JBL RADIAL (serv.man5) EMC - CB Certificate ▷ View online
Page 20 of 49
Report No. 152949
IEC
60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1B
3.2
Connection to a mains supply
N/A
3.2.1
Means of connection
Class III equipment. Unit is
not intended for direct
connection to a mains supply.
not intended for direct
connection to a mains supply.
N/A
3.2.1.1
Connection to an a.c. mains supply
N/A
3.2.1.2
Connection to a d.c. mains supply
N/A
3.2.2 Multiple
supply connections
N/A
3.2.3
Permanently connected equipment
N/A
Number of conductors, diameter of cable and
conduits (mm) ....................................................... :
conduits (mm) ....................................................... :
⎯
3.2.4 Appliance
inlets
N/A
3.2.5
Power supply cords
N/A
3.2.5.1
AC power supply cords
N/A
Type
......................................................................
:
⎯
Rated current (A), cross-sectional area (mm
2
),
AWG ..................................................................... :
⎯
3.2.5.2
DC power supply cords
N/A
3.2.6
Cord anchorages and strain relief
N/A
Mass of equipment (kg), pull (N) ......................... :
⎯
Longitudinal
displacement
(mm)
...........................
:
⎯
3.2.7 Protection
against
mechanical
damage
N/A
3.2.8 Cord
guards
N/A
Diameter or minor dimension D (mm); test mass (g)
............................................................................... :
............................................................................... :
⎯
Radius of curvature of cord (mm) .......................... :
⎯
3.2.9 Supply
wiring
space
N/A
3.3
Wiring terminals for connection of external conductors
N/A
3.3.1
Wiring terminals
Class III equipment. Unit is
not intended for direct
connection to a mains supply.
not intended for direct
connection to a mains supply.
N/A
3.3.2
Connection of non-detachable power supply cords
N/A
3.3.3 Screw
terminals
N/A
3.3.4
Conductor sizes to be connected
N/A
Page 21 of 49
Report No. 152949
IEC
60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1B
Rated current (A), cord/cable type, cross-sectional
area (mm
area (mm
2
) ............................................................. :
⎯
3.3.5
Wiring terminal sizes
N/A
Rated current (A), type, nominal thread diameter
(mm) ..................................................................... :
(mm) ..................................................................... :
⎯
3.3.6
Wiring terminal design
N/A
3.3.7
Grouping of wiring terminals
N/A
3.3.8 Stranded
wire
N/A
3.4 Disconnection
from the mains supply
N/A
3.4.1
General requirement
Class III equipment. Unit is
not intended for direct
connection to a mains supply.
not intended for direct
connection to a mains supply.
N/A
3.4.2 Disconnect
devices
N/A
3.4.3
Permanently connected equipment
N/A
3.4.4
Parts which remain energized
N/A
3.4.5 Switches
in
flexible cords
N/A
3.4.6
Number of poles - single-phase and d.c. equipment
N/A
3.4.7
Number of poles - three-phase equipment
N/A
3.4.8
Switches as disconnect devices
N/A
3.4.9
Plugs as disconnect devices
N/A
3.4.10 Interconnected
equipment
N/A
3.4.11 Multiple
power sources
N/A
3.5 Interconnection of equipment
P
3.5.1 General
requirements
Considered.
P
3.5.2
Types of interconnection circuits .......................... :
SELV circuit.
P
3.5.3
ELV circuits as interconnection circuits
No ELV interconnections.
N/A
3.5.4
Data ports for additional equipment
Class III equipment powered
by an external Limited Power
Source.
by an external Limited Power
Source.
P
4 PHYSICAL
REQUIREMENTS
P
4.1 Stability
P
Angle of 10
°
Unit does not overbalance at
10°.
10°.
P
Page 22 of 49
Report No. 152949
IEC
60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1B
Test force (N) ........................................................ : The unit is not floor standing.
