance software (DIAS) is available at "software download" on the "Support Information from NWBG/VDBG-AVC" web-
site in "TSN system".
The Maintenance software (DIAS) is available at "software download" on the "Support Information from NWBG/VDBG-AVC" web-
site in "TSN system".
8.3.
Service Position
This Service Position is used for checking and replacing parts. Use the original cables for servicing.
8.3.1.
Extension Cable Connections
CAUTION-1. (When servicing Flash P.C.B.)
1. Be sure to discharge the capacitor on Flash P.C.B.
Refer to "HOW TO DISCHARGE THE CAPACITOR ON FLASH P.C.B.".
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed.
2. Be careful of the high voltage circuit on Flash P.C.B.
3. DO NOT allow other parts to touch the high voltage circuit on Flash P.C.B.
3. DO NOT allow other parts to touch the high voltage circuit on Flash P.C.B.
34
9 Disassembly and Assembly Instructions
9.1.
Disassembly Flow Chart
9.2.
P.C.B. Location
35
9.3.
Disassembly Procedures
9.3.1.
Removal of Front Almi Case Unit
Fig. D1
No.
Item
Fig.
Removal
1 Front Almi Case Unit
Fig. D1 5 Screws (A)
Front Almi Case Unit
2 Rear Almi Case/
Side Ornament R
Fig. D2 2 Screws (B)
Rear Aluminum Case
Side Ornament R
Side Ornament R
3 Top Case
Fig. D3 1 Screw (C)
2 Locking tabs
Shutter Button
POWER/REC Button
Top Case
Shutter Button
POWER/REC Button
Top Case
4 Rear Case Unit
Fig. D4 5 Screws (D)
FP9004 (Flex)
FP9006 (Flex)
2 Locking tabs
Rear Case Unit
FP9006 (Flex)
2 Locking tabs
Rear Case Unit
Fig. D5 Note:(When attaching Rear
Case Unit)
5 Camera Lens Unit
Fig. D6 FP9002 (Flex)
FP9003 (Flex)
Camera Lens Unit
Camera Lens Unit
6 Main P.C.B.
Fig. D7 2 Screws (E)
1 Screw (F)
DPR Sheet
Speaker
FP9001 (Flex)
FP9005 (Flex)
FP9007 (Flex)
P9001 (Connector)
Main P.C.B.
DPR Sheet
Speaker
FP9001 (Flex)
FP9005 (Flex)
FP9007 (Flex)
P9001 (Connector)
Main P.C.B.
7 Top Button Plate/Top
Button Packing
Fig. D8 2 Screws (G)
1 Locking tab
2 Screw O Rings
Top Button Plate
Top Button Packing
2 Screw O Rings
Top Button Plate
Top Button Packing
8 Top P.C.B.
Fig. D9 Top P.C.B.
9 Battery P.C.B.
Fig. D10 3 Screws (H)
FP9201 (Flex)
Battery Case
Battery Barrier Sheet
Battery P.C.B.
Battery Case
Battery Barrier Sheet
Battery P.C.B.
Fig. D11 Note:(When attaching
Battery P.C.B.)
10 Flash P.C.B.
Fig. D12 1 Screw (I)
FP8001 (Flex)
LCD FPC Sheet
Flash P.C.B.
LCD FPC Sheet
Flash P.C.B.
11 Battery Door Unit
(Battery Door Packing)
Fig. D13 2 Screws (J)
Battery Door Shaft
Battery Door Spring
Battery Door Unit (Battery
Door Packing)
Battery Door Spring
Battery Door Unit (Battery
Door Packing)
12 Rear Operation P.C.B.
Fig. D14 5 Screws (K)
2 Locking tabs
Frame Plate Unit
Frame Plate Unit
Fig. D15 Rear Operation P.C.B.
13 LCD Unit
Fig. D16 2 Locking tabs (A)
2 Locking tabs (B)
LCD Barrier Sheet
CCD FPC Spacer Sheet
LCD Unit
LCD Barrier Sheet
CCD FPC Spacer Sheet
LCD Unit
36
9.3.2.
Removal of Rear Almi Case/Side
Ornament R
Ornament R
Fig. D2
9.3.3.
Removal of Top Case
Fig. D3
Click on the first or last page to see other DMC-FT20EE service manuals if exist.