JBL ON STAGE (serv.man3) EMC - CB Certificate ▷ View online
APPENDIX
EN 60950:2000
- Page 2 of 10 -
Order No. 23171
1.7.2 A
(DK)
Supply cords of Class I equipment, which is
delivered witho ut a plug, must be provided with a
visible tag with the following text:
“Vigtigt! Lederen med grøn/gul isolation må kun
visible tag with the following text:
“Vigtigt! Lederen med grøn/gul isolation må kun
tilsluttes en klemme mærket
eller
“
(IEC 60417, No 5019 eller IEC 60417, No. 5017)
If essential for the safety of the equipment, the tag
must in addition be provided with a diagram,
which shows the connection of the other
conductors, or be provided with the following text:
"For tilslutning af de øvrige ledere, se
medfølgende installationsvejledning"
Class III equipment.
N
1.7.5 S
(DK)
Socket-outlets for providing power to other
equipment shall be in accordance with the Heavy
Current Regulations, Section 107 -2-D1, Standard
Sheet DK 1-3a, DK 1-5a or DK 1-7a, when used
on Class I equipment
Current Regulations, Section 107 -2-D1, Standard
Sheet DK 1-3a, DK 1-5a or DK 1-7a, when used
on Class I equipment
There are no socket outlets providing
mains power to other appliances.
mains power to other appliances.
N
1.7.5 A
(DK)
Class II equipment shall not be fitted with
socket-outlets for providing power to other
equipment
equipment
Class III equipment.
N
1.7.12 A
(DE)
(Gesetz über techische Arbeitsmittel
(Gerätesicherheitsgesetz) [Law on technical
labour equipment {Equipment safety law}], of 23
labour equipment {Equipment safety law}], of 23
rd
October 1992, Article 3, 3
rd
paragraph 2
nd
sentence, together with the "Allgemeine
Verwaltungsvorschrift zur Durchfürung des
Zweiten Abschnitts des
Gerätesicherheitsgesetzes“ [General
administrative regulation on the execution of the
Second Section of the Equipment safety law], of
10
Verwaltungsvorschrift zur Durchfürung des
Zweiten Abschnitts des
Gerätesicherheitsgesetzes“ [General
administrative regulation on the execution of the
Second Section of the Equipment safety law], of
10
th
January 1996, article 2, 4
th
paragraph item 2)
Directions for use with rules to prevent certain
hazards for (among others) maintenance of the
technical labour equipment, also for imported
technical labour equipment shall be written in the
German language.
hazards for (among others) maintenance of the
technical labour equipment, also for imported
technical labour equipment shall be written in the
German language.
NOTE: Of this requirement, rules for use even
only by service personnel are not exempted.
only by service personnel are not exempted.
Must be considered before marketed in
Germany.
Germany.
—
1.7.15 A
(CH)
(Ordinance on environmentally hazardous
substances SR 814.013) Annex 4.10 of SR
814.013 applies for batteries
814.013 applies for batteries
There is no battery containing Cd or Hg in
the equipment.
the equipment.
N
1.7.15 F
(ALL)
Warning texts for lithium batteries
Languages:
No batteries provided.
N
2.2.4 S
(NO)
Requirements according to this Appendix,
1.7.2 and 6.1.2.1 apply
No TNV circuits.
N
2.3.2 S
(NO)
Requirements according to this Appendix,
6.1.2.1 apply
No TNV circuits.
N
2.3.3 S
(NO)
Requirements according to this Appendix,
6.1.2.1 apply
No TNV circuits.
N
APPENDIX
EN 60950:2000
- Page 3 of 10 -
Order No. 23171
2.3.4 S
(NO)
Requirements according to this Appendix,
1.7.2 and 6.1.2.1 apply
No TNV circuits.
