Panasonic SC-HC35EG / SC-HC35EF / SC-HC35EP Service Manual ▷ View online
41
8.10.2.
Disassembly of Belt, Pully Gear,
Middle Gear and Drive Gear.
Middle Gear and Drive Gear.
• Refer to “Disassembly of Gear Box Assembly”
Step 1 : Remove Belt.
Step 2 : Remove 1 screw.
Step 3 : Remove Pulley Gear.
Step 4 : Remove 1 screw.
Step 5 : Remove Middle Gear.
42
Step 6 : Use the minus screwdriver to release a catch as
shown.
shown.
Step 7 : Remove Drive Gear.
8.10.3.
Disassembly of Motor Assembly.
• Refer to “Disassembly of Gear Box Assembly”
• Refer to “Disassembly of Motor P.C.B.”
• Refer to (Step 1) of item 8.10.2.
• Refer to “Disassembly of Motor P.C.B.”
• Refer to (Step 1) of item 8.10.2.
Step 1 : Remove 2 screws.
Step 2 : Remove Motor Assembly.
Step 2 : Remove Motor Assembly.
43
8.11. Disassembly of Remote Sensor
P.C.B. & iPod Open Switch
P.C.B.
P.C.B.
• Refer to “Disassembly of Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Gear Box Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Gear Box Assembly”
Step 1 : Release the wire from the slots.
Caution : During assembling, ensure the wire is fixed into
the slots.
Step 2 : Remove 2 screws.
Caution : During assembling, ensure the wire is fixed into
the slots.
Step 2 : Remove 2 screws.
Step 3 : Flip over Remote Sensor P.C.B..
Caution : During assembling, ensure the Remote Sensor
P.C.B. is seated properly on the locator.
Caution : During assembling, ensure the Remote Sensor
P.C.B. is seated properly on the locator.
Step 4 : Detach 4P wire at the connector (P901) on the Remote
Sensor P.C.B..
Sensor P.C.B..
44
Step 5 : Lift up the iPod Open Switch P.C.B..
Step 6 : Remove iPod Open Switch P.C.B. & Remote Sensor
P.C.B. together.
P.C.B. together.
8.12. Disassembly of Interlock
Switch P.C.B.
• Refer to “Disassembly of Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Gear Box Assembly”
• Refer to (Step 1) - (Step 5) of item 8.11.
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Gear Box Assembly”
• Refer to (Step 1) - (Step 5) of item 8.11.
Step 1 : Release the Wire from the slots.
Caution : During assembling, ensure the wire is fixed into
the slot.
Caution : During assembling, ensure the wire is fixed into
the slot.
Click on the first or last page to see other SC-HC35EG / SC-HC35EF / SC-HC35EP service manuals if exist.