Panasonic SC-HC35EG / SC-HC35EF / SC-HC35EP Service Manual ▷ View online
37
Caution : During assembling, ensure that the bosses of
Net Frame Assembly (R) are aligned to their respective
holes in Front Speaker Assembly (R) as shown.
Net Frame Assembly (R) are aligned to their respective
holes in Front Speaker Assembly (R) as shown.
8.9.
Disassembly of Front Panel
Block
Block
• Refer to “Disassembly of Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Net Frame Assembly”
Step 1 : Remove 9 screws.
Step 2 : Release the 3 catches on the Front Panel Block.
38
Step 3 : Slightly lift up the Front Panel Block.
Step 4 : Detach 5P wire at the connector (CN1002) on the
iPhone P.C.B..
Step 4 : Detach 5P wire at the connector (CN1002) on the
iPhone P.C.B..
Step 5 : Detach 15P FFC at the connector (CN303) on the
Main P.C.B..
Main P.C.B..
Step 6 : Remove Front Panel Block.
39
8.10. Disassembly of Gear Box
Assembly
• Refer to “Disassembly of Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Remove 3 screws.
Step 2 : Release 2P wire from the locator.
Step 3 : Detach 2P wire at the connector (PR2) on the Motor
P.C.B..
Step 3 : Detach 2P wire at the connector (PR2) on the Motor
P.C.B..
Step 4 : Remove Gear Box Assembly & iPod Docking Spring.
Caution : During assembling, ensure the Gear Box Assem-
bly is seated properly on the locator.
Caution : During assembling, ensure the Gear Box Assem-
bly is seated properly on the locator.
Caution : Keep the iPod Docking Spring in safe place and
place them back during assembling.
place them back during assembling.
40
8.10.1.
Disassembly of Motor P.C.B.
• Refer to “Disassembly of Gear Box Assembly”
Step 1 : Remove 2P wire from slot.
Caution: During assembling, ensure the 2P wire is dress
into the slot.
Caution: During assembling, ensure the 2P wire is dress
into the slot.
Step 2 : Release 2 catches as show.
Step 3 : Remove Motor P.C.B..
Caution : During assembling, ensure the Motor P.C.B. is
properly seated by the 2 catches.
Step 3 : Remove Motor P.C.B..
Caution : During assembling, ensure the Motor P.C.B. is
properly seated by the 2 catches.
Step 4 : Desolder pin on the solder side of Motor P.C.B. and
remove the Motor P.C.B..
remove the Motor P.C.B..
Click on the first or last page to see other SC-HC35EG / SC-HC35EF / SC-HC35EP service manuals if exist.