DOWNLOAD LG F1236RDSG Service Manual ↓ Size: 5.35 MB | Pages: 44 in PDF or view online for FREE

5. OPERATION

• Rotate the Cycle

selector knob to select
the cycle designed for
different types of fabric
and soil levels.

• Use this button to Start/

Stop the washer.

• Use this button to turn the power 

On/Off.

• This display shows:

a) the estimated time remaining in the

cycle when operating.

b) an error code when an error has been

detected.

• Soak:  When you want to wash hard to remove stains, the laundry is

soaked in water for 60 minutes before the main wash cycle. 

• Pre Wash: Use this option for loads that need pretreatment. 

It adds 16 minutes prewash and drain.

• Main wash: This is the washing method for general laundry.

• Small wash: Select this when the amount of laundry is small.

• Short wash: Select this when you want to complete the wash quickly

irrelevant from the amount of laundry.

• Use this option to prevent unwanted use of the

washer. Press and hold the Wash and Rinse
button for 3 seconds to lock/unlock control. 

• When Child lock is set, CHILD LOCK lights

and all buttons are disabled except the Power
button. You can lock the washer while it is
operating.

• To change the Rinse Cycling, press the

Rinse button repeatedly through available
options.

• Select a water temperature based on the

type of load you are washing. 

• To change the spin speed, press the Spin

Speed button repeatedly to cycle through
available options.

• This option features upgraded

washing performance with low
energy and water
consumption.

• Dry programs selected by

rotating dry knob.

• [Normal – More – 30 – 60 – 90 –

120 – 150 – Low Temp. – Iron]
can be selected.] can be selected.

• Tub Clean : The Tub Clean cycle is specially

designed to remove a mildew and musty smell.

• Additional laundry: Use this when you are

opening or adding more laundry during the cycle. 

• These lights show which portion

of the cycle the washer is
operating.

• Allows the start of any cycle

to be delayed for 3~19
hours.

7-3.HOW TO KNOW THE WATER LEVEL FREQUENCY

Press the Rinse and Temp. button simultaneously.

ex) 241 : Water level frequency = 241

10

-1

kHz

=24.1 kHz

7-4.HOW TO KNOW TO TEMPERATURE OF EACH THERMISTOR

AT OPERATING CONDITION.

■ Thermister in tub : Press the [Water Temp.] button.
■ Thermister in dry duct : Press the [Turbo Steam] button.
■ Thermister in Steam Generator : Press the [Delay time+Water Temp.] button. 

7-1.BEFORE SVC CHECKING

Be careful of electric shock or disconnecting the parts while trouble shooting.

Voltage of each terminal is 220-240V~ and DC while applying an electric current.

7-2.QC TEST MODE.

Pressing  Rinse, and Temp. button simultaneously.

Press the Power        button, while the above condition.

Press the Start/Pause button as follows.

7. TROUBLE SHOOTING

The digits means water level frequency(10

-1

kHz) 

Number of times the

Start/Pause button is pressed

Check Point

Display Status

None

Turns on all lamps and locks the door.

1 time

Tumble clockwise 

rpm (42~50)

2 times

Low speed Spin.

rpm (55~65)

3 times

High speed Spin 

rpm (110~120)

4 times

Inlet valve for prewash turns on.

Water level frequency (25~65)

5 times

Inlet valve for main wash turns on.

Water level frequency (25~65)

6 times

Inlet valve for cold water turns on.

Water level frequency (25~65)

7 times

Inlet valve for steam water turns on.

Water level frequency (25~65)

8 times

Inlet valve for dry water turns on.

Water level frequency (25~65)

9 times

Tumble counterclockwise

pm (42~50)

10 times

Wash heater turns on for 3 sec.

Water temperature

11 times

Circulation pump turns on.

Water level frequency (25~65)

12 times

Drain pump turns on.

Water level frequency (25~65)

13 times

Dry heater turns on for 3 sec.

Water temperature

14 times

Water level Sensor for Steam

Water level frequency of TSG (0~255)

15 times

Steam Heater turns on for 1,2 sec.

TSG temperature

16 times

Power off and unlock the door.

Turn off all lamps.

7-5.ERROR DISPLAY.

If you press the Start/Pause button in error condition, any error except ‘

’ will disappear and the

machine will change into pause status.

In case of 

if the error is not resolved within 20 sec., and in case of other errors,

if the error is not resolved within 4 min., power will be turned off automatically and the error only will be
blinked. But in case of 

, power will not be turned off.

• Not reached to the water level(246)within 8

minutes after water supplied or not reached to

the preset water level within 25 minutes.

• Not fully drained within 10 minutes.

• Water is over flowing(over 8 level).

If              is displayed, drain pump operates to

drain water automatically.

• The sensor pressure switch is out of order.

• In case of operating the reservation function or

the other function with door opened. Close the

door, then the error display is resolved.

• The door switch is out of order.

• The appliance is tilted.

• Laundry is gatherd to one side.

• The THERMISTOR is out of order.

WATER INLET

ERROR

DRAIN ERROR

OVERFLOW

ERROR

SENSOR PRESSURE

S/W ERROR

DOOR OPEN

ERROR

IMBALANCE

ERROR

HEATING

ERROR