Panasonic SC-HC10EB / SC-HC10EG / SC-HC10EP Service Manual ▷ View online
37
Step 3 : Remove 6 screws.
Step 4 : Lift up the Front Cabinet Unit as arrow shown.
Step 5 : Detach 6P wire at the connector (P101) on Main
P.C.B..
Step 6 : Remove Front Cabinet Unit.
P.C.B..
Step 6 : Remove Front Cabinet Unit.
38
9.12. Disassembly of Motor P.C.B.,
Bridge 1 P.C.B. & Position
Switch P.C.B.
Switch P.C.B.
• Refer to "Disassembly of Stand Unit”
• Refer to "Disassembly of Net Frame Unit”
• Refer to "Disassembly of Front Cabinet unit”
• Refer to "Disassembly of Net Frame Unit”
• Refer to "Disassembly of Front Cabinet unit”
Step 1 : Remove 2 screws.
Step 2 : Lift up Motor Assembly.
Step 2 : Lift up Motor Assembly.
Step 3 : Remove 1 screw.
Step 4 : Remove Slider P.C.B..
Step 4 : Remove Slider P.C.B..
Step 5 : Release 1 catch.
Step 6 : Remove Position Switch P.C.B. as arrow shown.
Step 7 : Remove Motor Assembly.
Caution : During assembling of Position Switch P.C.B.,
Step 6 : Remove Position Switch P.C.B. as arrow shown.
Step 7 : Remove Motor Assembly.
Caution : During assembling of Position Switch P.C.B.,
ensure the P.C.B. is slot into the guide first. A “Click”
sound will be heard when fully catched.
Step 8 : Desolder pin on the solder side of Motor P.C.B..
Step 9 : Remove Motor P.C.B., Bridge 1 P.C.B. & Position
Switch P.C.B. altogether.
Step 9 : Remove Motor P.C.B., Bridge 1 P.C.B. & Position
Switch P.C.B. altogether.
39
9.13. Disassembly of Motor Assem-
bly
• Refer to "Disassembly of Motor P.C.B., Bridge 1 P.C.B. &
Position Switch P.C.B.”
Step 1 : Remove 3 screws.
Step 2 : Remove Driver Gear.
Step 3 : Remove Gear Fixture.
Step 4 : Remove Middle Gear.
40
Step 5 : Remove Belt.
Step 6 : Remove Belt Pulley.
Step 7 : Remove 2 screws.
Step 8 : Remove Motor.
Step 8 : Remove Motor.
9.14. Replacement of CD Door Orna-
ment
• Refer to "Disassembly of Stand Unit”
• Refer to "Disassembly of Net Frame Unit”
• Refer to "Disassembly of Front Cabinet unit”
• Refer to (Step 1) - (Step 7) of item 9.12.
• Refer to "Disassembly of Net Frame Unit”
• Refer to "Disassembly of Front Cabinet unit”
• Refer to (Step 1) - (Step 7) of item 9.12.
9.14.1. Disassembly of CD Door Ornament
Step 1 : Slightly push up the CD Door Ornament as arrow
shown using a screwdriver to releasing both catches.
Step 2 : Push the CD Door Ornament upwards.
shown using a screwdriver to releasing both catches.
Step 2 : Push the CD Door Ornament upwards.
Step 3 : Lift up to remove CD Door Ornament.
Click on the first or last page to see other SC-HC10EB / SC-HC10EG / SC-HC10EP service manuals if exist.