Panasonic SC-HC10EB / SC-HC10EG / SC-HC10EP Service Manual ▷ View online
49
9.19. Disassembly of Speaker P.C.B.
& Bridge 2 P.C.B.
• Refer to "Disassembly of Stand Unit”
• Refer to "Disassembly of Net Frame Unit”
• Refer to "Disassembly of Front Cabinet unit”
• Refer to (Step 2) & (Step 5) of item 9.18.
• Refer to "Disassembly of Net Frame Unit”
• Refer to "Disassembly of Front Cabinet unit”
• Refer to (Step 2) & (Step 5) of item 9.18.
Step 1 : Detach 4P connector (P906) at the connector (P2) on
Main P.C.B..
Main P.C.B..
Step 2 : Desolder P905 on the Speaker P.C.B..
Step 3 : Detach Bridge 2 P.C.B. and Speaker P.C.B..
Step 3 : Detach Bridge 2 P.C.B. and Speaker P.C.B..
Caution : During assembling of the Speaker unit, ensure
that the wire is dressed as shown in the diagram above.
50
9.20. Disassembly of Traverse Deck
• Refer to "Disassembly of Stand Unit”
• Refer to "Disassembly of Net Frame Unit”
• Refer to "Disassembly of Front Cabinet unit”
• Refer to "Disassembly of Net Frame Unit”
• Refer to "Disassembly of Front Cabinet unit”
Step 1 : Remove 1 screw.
Step 2 : Remove CD Mecha bracket as arrow shown.
Caution : Keep springs in the safe place and place them
Step 2 : Remove CD Mecha bracket as arrow shown.
Caution : Keep springs in the safe place and place them
back during assembling.
Step 3 : Remove 4 screws.
Step 4 : Detach 22P FFC at the connector (CN807) on Main
P.C.B..
Step 5 : Remove Traverse Deck.
Step 4 : Detach 22P FFC at the connector (CN807) on Main
P.C.B..
Step 5 : Remove Traverse Deck.
51
Caution : During assembling, ensure the CD Mecha
Bracket is properly slot into the rear cabinet unit.
9.21. Disassembly of Traverse Cover
• Refer to "Disassembly of Traverse Deck”
Step 1 : Release 3 catches.
Step 2 : Remove the Traverse Cover.
Step 2 : Remove the Traverse Cover.
Step 3 : Detach 25P FFC at the connector (CN7002) on the CD
Servo P.C.B..
Step 4 : Release both catches and push down the fixed pin as
arrow shown.
Servo P.C.B..
Step 4 : Release both catches and push down the fixed pin as
arrow shown.
52
Step 5 : Lift up the traverse unitto remove it.
9.22. Disassembly of CD Servo
P.C.B.
• Refer to "Disassembly of Traverse Deck”
Step 1 : Desolder the terminal.
Step 2 : Remove 3 screws.
Step 2 : Remove 3 screws.
Step 3 : Flip the CD Servo P.C.B. over to one side.
Step 4 : Detach FPC out from the connector.
Step 5 : Attach a short pin to the unit.
Caution : Insert a short pin into FPC of the optical pickup.
Step 4 : Detach FPC out from the connector.
Step 5 : Attach a short pin to the unit.
Caution : Insert a short pin into FPC of the optical pickup.
[See “Handling Precautions for traverse unit”]
Click on the first or last page to see other SC-HC10EB / SC-HC10EG / SC-HC10EP service manuals if exist.