N
2.7.1 C
Replace the Sub-clause as follows:
Basic requirements
To protect against excessive current, short-circuits
and earth faults in primary circuits, protective
devices shall be included either as integral parts
of the equipment or as parts of the building
installation, subject to the following a), b) and c):
a) Except as detailed in b) and c), protective
Basic requirements
To protect against excessive current, short-circuits
and earth faults in primary circuits, protective
devices shall be included either as integral parts
of the equipment or as parts of the building
installation, subject to the following a), b) and c):
a) Except as detailed in b) and c), protective
devices necessary to comply with the
requirements of 5.3 shall be included as
integral parts of the equipment.
requirements of 5.3 shall be included as
integral parts of the equipment.
b) For components in series with the mains input
to the equipment such as the supply cord,
appliance coupler, r.f.i. filter and switch, short
circuit and earth fault protection may be
provided by protective devices in the building
installation.
appliance coupler, r.f.i. filter and switch, short
circuit and earth fault protection may be
provided by protective devices in the building
installation.
c) It is permitted for Pluggable Equipment type B
or Permanently Connected Equipment, to rely
on dedicated overcurrent and short circuit
protection in the building installation, provided
that the means of protection, e.g. fuses or
circuit breakers, is fully specified in the
installation instruction.
on dedicated overcurrent and short circuit
protection in the building installation, provided
that the means of protection, e.g. fuses or
circuit breakers, is fully specified in the
installation instruction.
If reliance is placed on protection in the
building installation, the installation instructions
shall so state, except that for pluggable
equipment type A the building installation shall
be regarded as providing protection in
accordance with the rating of the wall socket
outlet.
building installation, the installation instructions
shall so state, except that for pluggable
equipment type A the building installation shall
be regarded as providing protection in
accordance with the rating of the wall socket
outlet.
Class III equipment.
N
2.7.2 C
This sub -clause has been declared: Void
Considered.
—
2.10.3.1 S
(NO)
Due to the IT power distribution systems
used, the a.c. mains supply voltage is considered
to be equal to the line -to-line voltage, and will
remain at 230V in case of a single earth fault
to be equal to the line -to-line voltage, and will
remain at 230V in case of a single earth fault
Considered.
N
APPENDIX
EN 60950:2000
- Page 4 of 10 -
Order No. 23171
3.2.1 S
(CH)
Supply cords of equipment having a rated
current not exceeding 10A shall be provided with
a plug complying with SEV 1011 or IEC 60884-1
and one of the following dimension sheets:
- SEV 6532-2.1991 Plug type 15, 3P+N+PE
250/400V, 10A
- SEV 6533-2.1991 Plug type 11, L+N
250V, 10A
- SEV 6534-2.1991 Plug type 12, L+N+PE
250V, 10A
In general, EN 60 309 applies for plugs for
currents exceeding 10A. However, a 16A plug and
socket-outlet system is being introduced in
Switzerland, the plugs of which are according to
the following dimension sheets, published in
February 1998:
- SEV 5932-2:1998 Plug type 25, 3L+N+PE
230/400V, 16A
- SEV 5933-2:1998 Plug type 21, L+N+PE
250V, 16A
- SEV 5934-2:1998 Plug type 23, L+N+PE
250V, 16A
a plug complying with SEV 1011 or IEC 60884-1
and one of the following dimension sheets:
- SEV 6532-2.1991 Plug type 15, 3P+N+PE
250/400V, 10A
- SEV 6533-2.1991 Plug type 11, L+N
250V, 10A
- SEV 6534-2.1991 Plug type 12, L+N+PE
250V, 10A
In general, EN 60 309 applies for plugs for
currents exceeding 10A. However, a 16A plug and
socket-outlet system is being introduced in
Switzerland, the plugs of which are according to
the following dimension sheets, published in
February 1998:
- SEV 5932-2:1998 Plug type 25, 3L+N+PE
230/400V, 16A
- SEV 5933-2:1998 Plug type 21, L+N+PE
250V, 16A
- SEV 5934-2:1998 Plug type 23, L+N+PE
250V, 16A
Class III equipment.
N
3.2.1 S
(DK)
Supply cords of single-phase equipment
having a rated current not exceeding 10 A shall be
provided with a plug according to the Heavy
Current Regulations Section 107-2-D1
provided with a plug according to the Heavy
Current Regulations Section 107-2-D1
Class I equipment provided with socket-outlets
with earth contacts or which are intended to be
used in locations where protection aga inst indirect
contact is required according to the wiring rules,
shall be provided with a plug in accordance with
standard sheet DK 2-1a or DK 2-5a
with earth contacts or which are intended to be
used in locations where protection aga inst indirect
contact is required according to the wiring rules,
shall be provided with a plug in accordance with
standard sheet DK 2-1a or DK 2-5a
If poly-phase equipment and single-phase
equipment having a rated current exceeding 10A
is provided with a supply cord with a plug, this
plug shall be in accordance with the Heavy
Current Regulations Section 107-1-D1 or
EN 60 309-2
equipment having a rated current exceeding 10A
is provided with a supply cord with a plug, this
plug shall be in accordance with the Heavy
Current Regulations Section 107-1-D1 or
EN 60 309-2
Class III equipment.
