JBL ON BEAT MICRO (serv.man3) EMC - CB Certificate ▷ View online
Issue Date:
2012-10-23
Page 25 of 50
Report Reference #
E204594-A37-CB-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
3.5
Interconnection of equipment
Pass
3.5.1
General requirements
Pass
3.5.2
Types of interconnection circuits ........................... :
Interconnection circuits are
SELV/LPS Circuits
SELV/LPS Circuits
Pass
3.5.3
ELV circuits as interconnection circuits
No ELV interconnections.
N/A
3.5.4
Data ports for additional equipment
USB is only for charging
external devices. Output is
inherently LPS.
external devices. Output is
inherently LPS.
N/A
4
PHYSICAL REQUIREMENTS
Pass
4.1
Stability
N/A
Angle of 10°
N/A
Test force (N) ......................................................... :
N/A
4.2
Mechanical strength
N/A
4.2.1
General
Equipment is supplied by
external SELV/LPS adaptor.
external SELV/LPS adaptor.
N/A
Rack-mounted equipment
N/A
4.2.2
Steady force test, 10 N
N/A
4.2.3
Steady force test, 30 N
N/A
4.2.4
Steady force test, 250 N
N/A
4.2.5
Impact test
N/A
Fall test
N/A
Swing test
N/A
4.2.6
Drop test; height (mm) ........................................... :
N/A
4.2.7
Stress relief test
N/A
4.2.8
Cathode ray tubes
N/A
Picture tube separately certified ............................ :
N/A
4.2.9
High pressure lamps
N/A
4.2.10
Wall or ceiling mounted equipment; force (N) ....... :
N/A
4.2.11
Rotating solid media
N/A
Test to cover on the door....................................... :
N/A
Issue Date:
2012-10-23
Page 26 of 50
Report Reference #
E204594-A37-CB-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
4.3
Design and construction
Pass
4.3.1
Edges and corners
All edges and corners are
sufficiently rounded so as not
to constitute a hazard.
sufficiently rounded so as not
to constitute a hazard.
Pass
4.3.2
Handles and manual controls; force (N) ................ :
N/A
4.3.3
Adjustable controls
N/A
4.3.4
Securing of parts
N/A
4.3.5
Connection by plugs and sockets
N/A
4.3.6
Direct plug-in equipment
N/A
Torque ................................................................... :
N/A
Compliance with the relevant mains plug standard:
N/A
4.3.7
Heating elements in earthed equipment
N/A
4.3.8
Batteries
Consumer grade,
nonrechargeable lithium or
carbon-zinc, or
alkaline batteries are
considered safe under short-
circuiting
conditions and
therefore are not tested for
discharge; nor are such
batteries tested for leakage
under storage conditions.
Batteries not provided with
unit.
nonrechargeable lithium or
carbon-zinc, or
alkaline batteries are
considered safe under short-
circuiting
conditions and
therefore are not tested for
discharge; nor are such
batteries tested for leakage
under storage conditions.
Batteries not provided with
unit.
N/A
- Overcharging of a rechargeable battery
N/A
- Unintentional charging of a non-rechargeable
battery
battery
Protected by Q200, Q300 and
F300.
F300.
N/A
- Reverse charging of a rechargeable battery
N/A
- Excessive discharging rate for any battery
N/A
4.3.9
Oil and grease
N/A
4.3.10
Dust, powders, liquids and gases
N/A
4.3.11
Containers for liquids or gases
N/A
4.3.12
Flammable liquids .................................................. :
N/A
Quantity of liquid (l) ................................................ :
N/A
Flash point (°C) ...................................................... :
N/A
4.3.13
Radiation
No radiation hazard.
Pass
4.3.13.1
General
N/A
Issue Date:
2012-10-23
Page 27 of 50
Report Reference #
E204594-A37-CB-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
4.3.13.2
Ionizing radiation
N/A
Measured radiation (pA/kg) ................................... :
-
Measured high-voltage (kV) .................................. :
-
Measured focus voltage (kV) ................................. :
-
CRT markings ........................................................ :
-
4.3.13.3
Effect of ultraviolet (UV) radiation on materials
N/A
Part, property, retention after test, flammability
classification .......................................................... :
classification .......................................................... :
N/A
4.3.13.4
Human exposure to ultraviolet (UV) radiation ....... :
N/A
4.3.13.5
Lasers (including laser diodes) and LEDs
This product contains only
visible indicator LEDs (Class
1) operating in the range of
400 - 710 nm wavelength.
Indicating LEDs are low power
and did not require evaluation
to IEC 62471.
visible indicator LEDs (Class
1) operating in the range of
400 - 710 nm wavelength.
Indicating LEDs are low power
and did not require evaluation
to IEC 62471.
N/A
4.3.13.5.1
Lasers (including laser diodes)
N/A
Laser class ............................................................ :
(For indicator LEDs, see above
statement.)
statement.)
-
4.3.13.5.2
Light emitting diodes (LEDs)
Low power LED's exempt from
IEC 62471 evaluation
IEC 62471 evaluation
N/A
4.3.13.6
Other types ............................................................ :
N/A
Issue Date:
2012-10-23
Page 28 of 50
Report Reference #
E204594-A37-CB-1
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
TRF No. : IEC60950_1B
This report issued under the responsibility of UL
4.4
Protection against hazardous moving parts
N/A
4.4.1
General
No moving parts.
N/A
4.4.2
Protection in operator access areas ...................... :
N/A
Household and home/office document/media
shredders
shredders
N/A
4.4.3
Protection in restricted access locations ............... :
N/A
4.4.4
Protection in service access areas
N/A
4.4.5
Protection against moving fan blades
N/A
4.4.5.1
General
N/A
Not considered to cause pain or injury. a) ............. :
N/A
Is considered to cause pain, not injury. b) ............. :
N/A
Considered to cause injury. c) ............................... :
N/A
4.4.5.2
Protection for users
N/A
Use of symbol or warning ...................................... :
N/A
4.4.5.3
Protection for service persons
N/A
Use of symbol or warning ...................................... :
N/A
4.5
Thermal requirements
Pass
4.5.1
General
Pass
4.5.2
Temperature tests
(See appended table 4.5)
The equipment and its
component parts did not attain
excessive temperatures during
normal operation.
The equipment and its
component parts did not attain
excessive temperatures during
normal operation.
Pass
Normal load condition per Annex L ....................... :
Operated in the most
unfavorable way of operation
given in the operating
instructions until steady
conditions established.
unfavorable way of operation
given in the operating
instructions until steady
conditions established.
-
4.5.3
Temperature limits for materials
Pass
4.5.4
Touch temperature limits
Pass
4.5.5
Resistance to abnormal heat ................................. :
N/A
Click on the first or last page to see other ON BEAT MICRO (serv.man3) service manuals if exist.