Panasonic SC-HC35EG / SC-HC35EF / SC-HC35EP Service Manual ▷ View online
53
8.18. Disassembly of Top Ornament
Assembly
• Refer to “Disassembly of Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Detach 12P FFC at the connector (CN901) on the
Main P.C.B..
Main P.C.B..
Step 2 : Remove 2 screws.
Step 3 : Remove Top Ornament Assembly as arrow shown.
Caution : During assembling, ensure the Top Ornament
Assembly is fully catched onto Rear Cabinet Assembly.
Assembly is fully catched onto Rear Cabinet Assembly.
54
8.19. Disassembly of Button P.C.B.
• Refer to “Disassembly of Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Top Ornament Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Top Ornament Assembly”
Step 1 : Remove 4 screws.
Step 2 : Lift up Button P.C.B. from right to left.
Caution: During assembling, ensure the Button P.C.B. is
properly seated below rib.
Caution: During assembling, ensure the Button P.C.B. is
properly seated below rib.
Step 3 : Remove Button P.C.B..
Caution: During assembling, ensure the Button P.C.B. is
fully fix follow the guide and slot into rib by sequence from
1 to 5.
fully fix follow the guide and slot into rib by sequence from
1 to 5.
Caution: During assembling, ensure fix the screw to the
Button P.C.B. follow by sequence from 1 to 4.
Button P.C.B. follow by sequence from 1 to 4.
55
8.20. Disassembly of Top Button &
Power Light Piece
• Refer to “Disassembly of Button P.C.B.”
8.20.1.
Disassembly of Top Button
Step 1 : Lift up the Top Button from right to left.
Step 2 : Remove Top Button.
Caution : During assembling, ensure the holes are aligned
to their respective guides on the Top Ornament as shown.
Caution : During assembling, ensure the holes are aligned
to their respective guides on the Top Ornament as shown.
8.20.2.
Disassembly of Power Light Piece
• Refer to “Disassembly of Top Button”
Step 1 : Use a Tweezers to remove the Power Light Piece from
Top Ornament.
Caution: During assembling of Power Light Piece, ensure
the Power Light Piece is properly seated on the guide.
Top Ornament.
Caution: During assembling of Power Light Piece, ensure
the Power Light Piece is properly seated on the guide.
56
8.21. Disassembly of Panel P.C.B.
• Refer to “Disassembly of Stand Assembly”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Front Panel Block”
• Refer to “Disassembly of Door Assembly”
• Refer to “Disassembly of Net Frame Assembly”
• Refer to “Disassembly of Front Panel Block”
Step 1 : Detach 9P FFC at the connector (CN6801) on the
Panel P.C.B..
Step 2 : Remove 2 screw and Ground Wire.
Panel P.C.B..
Step 2 : Remove 2 screw and Ground Wire.
Step 3 : Release 1 catch.
Step 4 : Remove Panel P.C.B..
Caution : During assembling, ensure the Panel P.C.B. is
seated properly on the locator and catch.
Caution : During assembling, ensure the Panel P.C.B. is
seated properly on the locator and catch.
Click on the first or last page to see other SC-HC35EG / SC-HC35EF / SC-HC35EP service manuals if exist.