LG F1236RDSG Service Manual ▷ View online
8
Before servicing ask troubles of customers
Check the adjustment(power supply is 110V a.c, remove the transit bolts....)
Check the troubles referring to the trouble shooting.
Decide service steps referring to disassembly instructions.
And then, service and repair.
After servicing, operate the appliance whether it works O K or NOT.
Check the adjustment(power supply is 110V a.c, remove the transit bolts....)
Check the troubles referring to the trouble shooting.
Decide service steps referring to disassembly instructions.
And then, service and repair.
After servicing, operate the appliance whether it works O K or NOT.
STANDARD INSTALLATION
The appliance should be installed as follows.
REMOVE THE TRANSIT
INSTALL THE APPLIANCE
ADJUST THE
BOLTS
ON FLAT AND FIRM SURFACE
LEVELING
Remove the transit bolts
(4EA: )with supplied spanner.
Keep the transit bolts and
spanner for future use.
Insert the 4 caps
provided into the hole
4. INSTALLATION
Turn the leveling feet to adjust the
appliance.
Turn clockwise to raise;
counterclockwise to lower.
HOW TO CONNECT INLET HOSE
Check that the rubber packing is inside of the
valve connector.
Connect the inlet hose firmly to prevent leak.
CONNECT DRAIN HOSE
CONNECT POWER PLUG
9
Make sure that the hose is not twisted.
The drain hose should be placed under 100cm from the floor.
Connect the power plug to the wall outlet.
Avoid connecting several electric devices,
It may be the cause of the fire.
Avoid submerging the end of the hose.
1
Preparation for
washing.
washing.
• Connect the power plug to
the outlet.
• Connect the inlet hose.
3
Press the Start/Pause
button.
button.
•
In case of Coloreds program.
6
Check the water heating.
•
Press the Temp. button and the
present temperature will be
displayed.
present temperature will be
displayed.
5
Check automatic reverse
turn.
turn.
4
Check the water supply.
•
Check if water is supplied
through the detergent dispenser.
through the detergent dispenser.
7
Check the drain and spin
functions.
functions.
•
Turn off Wash and Rinse after
pressing the Start/Pause button
and start the machine again.
•
Check drain and spin.
8
Power off and open the
door
door
9
Water removal.
•
If SVC is needed during check,
remove the remaining water by
pulling out the hose cap.
2
Press the POWER button.
•
Power off and then power on.
•
Check if the door can be
opende after 3 minutes.
•
Check if the drum rotates
clockwise and counterclockwise.
clockwise and counterclockwise.
10
TEST OPERATION
7
11
6. WIRING DIAGRAM
/
PROGRAM CHART
W
/
S
W
/
S
W
/
S
W
/
S
I
/
/
S
I
/
/
S
I
/
/
S
W
/
S
I
/
/
S
W
/
S
D
/
T
I
/
/
S
Click on the first or last page to see other F1236RDSG service manuals if exist.