Panasonic CS-E9GFEW / CU-E9GFE / CS-E12GFEW / CU-E12GFE / CS-E18GFEW / CU-E18GFE Service Manual ▷ View online
69
c. Raise up the resin case, remove the shield plate.
d. Remove the connectors which connected to PCB.
(6 places)
Remove the Pipe Temperature Sensor from the heat
exchanger.
Remove the Pipe Temperature Sensor from the heat
exchanger.
e. Remove the Shield plate in the Control Board Casing.
Fig. 4
Fig. 5
Fig. 6
70
f. Remove the terminal cables from the PCB from the
Terminal Block (black, white, red)
Remove the green cable terminal that connected to
the ground terminal.
Remove the green cable terminal that connected to
the ground terminal.
g. Remove the screws (2 locations) at PCB and take out
the PCB.
4. Removal of Drain Pan Ass'y
Remove the screws in front of Drain Pan (2 locations) and
take out the Drain Pan.
take out the Drain Pan.
Fig. 7
Fig. 8
Fig. 9
71
5. Removal of Evaporator
Push the stoppers at left side of evaporator (2 locations)
to loosen the evaporator. At the right side of evaporator,
push the stoppers to loosen the evaporator and move the
evaporator to right side.
to loosen the evaporator. At the right side of evaporator,
push the stoppers to loosen the evaporator and move the
evaporator to right side.
6. Removal of Turbo Fan and Fan Motor
a. Remove the cover. (4 screws)
b. Use a spanner to loosen the fan fixed nut in anti-
clockwise, remove the fan.
c. Remove the Fan Motor screw (3 locations), remove
Fan Motor.
Fig. 10
Fig. 11
Fig. 12
72
12.2. Outdoor Unit
12.2.1.
CU-E9GFE CU-E12GFE
1. Remove the top panel and front panel
Fig. 13
2. Remove the Outdoor Electronic Controller
Fig. 15
Caution! When handling electronic controller, be
careful of electrostatic discharge.
Fig. 16
Fig. 14
Fig. 17
• Be save to return the wiring to its original position
• There are many high voltage components within the heat
• There are many high voltage components within the heat
sink cover so never touch the interior during operation.
Wait at least two minutes after power has been turned
off.
Wait at least two minutes after power has been turned
off.
Click on the first or last page to see other CS-E9GFEW / CU-E9GFE / CS-E12GFEW / CU-E12GFE / CS-E18GFEW / CU-E18GFE service manuals if exist.