LG F1236RDSG Service Manual ▷ View online
36
Disassemble the cabinet cover.
Separate the pump hose, the bellows
and the circulation hose assembly from the
pump assembly.
pump assembly.
Disassemble the pump assembly in arrow
direction.
Disassemble the cabinet cover.
Separate 2 connectors from the heater.
Loosen 2 nuts and pull out the heater.
CAUTION
• When assembling the heater, insert the
heater into the heater clip on the bottom of
the tub.
the tub.
• Tighten the fastening nut so the heater is
secure.
37
Disassemble the cabinet cover.
Separate the heater from the tub.
Remove any foreign objects (wire, coin, etc.) by
inserting a long bar in the opening.
Disassemble the back cover.
Remove the bolt.
Pull out the Rotor.
Unscrew the 2 screws from the tub bracket.
Remove the 6 bolts on the stator.
Unplug the 2 connectors from the stator.
Disassemble the damper hinges from the tub
and base.
Separate the dampers.
NOTE
• Before removing the hinge, press the hook.
And then replace the damper with new one.
38
To check out the fault diagnosis of TSG, in case
of removing the water inside, you can pull out
the plug and let the water drain away.
the plug and let the water drain away.
Be cautious in case of the TSG is hot
temperature.
temperature.
Remove the housing conpled with the TSG
(Heater, Water level frequency-sensor,
Thermistor)
(Heater, Water level frequency-sensor,
Thermistor)
Unscrew out the screw of the TSG and Body
Frame.
Frame.
39
Taking out the screws of Body Frame (4EA)
Separate the hoses from the TSG.
Remove the Body Frame and then, separate the
TSG from the washer
Click on the first or last page to see other F1236RDSG service manuals if exist.