Panasonic WH-SDC09F3E8 / WH-SDC12F9E8 / WH-SDC14F9E8 / WH-SDC16F9E8 / WH-UD09FE8 / WH-UD12FE8 / WH-UD14FE8 / WH-UD16FE8 Service Manual ▷ View online
25
User
Shifting the water temperature
Desired temperature setting
This easily shifts the water outlet temperature if the setting is
undesirable.
1
s
s
e
r
P
to enter the water temperature shifting mode.
2
s
s
e
r
P
to change setting.
3
s
s
e
r
P
or
to set the desired temperature.
(temperature range: -5 °C ~ 5 °C)
Temperature setting
+5
-5
Shift value
<Water outlet
temperature>
<Outdoor ambient temperature>
4
s
s
e
r
P
to confirm the setting.
■
Note:
• Press
or wait for 30 seconds to exit the SETTING mode.
• The set temperature will be saved in the system once confirmed.
• The SETTING mode cannot be activated when the SERVICE and STATUS indicators are ON.
• The system will shift the temperature within water outlet temperature range.
• The SETTING mode cannot be activated when the SERVICE and STATUS indicators are ON.
• The system will shift the temperature within water outlet temperature range.
User
Holiday mode
• By setting the day (s) in holiday mode, it promotes energy saving
while you are on holiday, and enables the system to resume at the
preset temperature after your holiday.
• Ensure that the system is OFF before setting.
• The system will resume operation automatically at 00:00 am after
• The system will resume operation automatically at 00:00 am after
the holiday.
• The day the HOLIDAY mode was set is counted as day 1.
Desired days
Example:
Setting the holiday mode on June 21, 08:00 am. By setting 3 days,
the system resumes operation on June 24, 00:00 am.
1
s
s
e
r
P
to enter the HOLIDAY mode.
2
s
s
e
r
P
or
to set the desired days.
(Setting range: 1 day ~ 999 days)
3
s
s
e
r
P
to confirm the setting.
■
Note:
• Press
or wait 30 seconds to exit the HOLIDAY mode.
26
User
Weekly timer setting
Promotes energy saving by allowing you to set up to 6
programmes in any given day.
Indicates the next timer operation
programme
Day to be selected
Indicates the next timer
operation day
Programme number in a day
OFF Timer
ON Timer
Lights up if Timer operation is selected
1
s
s
e
r
P
to enter the timer setting mode.
2
s
s
e
r
P
or
to select your desired day.
3
s
s
e
r
P
to confirm your selection.
4
s
s
e
r
p
,
g
n
i
k
n
il
b
e
b
ll
i
w
”
1
“
to set
programme 1.
5 Press
to select ON or OFF timer.
6
s
s
e
r
P
or
to select your desired time.
You can set
,
,
and the Water
Temperature Thermo Shift setting.
7
s
s
e
r
P
to confirm programme 1. The selected
day will be highlighted with ▼.
• After 2 seconds, the display will move to the
• After 2 seconds, the display will move to the
next programme. Repeat steps 4 to 7 to set
programmes 2 to 6.
• During timer setup, if no button is pressed within
30 seconds, or if the
is pressed, the setting at
that moment is confirmed and timer setup is ended.
To check current timer programme
1
s
s
e
r
P
to enter timer mode and press
to enter day setting.
2
s
s
e
r
P
or
until your desired day is shown,
press
to confirm your selection.
3
s
s
e
r
P
or
to check the set programmes.
To modify current timer programme
or add new timer programme
or add new timer programme
1 Perform steps 1 to 7 of “Weekly timer
setting” to modify existing timer programme, or
add any timer programme.
add any timer programme.
To cancel current timer programme
1
s
s
e
r
P
to enter day.
2
s
s
e
r
P
or
until your desired day is shown,
press
to enter programme setting.
3
s
s
e
r
P
or
until your desired day is shown.
Press
to cancel the programme and ▼ will
disappear.
To disable/enable Weekly Timer
• To disable weekly timer setting, press
, then
press
.
• To enable previous weekly timer setting, press
,
then press .
Dealer
Operation/settings to be done only by the authorised dealer/specialist.
User
Operation/settings to be done by the authorised dealer/specialist or user.
■
Note:
• You may set the timer for each day of the week (Monday to Sunday) with 6 programmes per day.
• When the system is switched on by the timer, it will use the previously set temperature to control the water outlet
• When the system is switched on by the timer, it will use the previously set temperature to control the water outlet
temperature.
• The same timer programme cannot be set on the same day.
• You may also select 2 or more days with the same timer setting.
• You may also select 2 or more days with the same timer setting.
27
Dry Concrete Function
• During construction to dry the concrete under a preset temperature.
1
s
s
e
r
P
and
simultaneously and hold for 5 seconds until the display shows “
”.
2
s
s
e
r
P
.
(The display shows “
”).
3
s
s
e
r
P
to select day.
Press
or
to set the desired temperature.
4
s
s
e
r
P
to confirm the selection.
5
p
e
t
s
t
a
e
p
e
R
3 and 4 to set other days and temperature.
• Press
to exit.
28
4.1.4 Main Components
9
11
10
PCB
Control panel
Pressure relief valve
Flow switch
Pressure gauge
Water pump
1 phase RCCB/ELCB
Control panel
Pressure relief valve
Flow switch
Pressure gauge
Water pump
1 phase RCCB/ELCB
(Only applicable for
WH-S**09*3E8)
WH-S**09*3E8)
3 phase RCCB
3 phase RCCB
3 phase RCCB
Connector name
Water Outlet
Gas Refrigerant
Liquid Refrigerant
Water drainage
Water inlet
Gas Refrigerant
Liquid Refrigerant
Water drainage
Water inlet
(Only applicable
for WH-
S**12/14/16*9E8)
for WH-
S**12/14/16*9E8)
Cabinet front plate
Cabinet
Handle (2 pieces)
Overload protector
Cabinet
Handle (2 pieces)
Overload protector
(4 pieces)
Heater assembly
Expansion vessel
Bushing
Air purge valve
Expansion vessel
Bushing
Air purge valve
d
c
e
b
a
15
2
6
5
1
7
8
-1
8
-2
16
12
14
13
1
2
3
4
5
a
b
c
d
e
6
7
9
10
11
12
13
14
15
16
8-1
8-2
4
3
4.2 Outdoor
Unit
Air inlet (rear)
Air outlet
Air inlet (side)
Click on the first or last page to see other WH-SDC09F3E8 / WH-SDC12F9E8 / WH-SDC14F9E8 / WH-SDC16F9E8 / WH-UD09FE8 / WH-UD12FE8 / WH-UD14FE8 / WH-UD16FE8 service manuals if exist.