LG F1236RDSG Service Manual ▷ View online
32
Disassemble the top plate assembly.
Pull out the drawer.
Push out the DISPENSER ASSEMBLY
after unscrew 2 screws.
Unscrew the nut at the lower part of the
dispenser.
dispenser.
Disassemble the 4 or 5 connectors from
the valves.
the valves.
Unscrew 1 screw from the top bracket.
Disassemble 2 connectors.
White Housing(BK-WH/BK)
Red Housing(BK-VI/BK)
Blue Housing(BK-YL/BK)
Blue Housing(BK-GY/BK)
Unscrew 2 or 4 screws from the back of
the cabinet.
the cabinet.
33
Unscrew the 4 screws from upper of the canbinet
cover.
Unscrew the screw from filter cover.
Put a flat ( - ) screwdriver or putty knife into the both
sides of the filter cover, and pull it out.
Unscrew the screw from the lower side of the cabinet
cover.
Disassemble the top plate assembly.
Pull out the drawer.
Push out the DISPENSER ASSEMBLY after
unscrew 2 screws.
Unscrew the 5 screws from the back of the DECO
PANEL.
PANEL.
Pull out the CONTROL PANEL
34
Open the door.
Disassemble the clamp assembly.
Tilt the cabinet cover.
Disconnect the door switch connector.
NOTE: When assembling the CABINET
COVER, connect the connector.
Lift and separate the cabinet cover.
35
Open the door.
Remove the two screws from the Hinge.
When removing the Door Assembly, it is necessary
to hold the Bracket that is inner of the cabinet cover.
Open the door and disassemble the CLAMP
ASSEMBLY.
Unscrew the 2 screws.
Be careful! The door is heavy.
NOTE
• Reconnect the connector after replacing the
DOOR SWITCH ASSEMBLY.
Click on the first or last page to see other F1236RDSG service manuals if exist.