N
APPENDIX
EN 60950:2000
- Page 5 of 10 -
Order No. 23171
3.2.1 S
(ES)
Supply cords of single-phase equipment
having a rated current not exceeding 10A shall be
provided with a plug according to UNE
20315:1994
provided with a plug according to UNE
20315:1994
Supply cords of single -phase equipment having a
rated current not exceeding 2.5A shall be
provided with a plug according to UNE -EN
50075:1993
rated current not exceeding 2.5A shall be
provided with a plug according to UNE -EN
50075:1993
Class I equipment provided with socket-outlets
with earth contacts or which are intended to be
used in locations where protection against indirect
contact is required according to the wiring rules,
shall be provided with a plug in accordance with
standard UNE 20315:1994
with earth contacts or which are intended to be
used in locations where protection against indirect
contact is required according to the wiring rules,
shall be provided with a plug in accordance with
standard UNE 20315:1994
If poly-phase equipment is provided with a supply
cord with a plug, this plug shall be in accordance
with UNE-EN 60309-2
cord with a plug, this plug shall be in accordance
with UNE-EN 60309-2
Class III equipment.
N
3.2.1 S
(GB)
Apparatus which is fitted with a flexible cable
or cord and is designed to be connected to a
mains socket conforming to BS 1363 by means of
that flexible cable or cord and plug, shall be fitted
with a “standard plug” in accordance with
Statutory Instrument 1768 :1994 - The Plugs and
Sockets etc. (Safety) Regulations 1994, unless
exempted by those regulations.
NOTE: “standard plug” is defined in SI 1768:1994
and essentially means an approved plug
conforming to BS 1363 or an approved conversion
plug.
mains socket conforming to BS 1363 by means of
that flexible cable or cord and plug, shall be fitted
with a “standard plug” in accordance with
Statutory Instrument 1768 :1994 - The Plugs and
Sockets etc. (Safety) Regulations 1994, unless
exempted by those regulations.
NOTE: “standard plug” is defined in SI 1768:1994
and essentially means an approved plug
conforming to BS 1363 or an approved conversion
plug.
Class III equipment.
N
3.2.1 S
(IE)
Apparatus which is fitted with a flexible cable
or cord and is designed to be connected to a
mains socket conforming to I.S. 411 by means of
that flexible cable or cord and plug shall be fitted
with a 13A plug in accordance with Statutory
Instrument 525 :1997 – National Standards
Authority of Ireland (section 28) (13A Plugs and
Conversions Adaptors for Domestic Use)
Regulations 1997
mains socket conforming to I.S. 411 by means of
that flexible cable or cord and plug shall be fitted
with a 13A plug in accordance with Statutory
Instrument 525 :1997 – National Standards
Authority of Ireland (section 28) (13A Plugs and
Conversions Adaptors for Domestic Use)
Regulations 1997
Class III equipment.
N
3.2.3 C
Delete the NOTE 1 and in table 3A, delete the
conduit sizes in parentheses
conduit sizes in parentheses
Considered.
N
3.2.5 C
Replace
"60245 IEC 53" by "H05 RR-F"
"60227 IEC 52" by "H03 VV-F or H03 VVH2 -F"
"60227 IEC 53" by "H05 VV-F or H05 VVH2 -F2"
In table 3B, replace the first four lines by the
following:
Up to and including 6 0.75
"60245 IEC 53" by "H05 RR-F"
"60227 IEC 52" by "H03 VV-F or H03 VVH2 -F"
"60227 IEC 53" by "H05 VV-F or H05 VVH2 -F2"
In table 3B, replace the first four lines by the
following:
Up to and including 6 0.75
1)
Over 6 up to and including 10 (0.75)
2)
1.0
Over 10 up to and including 16 (1.0)
3)
1.5
In the Conditions applicable to table 3B, delete the
words "in some countries" in condition 1).
In NOTE 1, delete the second sentence.
words "in some countries" in condition 1).
In NOTE 1, delete the second sentence.
Considered.
N
Click on the first or last page to see other ON STAGE (serv.man3) service manuals if exist.