Panasonic DMC-FP7P / DMC-FP7PC / DMC-FP7PR / DMC-FP7PU / DMC-FP7EE / DMC-FP7EG / DMC-FP7EP / DMC-FP7GA / DMC-FP7GC / DMC-FP7GF / DMC-FP7GK / DMC-FP7GT Service Manual ▷ View online
21
Important notice about "Error Code List"
1) About "*" indication:
The third digit from the left is different as follows.
1) About "*" indication:
The third digit from the left is different as follows.
- In case of 0 (example: 18001000)
When the third digit from the left shows "0", this error occurred under the condition of INITIAL SETTINGS has been
completed.
It means that this error is occurred basically at user side.
completed.
It means that this error is occurred basically at user side.
- In case of 8 (example: 18801000)
When the third digit from the left shows "8", this error occurred under the condition of INITIAL SETTINGS has been
released.
(Example; Factory assembling-line before unit shipment, Service mode etc.)
It means that this error is occurred at service side.
released.
(Example; Factory assembling-line before unit shipment, Service mode etc.)
It means that this error is occurred at service side.
2) About "?" indication: ("18*0 0?01" to "18*0 0?50"):
The third digit from the right shows one of the hexadecimal ("0" to "F") character.
The third digit from the right shows one of the hexadecimal ("0" to "F") character.
• 4. How to exit from Error Code display mode:
Simply, turn the power off. (Since Error code display mode is executed under the condition of temporary cancellation of "INI-
TIAL SETTINGS", it wake up with normal condition when turn off the power.)
TIAL SETTINGS", it wake up with normal condition when turn off the power.)
NOTE:
The error code can not be initialized.
22
7 Service Fixture & Tools
7.1.
Service Fixture and Tools
The following Service Fixture and tools are used for checking and servicing this unit.
23
8 Disassembly and Assembly Instructions
8.1.
Disassembly Flow Chart
This is a disassembling chart.
When assembling, perform this chart conversely.
When assembling, perform this chart conversely.
8.2.
PCB Location
24
8.3.
Disassembly Procedure
8.3.1.
Removal of the Rear Case Unit
(Fig. D1)
No.
Item
Fig
Removal
1
Rear Case Unit
(Fig. D1)
Card
Battery
1 Screw (A)
4 Screws (B)
1 Screw (C)
Side Ornament (L)
Battery
1 Screw (A)
4 Screws (B)
1 Screw (C)
Side Ornament (L)
(Fig. D2)
Side Ornament (R)
1 Screw (D)
2 Locking tabs
Rear Case Unit
1 Screw (D)
2 Locking tabs
Rear Case Unit
2
Front Case Unit
(Fig. D3)
1 Screw (E)
Strap Holder
Front Case Unit
Strap Holder
Front Case Unit
3
Lens Cover Unit
(Fig. D4)
1 Screw (F)
4 Hanging parts
Lens Cover Spring
Lens Slide Angle
Lens Cover Unit
4 Hanging parts
Lens Cover Spring
Lens Slide Angle
Lens Cover Unit
4
LCD Unit
(Fig. D5)
NOTE: (When Replacing)
(Fig. D6)
2 Screws (G)
Frame Plate
FP9003(Flex)
FP9006(Flex)
LCD Unit
Frame Plate
FP9003(Flex)
FP9006(Flex)
LCD Unit
5
Touch Panel
(Fig. D7)
LCD Unit
Tuch Panel Unit
Tuch Panel Unit
6
Top Case Unit
(Fig. D8)
FP8501(Connector)
Top Case Unit
Top Case Unit
7
Flash P.C.B.
(Fig. D9)
FP9004(Flex)
(Fig. D10) 2 Screws (H)
Flash P.C.B.
(Fig. D11)
Discharge the Capacitor
8
Top Operation P.C.B.
(Fig. D12) 2 Screws (I)
4 Locking tabs
Top Button Unit
Top Operation P.C.B.
Top Button Unit
Top Operation P.C.B.
9
Lens Unit (with CCD)
(Fig. D13) FP9001(Flex)
FP9002(Flex)
Lens Unit
Lens Unit
10
Lens Switch FPC
Main P.C.B.
Main P.C.B.
(Fig. D14) Speaker
1 Screw (J)
1 Locking tab
Lens Slide Base
FP9005(Flex)
1 Screw (K)
Lens Switch FPC
Main P.C.B.
1 Locking tab
Lens Slide Base
FP9005(Flex)
1 Screw (K)
Lens Switch FPC
Main P.C.B.
11
Battery Case
(Fig. D15) Battery Out Spring
2 Locking tabs
Battery Case
Battery Case
12
Battery Door Unit
(Fig. D16) Battery Door Shaft
Battery Door Spring
Battery Door Unit
Battery Door Unit
Click on the first or last page to see other DMC-FP7P / DMC-FP7PC / DMC-FP7PR / DMC-FP7PU / DMC-FP7EE / DMC-FP7EG / DMC-FP7EP / DMC-FP7GA / DMC-FP7GC / DMC-FP7GF / DMC-FP7GK / DMC-FP7GT service manuals if exist.