Panasonic SC-HC35EG / SC-HC35EF / SC-HC35EP Service Manual ▷ View online
25
6.4.
Sales Demonstration Lock Function Mode
6.4.1.
Entering into sales Demo Mode
Here is the procedures to enter into Sales Demonstration Lock.
Step 1 : Turn on the unit.
Step 1 : Turn on the unit.
Step 2 : Select to any mode function, press and hold [
] key and follow by [
] key. It must be pressed within 0.5
sec.
Step 3 : The display will show upon entering into this mode.
Step 3 : The display will show upon entering into this mode.
Note :
button is invalid and the main unit displays “LOCKED” while the lock function mode is entered.
6.4.2.
Cancellation
Step 1 : To cancel only can be triggered in CD Mode and Volume 19.
Step 2 : Press and hold [
] key and follow by [
] key. It must be pressed within 0.5 sec.
Step 3 : The display will show after exit from this mode.
26
7 Service Fixture & Tools
Prepare service tools before process service position.
Ref. No.
Service Tools
Remarks
SFT1
Main P.C.B. (CN7002) - CD Servo P.C.B. (CN7002)
RFKZHC55K1 (27P FFC)
SFT2
Main P.C.B. (CN303) - Remote Sensor P.C.B. (CN300)
RFKZHC55K2 (15P FFC)
SFT3
Main P.C.B. (CN7902) - CD Servo P.C.B. (CN7901)
RFKZHC35 (Extension P.C.B.)
27
8 Disassembly and Assembly Instructions
Caution Note:
• This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo-
nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in the service
manual)
manual)
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with
sharp edges.
• Avoid touching heatsinks due to its high temperature after prolong use. (See caution as described below)
• During disassembly and assembly, please ensure proper service tools, equipments or jigs is being used.
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the ser-
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the ser-
vice manual.
• Select items from the following indexes when disassembly or replacement are required.
• Disassembly of Stand Assembly
• Replacement of Door Assembly
• Replacement of Cam Gear
• Disassembly of Lens Cover
• Disassembly of Net Frame Assembly
• Disassembly of Front Panel Block
• Disassembly of Gear Box Assembly
• Disassembly of Remote Sensor P.C.B. & iPod Open Switch P.C.B.
• Disassembly of Interlock Switch P.C.B.
• Replacement of iPod Tub Assembly
• Disassembly of Mini Side Lock
• Disassembly of iPhone P.C.B.
• Disassembly of Top Guide Reel
• Disassembly of Bottom Guide Reel
• Disassembly of Top Ornament Assembly
• Disassembly of Button P.C.B.
• Disassembly of Top Button & Power Light Piece
• Disassembly of Panel P.C.B.
• Disassembly of Jack Lid
• Disassembly of Tuner P.C.B.
• Disassembly of CD Mechanism
• Disassembly of CD Servo P.C.B.
• Disassembly of SMPS P.C.B.
• Replacement of Diode (D702)
• Replacement of Transistor (Q701)
• Disassembly of Passive Radiator (SP6)
• Disassembly of Passive Radiator (SP5)
• Disassembly of Front Speaker (SP2)
• Disassembly of Front Speaker (SP1)
• Disassembly of Passive Radiator (SP4)
• Disass embly of Passive Radiator (SP3)
• Disassembly of Main P.C.B.
• Replacement of Door Assembly
• Replacement of Cam Gear
• Disassembly of Lens Cover
• Disassembly of Net Frame Assembly
• Disassembly of Front Panel Block
• Disassembly of Gear Box Assembly
• Disassembly of Remote Sensor P.C.B. & iPod Open Switch P.C.B.
• Disassembly of Interlock Switch P.C.B.
• Replacement of iPod Tub Assembly
• Disassembly of Mini Side Lock
• Disassembly of iPhone P.C.B.
• Disassembly of Top Guide Reel
• Disassembly of Bottom Guide Reel
• Disassembly of Top Ornament Assembly
• Disassembly of Button P.C.B.
• Disassembly of Top Button & Power Light Piece
• Disassembly of Panel P.C.B.
• Disassembly of Jack Lid
• Disassembly of Tuner P.C.B.
• Disassembly of CD Mechanism
• Disassembly of CD Servo P.C.B.
• Disassembly of SMPS P.C.B.
• Replacement of Diode (D702)
• Replacement of Transistor (Q701)
• Disassembly of Passive Radiator (SP6)
• Disassembly of Passive Radiator (SP5)
• Disassembly of Front Speaker (SP2)
• Disassembly of Front Speaker (SP1)
• Disassembly of Passive Radiator (SP4)
• Disass embly of Passive Radiator (SP3)
• Disassembly of Main P.C.B.
28
8.1.
Disassembly flow chart
The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the ser-
vicing.
To assemble the unit, reverse the steps shown in the chart below.
vicing.
To assemble the unit, reverse the steps shown in the chart below.
Click on the first or last page to see other SC-HC35EG / SC-HC35EF / SC-HC35EP service manuals if exist.