N/A
4.2 Mechanical
strength
N/A
4.2.1
General
Class III equipment, powered
from a SELV LPS source. No
shock or energy hazards, no
test considered necessary.
from a SELV LPS source. No
shock or energy hazards, no
test considered necessary.
N/A
Rack-mounted equipment.
N/A
4.2.2
Steady force test, 10 N
N/A
4.2.3
Steady force test, 30 N
N/A
4.2.4
Steady force test, 250 N
N/A
4.2.5 Impact
test
N/A
Fall
test
N/A
Swing
test
N/A
4.2.6
Drop test; height (mm) .......................................... :
N/A
4.2.7 Stress
relief
test
N/A
4.2.8
Cathode ray tubes
No cathode ray tubes.
N/A
Picture tube separately certified ............................ :
N/A
4.2.9
High pressure lamps
N/A
4.2.10
Wall or ceiling mounted equipment; force (N) ....... : Not intended for wall or
ceiling mounting.
N/A
4.2.11
Rotating solid media
No rotating solid media.
N/A
Test to cover on the door…………………………….:
N/A
4.3
Design and construction
P
4.3.1
Edges and corners
No edges and corners
affecting safety.
affecting safety.
P
4.3.2
Handles and manual controls; force (N) ............. :
No knobs, grips, handles,
levers etc.
levers etc.
N/A
4.3.3
Adjustable controls
No hazardous adjustable
controls.
controls.
N/A
4.3.4
Securing of parts
No hazards associated with
loosening parts.
loosening parts.
N/A
4.3.5
Connection by plugs and sockets
SELV connectors do not
comply with IEC 60320 or IEC
60083.
comply with IEC 60320 or IEC
60083.
N/A
4.3.6
Direct plug-in equipment
Not intended to plug directly
into a wall socket-outlet.
into a wall socket-outlet.
N/A
Page 23 of 49
Report No. 152949
IEC
60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. IEC60950_1B
Torque
..................................................................
:
⎯
Compliance with the relevant mains plug standard ..
N/A
4.3.7
Heating elements in earthed equipment
No heating elements
provided.
provided.
N/A
4.3.8
Batteries
No batteries in the equipment.
N/A
- Overcharging of a rechargeable battery
N/A
- Unintentional charging of a non-rechargeable
battery
battery
N/A
- Reverse charging of a rechargeable battery
N/A
- Excessive discharging rate for any battery
N/A
4.3.9
Oil and grease
Insulation is not exposed to
oil, grease etc.
oil, grease etc.
N/A
4.3.10
Dust, powders, liquids and gases
The equipment does not
generate ionizing radiation or
use a laser, and does not
contain flammable liquids or
gases.
generate ionizing radiation or
use a laser, and does not
contain flammable liquids or
gases.
N/A
4.3.11
Containers for liquids or gases
No containers for liquids or
gases in the equipment.
gases in the equipment.
N/A
4.3.12
Flammable liquids ................................................ :
The equipment does not
contain flammable liquid.
contain flammable liquid.
N/A
Quantity of liquid (l) .............................................. :
N/A
Flash point (
°C) .................................................... : N/A
4.3.13
Radiation
The equipment does not
generate ionizing radiation or
use a laser, and does not
contain flammable liquids or
gases. LED is diffused type.
generate ionizing radiation or
use a laser, and does not
contain flammable liquids or
gases. LED is diffused type.
N/A
4.3.13.1 General
N/A
4.3.13.2 Ionizing
radiation
N/A
Measured radiation (pA/kg) ................................ :
⎯
Measured high-voltage (kV) ................................ :
⎯
Measured focus voltage (kV) .............................. :
⎯
CRT markings ..................................................... :
⎯
4.3.13.3
Effect of ultraviolet (UV) radiation on materials
N/A
Part, property, retention after test, flammability
classification ......................................................... :
classification ......................................................... :
N/A
4.3.13.4
Human exposure to ultraviolet (UV) radiation ...... :
N/A
Click on the first or last page to see other RADIAL (serv.man5) service manuals if exist.