JBL ON STAGE 400P (serv.man4) EMC - CB Certificate ▷ View online
- Page 5 of 53 -
Report
No.
100711
TRF No. IECEN60950_1C
Copy of marking plate:
- Page 6 of 53 -
Report
No.
100711
TRF No. IECEN60950_1C
List of attachments:
Main test report (53 pages)
Photos (4 pages)
Australian differences (8 pages)
Canadian differences (5 pages)
Chinese differences (1 pages)
Israeli differences (1 pages)
Japanese differences (7 pages)
Korean differences (1 pages)
Singapore differences (2 pages)
US differences (5 pages)
Photos (4 pages)
Australian differences (8 pages)
Canadian differences (5 pages)
Chinese differences (1 pages)
Israeli differences (1 pages)
Japanese differences (7 pages)
Korean differences (1 pages)
Singapore differences (2 pages)
US differences (5 pages)
- Page 7 of 53 -
Report
No.
100711
TRF No. IECEN60950_1C
Test item particulars
.................................................. :
Equipment mobility .................................................... : [X] movable [] hand-held [] transportable
[] stationary [] for building-in [] direct plug-in
Connection to the mains ........................................... : [] pluggable equipment [] type A [] type B
[] permanent connection
[] detachable power supply cord
[] non-detachable power supply cord
[X] not directly connected to the mains
[] detachable power supply cord
[] non-detachable power supply cord
[X] not directly connected to the mains
Operating condition ................................................... : [X] continuous
[] rated operating / resting time:
Access location ........................................................ : [X] operator accessible
[] restricted access location
Over voltage category (OVC) ................................... : [] OVC I [] OVC II [] OVC III [] OVC IV
[] other:
Mains supply tolerance (%) or absolute mains supply
values ....................................................................... :
values ....................................................................... :
N/A
Tested for IT power systems .................................... : [] Yes [] No
IT testing, phase-phase voltage (V) ......................... :
IT testing, phase-phase voltage (V) ......................... :
N/A
Class of equipment ................................................... : [] Class I [] Class II [X] Class III
[] Not classified
Considered current rating (A) ................................... :
2.3A
Pollution degree (PD) ............................................... : [] PD 1 [X] PD 2 [] PD 3
IP protection class .................................................... : IP 20
Altitude during operation (m) .................................... :
Altitude of test laboratory (m) ................................... :
Mass of equipment (kg) ............................................ :
IP protection class .................................................... : IP 20
Altitude during operation (m) .................................... :
Altitude of test laboratory (m) ................................... :
Mass of equipment (kg) ............................................ :
1.8kg
Dimensions: 230mm x 360mm x 110mm
Dimensions: 230mm x 360mm x 110mm
Possible test case verdicts:
- test case does not apply to the test object .................: N/A
- test object does meet the requirement.......................: P (Pass)
- test object does not meet the requirement.................: F (Fail)
Testing
..........................................................................:
Date of receipt of test item ............................................:
February 2008
Date(s) of performance of tests ....................................:
February 2008
- Page 8 of 53 -
Report
No.
100711
TRF No. IECEN60950_1C
General remarks:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory.
"(See Enclosure #)" refers to additional information appended to the report.
"(See appended table)" refers to a table appended to the report.
This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory.
"(See Enclosure #)" refers to additional information appended to the report.
"(See appended table)" refers to a table appended to the report.
Note: This TRF includes EN Group Differences together with National Differences and Special
National Conditions, if any. All Differences are located in the Appendix to the main body of this TRF.
National Conditions, if any. All Differences are located in the Appendix to the main body of this TRF.
Throughout this report a comma (point) is used as the decimal separator.
General product information:
The EUT is a computer stereo system powered by an external SELV source. The EUT is provided with an
Ipod connection, USB and an auxiliary audio input connection.
Maximum recommended ambient (Tmra): 40°C
Connection to the supply: Not connected to mains supply.
Ipod connection, USB and an auxiliary audio input connection.
Maximum recommended ambient (Tmra): 40°C
Connection to the supply: Not connected to mains supply.
Normal operation condition: Normal operation is considered 1/8th of maximum undistorted power and the
Ipod 5V charge output is fully loaded to its max output power (1.5W). Non-clipping was determined using a 1
KHz sinusoidal signal input. For maximum normal operation, 1/8th of the non-clipping amplitude was used
with a filtered pink noise input signal.
1.1.2 - Additional requirements:
Exposure to extreme temperatures, excessive dust, moisture or vibration; to flammable gases; to corrosive
or explosive atmospheres:
This equipment is intended to operate in a "normal" environment (Offices and homes).
Electromedical equipment connected to the patient:
This equipment is not an electromedical equipment intended to be physically connected to a patient.
Ipod 5V charge output is fully loaded to its max output power (1.5W). Non-clipping was determined using a 1
KHz sinusoidal signal input. For maximum normal operation, 1/8th of the non-clipping amplitude was used
with a filtered pink noise input signal.
1.1.2 - Additional requirements:
Exposure to extreme temperatures, excessive dust, moisture or vibration; to flammable gases; to corrosive
or explosive atmospheres:
This equipment is intended to operate in a "normal" environment (Offices and homes).
Electromedical equipment connected to the patient:
This equipment is not an electromedical equipment intended to be physically connected to a patient.
Equipment used in vehicles, ships or aircrafts, in tropical countries, or at elevations > 2000m:
This equipment is intended to operate in a "normal" environment (Offices and homes).
Click on the first or last page to see other ON STAGE 400P (serv.man4) service manuals if exist.