Panasonic RR-XR800E / RR-XR800PC Service Manual ▷ View online
25
7 Disassembly and Assembly Instructions
Caution Note:
• This section describes the disassembly and/or assembly procedures for all major printed circuit boards & main compo-
nents for the unit. (You may refer to the section of “Main components and P.C.B Locations” as described in the service
manual)
manual)
• Before carrying out the disassembly process, please ensure all the safety precautions & procedures are followed.
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with
• During the disassembly and/or assembly process, please handle with care as there may be chassis components with
sharp edges.
• During disassembly and assembly, please ensure proper service tools, equipment or jigs is being used.
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the ser-
• During replacement of component parts, please refer to the section of “Replacement Parts List” as described in the ser-
vice manual.
• Select items from the following indexes when disassembly or replacement are required.
• Disassembly of Rear Cabinet Unit
• Replacement of Main P.C.B. Unit
• Replacement of Battery Terminal (+) & (-)
• Replacement of LCD Assembly
• Replacement of SW P.C.B.
• Replacement of Speaker Unit
• Replacement of Mic Ornament unit & LED Tip
• Replacement of Microphone Unit
• Disassembly of Rear Cabinet Unit
• Replacement of Main P.C.B. Unit
• Replacement of Battery Terminal (+) & (-)
• Replacement of LCD Assembly
• Replacement of SW P.C.B.
• Replacement of Speaker Unit
• Replacement of Mic Ornament unit & LED Tip
• Replacement of Microphone Unit
26
7.1.
Disassembly flow chart
The following chart is the procedure for disassembling the casing and inside parts for internal inspection when carrying out the ser-
vicing.
To assemble the unit, reverse the steps shown in the chart below.
vicing.
To assemble the unit, reverse the steps shown in the chart below.
7.2.
Main Parts Location Diagram
27
7.3.
Location of the Respective Parts
28
7.4.
Disassembly of Rear Cabinet
Unit
Unit
Step 1 : Remove 5 screws.
Step 2 : Lift up the Battery Cover.
Step 3 : Remove 2 screws.
Step 3 : Remove 2 screws.
Caution : During assembling ensure the screws is fix prop-
erly as shown.
erly as shown.
Step 4 : Press the Rear Cabinet Unit & gently push up the Rear
Cabinet Unit to release the 2 catches.
Caution : Do not apply strong force in releasing the Rear
Cabinet Unit to avoid damage of the catches.
Cabinet Unit to release the 2 catches.
Caution : Do not apply strong force in releasing the Rear
Cabinet Unit to avoid damage of the catches.
Click on the first or last page to see other RR-XR800E / RR-XR800PC service manuals if exist.