DOWNLOAD LG TR1103AEP5 Service Manual ↓ Size: 4.18 MB | Pages: 58 in PDF or view online for FREE

• The pulsator rotates for

8 seconds to detect the
laundry load.

• Then the WATER

LEVEL and the amount
of Detergent to be
used will be shown and
water will be supplied.

• Water will be

supplied for 2
minutes after the
start of the wash to
supplement the
water the laundry
has absorbed.

• When the wash

program ends, the
buzzer will ring for
10 seconds before
the Power goes
off automatically.

• If water is already in the tub, or putting

wet laundry into the tub before starting will
increase the WATER LEVEL. 

• With lightweight bulky loads, WATER

LEVEL can be set low.  

• When setting the WATER LEVEL manually,

do not set to Medium to prevent damage to
laundry.

• Washing with HOT water may damage the

laundry (Water is set to cold automatically).
Ensure that the load is under 2kg.

• In order to avoid  damage to laundry, the

spin cycle may appear slow. This also
avoids wrinkles and clothing may still
contain some water. This is normal.

• When static pressure of water is more

than 2kg/cm

2

, the QUICK WASH course

will be within 19min.

Use this mode to wash normal clothes or thick and heavy clothes which are excessively dirty. 
SOAK mode can be used with FUZZY or JEAN or SILENT or FAVORITE program.

Press the POWER (AUTO OFF) button to turn power on.

Press the PROGRAM button to select the washing program.

Press the WASH button, to select SOAK program.

Add the Detergent. 

Add the laundry and press the START/PAUSE button.

• Keep pressing the WASH button until the light turns on

‘SOAK’ and ‘WASH’ simultaneously as next image.

• SOAK program only works when socking time is 40, 50 or

60 minutes. 

• Add the appropriate quantity of Detergent as the Detergent

manufacture instruction.

• The WATER LEVEL will be shown and water will be supplied.

Close the lid. 

Finish

• Water will be supplied for 2 minutes after the start of the wash to

supplement the absorbed water by the laundry. 

• When the wash program ends, the buzzer will ring for

10seconds before the Power goes off automatically.

• Order of Soak-Wash timing

• Select soaking time 40minutes, 50minutes, or 60minutes (including washing time) by pressing the Wash

button repeatedly.  

• If necessary, select the times of Rinse and the time for Spinning by pressing the Rinse or Spin buttons till

you reach the desired times. 

Soak-Wash

Pressing the FAVORITE button allows you to store your FAVORITE wash conditions in the normal cycle
memory and then recall it for use at a later time.

Press the POWER (AUTO OFF) button to turn power on.

Select the FAVORITE program.

Select your FAVORITE wash conditions.

• Press the WATER button to select WATER.
• Press the WASH button, the RINSE button & the SPIN

button to select wash time, rinse time & spin time 
respectively you want to store.

To recall your FAVORITE cycle.

1. Press POWER on.
2. Select the FAVORITE cycle by pressing the PROGRAM.
3. Press the START/PAUSE button. Then the wash cycle starts.

Press the START/PAUSE button to store & start your FAVORITE wash cycle.
Power turns off automatically after wash.

Use this program to wash quietly in SILENT especially during late night and dawn.

Press the POWER (AUTO OFF) button to turn power on.

Press the PROGRAM button to select SILENT program.

Add the laundry into the washing tub.

Add the Detergent and close the lid.

Press the START/PAUSE button.

• SILENT program takes longer washing time than FUZZY(Normal) program.

• To reduce noise in spinning, spin rpm is lower than normal spinning rpm. So the laundry has  more

moisture than normal.