DOWNLOAD LG JUPITERCUT Service Manual ↓ Size: 9.75 MB | Pages: 47 in PDF or view online for FREE

1. Disassemble top plate by unscrewing 2

screws on the rear of the dryer.

2. After pulling drawer assembly out and

unscrew 4 screws.

3. Disassemble control panel by

unscrewing 2 screws on the Rear of the
panel frame.

DRAWER

TOP PLATE

To reduce the risk of personal injury, adhere to all industry recommended safety procedures
including the use of long sleeved gloves and safety glasses.
Failure to follow all of the safety warnings in this manual could result in property damage,
personal injury or death.

5. Disassemble cabinet by unscrewing 2 at

the top and 3 at the rear (Left and right
are the same).

6. Disassemble panel frame by unscrewing

4 at the front.

4. Disassemble the lower cover by pulling

to the front.

2nd Pull

1st Pull

CABINET

DRAWER

PANEL FRAME

8-1. Disassemble the spring holder.

8-2. Releasing the belt on the pulley.

9-1. Disassemble the main PWB cover as

pulling the hook.

9-2. Pull out the harness from the housing.

① Pull the hook

②

 PULL

⑤

7-1. Disassemle the door by releasing the

2 screws.

7-2. Disassemble the door switch.

7-3. Disassemble the cabinet cover by

releasing the 10 screws.

7-4. Disassemble the Door Switch.

7-5. Disassemble the cover, cabinet.

CABINET COVER

DOOR

Pull

DOOR SWITCH

Pull

1

Pull the Hook

Push

1

2

2

If the hose is assembled unsuitable
“empty water” error message will be
indicated on the LED or LCD display.

11. Disassemble the housing of motor,

compressor, heater and thermistor.

12. Releasing the dispenser by unscrewing

1 screw.

10. Disassembling the side frame by releasing

4 screws 

DISPENSER

Heater thermistor (WH Small 2pin)

Heater housing (WH Big 2pin)

Motor housing (WH 3pin)

Compressor housing (BLUE 3pin)