JBL ON BEAT MICRO (serv.man3) EMC - CB Certificate ▷ View online
Issue Date:
2012-10-23
Page 5 of 50
Report Reference #
E204594-A37-CB-1
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
Copy of Marking Plate
The artwork below may be only a draft. The use of certification marks on a product must be authorized by
the respective NCBs that own these marks.
the respective NCBs that own these marks.
Issue Date:
2012-10-23
Page 6 of 50
Report Reference #
E204594-A37-CB-1
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
Test item particulars :
Equipment mobility ...............................................:
movable
Connection to the mains ......................................:
Not directly connect to mains
Operating condition ..............................................:
continuous
Access location ....................................................:
operator accessible
Over voltage category (OVC) ..............................:
OVC II
Mains supply tolerance (%) or absolute mains supply
values ...................................................................:
values ...................................................................:
N/A
Tested for IT power systems ...............................:
No
IT testing, phase-phase voltage (V) .....................:
N/A
Class of equipment ..............................................:
Class III (supplied by SELV)
Considered current rating of protective device as part
of the building installation (A) ...............................:
of the building installation (A) ...............................:
20
Pollution degree (PD) ...........................................:
PD 2
IP protection class ................................................:
IP X0
Altitude of operation (m) .......................................:
Up to 2000
Altitude of test laboratory (m) ...............................:
Less than 2000
Mass of equipment (kg) .......................................:
0.56
Possible test case verdicts:
- test case does not apply to the test object ........... : N / A
- test object does meet the requirement ................. : P(Pass)
- test object does not meet the requirement ........... : F(Fail)
Testing:
Date(s) of receipt of test item ...............................:
2012-10-09
Date(s) of Performance of tests ...........................:
2012-10-12 to 2012-10-17
General remarks:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the testing laboratory.
"(see Enclosure #)" refers to additional information appended to the report.
"(see appended table)" refers to a table appended to the report.
Throughout this report a point is used as the decimal separator.
This report shall not be reproduced, except in full, without the written approval of the testing laboratory.
"(see Enclosure #)" refers to additional information appended to the report.
"(see appended table)" refers to a table appended to the report.
Throughout this report a point is used as the decimal separator.
Manufacturer's Declaration per Sub Clause 6.25 of IECEE 02:
The application for obtaining a CB Test Certificate includes more than one factory and a
declaration form the Manufacturer stating that the sample(s) submitted for evaluation is (are)
representative of the products from each factory has been provided ......
When differences exist, they shall be identified in the General Product Information section.
The application for obtaining a CB Test Certificate includes more than one factory and a
declaration form the Manufacturer stating that the sample(s) submitted for evaluation is (are)
representative of the products from each factory has been provided ......
When differences exist, they shall be identified in the General Product Information section.
Not
Applicable
Name and address of Factory(ies):
TCL TECHNOLY ELECTRONICS (HUIZHOU) CO
Issue Date:
2012-10-23
Page 7 of 50
Report Reference #
E204594-A37-CB-1
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
LTD
SEC 19
ZHONGKAI HIGH-TECH DEVELOPMENT ZONE
HUIZHOU
GUANGDONG 516006 CHINA
SEC 19
ZHONGKAI HIGH-TECH DEVELOPMENT ZONE
HUIZHOU
GUANGDONG 516006 CHINA
GENERAL PRODUCT INFORMATION:
Report Summary
All applicable tests according to the referenced standard(s) have been carried out.
Product Description
Equipment is a docking station with speakers used for music listening from Iphones or other compatible
devices, and also provides voltage for charging compatible devices.
devices, and also provides voltage for charging compatible devices.
Model Differences
N/A
Additional Information
Docking Station Speaker: JBL OnBeat Micro, is provided with external power supply, Kuantech Co., Ltd.,
Model KSAS0250059033D5, SELV/LPS output.
This report does not include the investigation of the power supply. A test report for the power supply may be
required when submitting this CB Test Report to a National Certification Body (NCB) for obtaining
certification at national level.
Model KSAS0250059033D5, SELV/LPS output.
This report does not include the investigation of the power supply. A test report for the power supply may be
required when submitting this CB Test Report to a National Certification Body (NCB) for obtaining
certification at national level.
Technical Considerations
The product was submitted and evaluated for use at the maximum ambient temperature (Tma)
permitted by the manufacturer’s specification of: 25 °C
permitted by the manufacturer’s specification of: 25 °C
The means of connection to the mains supply is: Not directly connected to Mains, Pluggable A
(External direct plug in Power supply)
(External direct plug in Power supply)
The following circuit locations (with circuit/schematic designation) were investigated as a limited
power source (LPS): All
power source (LPS): All
The following are available from the Applicant upon request: Installation (Safety) Instructions /
Manual
Manual
Issue Date:
2012-10-23
Page 8 of 50
Report Reference #
E204594-A37-CB-1
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
Abbreviations used in the report:
- normal condition ............................................ :
N.C.
- single fault condition ....................................... :
S.F.C
- operational insulation ..................................... :
OP
- basic insulation .............................................. :
BI
- basic insulation between parts of opposite
polarity:
polarity:
BOP
- supplementary insulation ............................... :
SI
- double insulation ............................................ :
DI
- reinforced insulation ...................................... :
RI
Indicate used abbreviations (if any)
Click on the first or last page to see other ON BEAT MICRO (serv.man3) service manuals if exist.