LG TR1103AEP5 Service Manual ▷ View online
29
9) Other Useful Functions
• “ ” & the remaining time are alternatively shown on the display while they are locked.
• All buttons will be inactive whilst the child lock is engaged. The child lock cannot be activated when the
• All buttons will be inactive whilst the child lock is engaged. The child lock cannot be activated when the
unit is in the stand by mode.
NOTE
1
Press the POWER (AUTO OFF) button.
3
Press both the RINSE button and the SPIN button simultaneously.
2
Press the START/PAUSE button to start washing.
Child Lock Function
If you want to lock all the keys to prevent settings from being changed by a child, you can use the
child lock option.
child lock option.
If you want to unlock during wash, press both the RINSE and the SPIN button simultaneously again.
How to Lock
• Turn Power on.
• After all washing conditions are set according to the manual.
• During the wash program, all the buttons are locked until washing
is completed or until the child-lock function is deactivated
manually.
manually.
How to Unlock
30
3-6. CLEANING AND MAINTENANCE
Cleaning the Inside of your Washer
If you use fabric softener or do regular COLD water washing, it is very important that you occasionally clean
the inside of your washer.
the inside of your washer.
• Fill your washer with HOT water.
• Add about two cups of a powdered Detergent that contains phosphate.
• Let it operate for several minutes.
• Stop the washer, open the lid and leave it to soak overnight.
• After soaking, drain the washer and run it through a normal cycle without adding any detergent or clothes.
• Add about two cups of a powdered Detergent that contains phosphate.
• Let it operate for several minutes.
• Stop the washer, open the lid and leave it to soak overnight.
• After soaking, drain the washer and run it through a normal cycle without adding any detergent or clothes.
Or use TUB CLEAN PROGRAM periodically.
We do not recommend that you wash clothes during this procedure.
We do not recommend that you wash clothes during this procedure.
Products that might damage your washing machine
• Concentrated bleaches and diaper sanitizer will cause damage to the paintwork and components of your washer.
• Hydrocarbon solvents i.e. petrol, paint thinners and lacquer thinners, etc. can dissolve plastic and blister paint
• Hydrocarbon solvents i.e. petrol, paint thinners and lacquer thinners, etc. can dissolve plastic and blister paint
(Be careful when washing garments stained with these solvents as they are flammable DO NOT put them in
washer or dryer without presoaking and rinsing them first.)
washer or dryer without presoaking and rinsing them first.)
• Some pretreatment sprays or liquids can damage your washer’s control panel.
• Use of dyes in your washer may cause staining of the plastic components. The dye will not damage the machine
• Use of dyes in your washer may cause staining of the plastic components. The dye will not damage the machine
but we suggest you thoroughly clean your washer afterwards. We do not recommend the use of dye strippers in
your washer.
your washer.
• Do not use your washer lid as a work surface.
When there is a possibility of freezing ambient temperatures.
• Close the water taps and remove the Water Supply Hose.
• Remove the water which remains in the water supply.
• Lower the drain hose and drain the water in the bowl and the drain hose by spinning.
• Remove the water which remains in the water supply.
• Lower the drain hose and drain the water in the bowl and the drain hose by spinning.
If frozen
• Remove the water supply hose, and immerse it in HOT water at approx.. 40°C.
• Pour approx.. 2 liters of HOT water at approx.. 40°C, into the bowl and let it stand for 10 minutes.
• Connect the water supply hose to the water tap and confirm that the washing machine performs the
• Pour approx.. 2 liters of HOT water at approx.. 40°C, into the bowl and let it stand for 10 minutes.
• Connect the water supply hose to the water tap and confirm that the washing machine performs the
supply and drainage of water.
Wash Inner-tub
Leave the lid open after washing to allow moisture to evaporate. If you want to clean
the inner-tub use a clean soft cloth dampened with liquid Detergent, then rinse. (Do
not use harsh or gritty cleaners.)
the inner-tub use a clean soft cloth dampened with liquid Detergent, then rinse. (Do
not use harsh or gritty cleaners.)
Inlet Hoses
It is recommended to replace the inlet hoses to the tap every 5 years.
Exterior
Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with sharp
objects.
objects.
Long Vacations
Be sure water supply is shut off at the tap. Drain all water from hoses if weather will be
below freezing.
below freezing.
31
4. SERVICE INFORMATION
4-1. DISPLAY DIAGRAM
32
4-2. MAIN DIAGRAM
Click on the first or last page to see other TR1103AEP5 service manuals if exist.